Golden Lighting Olympia 1648-M1L BUS Manual de Usario

Golden Lighting Alivio Olympia 1648-M1L BUS

Lee a continuación 📖 el manual en español para Golden Lighting Olympia 1648-M1L BUS (2 páginas) en la categoría Alivio. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
Mounting strap Mounting Screw Mounting screw
1ea 4" 2ea 8/32"X28mm 2ea 8/32X1"
Wire connnector Hex Nut Deco nut (round
nut)
3ea P4 Orange 2ea 8/32"X3.5mm 2ea @12mm
Canopy Rod Rod
1ea 130 Dia*H70mm 3ea 12.7mmDia* H12“ 1ea 12.7mmDia* H6”
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
For Customer Service, contact the place of purchase to arrange for replacement parts.
FIXTURE ASSEMBLY INSTRUCTIONS
Read and review installation instruction sheet before
assembling the fixture. 1648-M1L BUS
1. By measuring determine correct number of rods needed
for proper hanging height.
* This fixture includes 4 rods (6", 12", 12", 12")
2. To shorten the fixture; slide the excess rods off the
wires. To lengthen add additional rods.
3. Pull the fixture’s wires through the rods (H,I,J,K) until
taut and thread the rods together. Then thread to the
fixture body (L) and the swivel joint on Canopy (G).
4. Slide the glass shade (M) over Socket of fixture body
(L)and secure it by threading the Socket ring (N) on until
tight.
5. Install the light bulb in accordance with the fixture's
specification.
(DO NOT EXCEED THE MAXIMUM WATTAGE RATING)
Fig. 1
NOTE: INSTALL THE GLASS ASSEMBLY
AFTER THE FIXTURE IS HUNG.
PARTS & ASSEMBLY SHEET
Fixture Name: Olympia 1648-M1L BUS
This fixture assembled PO:__________ Date: ________
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
below to be filled out by retailer
These three
rods may be
removed.
Bulb (Not provided)
For Customer Service, contact the place of purchase to arrange for replacement parts.
INSTALLATION INSTRUCTIONS
Fixture Name: Olympia 1648-5/9/M3/M1L BUS
For Pendant Light Fixture
WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER.
Fig. 1
Fig. 2
Fig. 3
HANGING THE FIXTURE (Fig. 1)
1. Carefully remove the new fixture from the carton and the
yellow bag that holes all your parts. Check that all parts are
included as shown in the illustration and parts list.
2. Shut off power at the circuit breaker and remove the old
fixture from wall, including the old mounting strap.
3. The Mounting Strap (A) contains several pairs of threaded
holes, find the pair of holes that match the holes spacing in
your fixture Canopy (G) and thread the two Mounting Screws
(B) into the Mounting Strap (A). Secure with Hex nuts (C).
These will have their threaded ends protrude through the two
holes in the fixture canopy.
4. Place the Mounting Strap (A) over the Junction Box (E) so
the Mounting Screws (B) are vertical or horizontal, as required
by fixture type.
5. Attach the Mounting Strap (A) to the Junction Box (E) by
using the two Mounting screws (D). Tighten the screws securly.
CONNECTING THE WIRES (Fig. 2)
5. Attach the power supply wires to the fixture lead wires by
connecting BLACK to BLACK (or SMOOTH) and WHITE to
WHITE (or RIBBED).
6. Attach the GROUND wire(GREEN or COPPER) from the
Junction Box and the fixture Ground wire to the green Ground
Screw on the Mounting Bracket (A) or connect both wires
together using the correct size of wire connectors.
NOTE: Twist the wires together in the same direction you twist
the wire connector onto the wires.
7. Tuck these wire connections neatly into the Junction Box.
FINISHING THE INSTALLATION (Fig. 3)
9. Place the fixture Canopy (G), over the Mounting screws (B),
so they protrude through the holes in the Canopy (G).
10. Thread the Deco Nuts (F) onto the Mounting Screws (B)
and continue turning until the Canopy (G) is snug against the
ceiling.
11. Install glass shades as per the fixture assembly
instructions.
YOUR INSTALLATION IS NOW COMPLETE.
RETURN POWER TO THE JUNCTION BOX AND TEST THE
FIXTURE.
BARE COPPER
(Ground)
GREEN
(Ground)
FIXTURE WIRES
SMOOTH (BLACK)
RIBBED (WHITE)
BLACK
WHITE
HOUSE WIRES

Especificaciones del producto

Marca: Golden Lighting
Categoría: Alivio
Modelo: Olympia 1648-M1L BUS

¿Necesitas ayuda?

Si necesitas ayuda con Golden Lighting Olympia 1648-M1L BUS haz una pregunta a continuación y otros usuarios te responderán




Alivio Golden Lighting Manuales

Alivio Manuales

Últimos Alivio Manuales