Gamber-Johnson 7170-0166-02 Manual de Usario

Lee a continuación 📖 el manual en español para Gamber-Johnson 7170-0166-02 (3 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/3
Rev.N
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
RELOCATION
Top Plate
USB/Audio
Center Brace
12v Knockouts
Center Brace
Top Plate
12v Knockouts
INST-568
1/3
Form
If there is no factory front console plate
7120-0630(included) for required hardware
(Top Plate) installed, use hardware bag
Product Revision
FORD NGPI CONSOLE SEDAN & UTILITY, 2012+
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Printing Spec:
7160-0410, 7160-0412, 7170-0165, 7170-0166
INSTALLATION INSTRUCTIONS
Note:
NOTE: ARMREST AND
CUP HOLDER SHOWN
FOR REF. ONLY
© copyright 2018 Gamber-Johnson, LLC
PS-004
Sedan:
1. Remove the stock tunnel plate by removing the
6 bolts.
2. The harness on the right side of the YAW sensor
(located on the transmission tunnel) may impede
box installation. For ease of installation, pull up
on harness to disconnect the push fastener
attaching the harness to the transmission tunnel.
3. The rear mounting points may be hidden under
the flooring. Carefully cut the flooring as shown
to expose the mounting points (Fig 1).
4. Slide console box into place.
5. Attach console to transmission tunnel using OEM
hardware.
Fig 1 - Rear Mounting Bracket, Carpet Cut to Revel Threaded Inserts
Utility:
1. Remove the lower dash trim panels on either side
of the dash (Fig 2).
2. Remove the stock tunnel plate by removing the 6
bolts.
3. Remove the USB/Audio/12v jack Trim Panel (Fig 2)
and disconnect the USB, Audio and 12v cables.
4. Relocate OEM Module to under dash area (Fig. 3)
Fig 2 - Utility Lower Dash
5. The harness on the right side of the YAW sensor
(located on the transmission tunnel) may impede
box insallation. For ease of installation, pull up
on harness to disconnect the push fastener attaching
the harness to the transmission tunnel.
6. Remove the Top Plate from the console box.
7. Slide the console box into place.
8. Attach the console to the transmission tunnel using
the OEM hardware.
9. Attach the Lower Dash Trim Panel to the console box
by placing the lower lip of the Trim Panel into the
hook on the bottom of the console box (Fig 4).
10. Attach the top of the Lower Dash Trim Panel to the
console box using the supplied Trim Hooks (Fig 4).
Note that the left Trim Hook has an "L" cut out of it.
It may be easier to remove the Top Plate when
installing the Lower Dash Trim Panels.
11. Snap the Lower Dash Panels back into place.
2/3
Lower Dash
Trim Panel
USB/Audio
Trim Panel
Fig. 3 - OEM Module located on backside of trim Panel
Lower Dash Trim Panel
Hooked into Console Box
Left Trim Hook
Fig 4 - Installing Lower Dash
Trim Panels
Sedan and Utility:
Install the armrest (7160-0409 & 7160-0411) into the tube and adjust to the desired
height/orientation then tighten the bolt under the armrest. Note: Armrest is not included with
7160-0410 or 7160-0412 but can be ordered separetly. The armrest mounting bracket can be
flipped over to lower the armrest if desired or if used with a Printer Armrest.
The cup holder (MCS-INTCUP) can be placed anywhere along the horizontal length of the box.
Note: The cup holder is not included with 7160-0410 or 7160-0412 but can be ordered separetly.
The Top Plate and Center Brace on both console boxes are designed to be removable to aid in
installation and cable routing. If either item is removed Gamber-Johnson recommends
reinstalling the screws with a drop of Blue 242 Loctite to prevent loosening. Torque the (4) top
plate bolts to 65-80 in-lbs when reinstalling.
Both boxes have knockouts for 12v accessory outlets (7160-0063). To install simply punch out
the desired knockout and install the 12v outlet. The 12v outlet will need to be hardwired into
the vehicles power system. An additional 12v accessory outlet can be purchased for the second
knockout if desired.
3/3

Especificaciones del producto

Marca: Gamber-Johnson
Categoría: No categorizado
Modelo: 7170-0166-02

¿Necesitas ayuda?

Si necesitas ayuda con Gamber-Johnson 7170-0166-02 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Gamber-Johnson Manuales

No categorizado Manuales

Últimos No categorizado Manuales