GRE PLREB Manual de Usario
GRE
Verlichting
PLREB
Lee a continuación 📖 el manual en español para GRE PLREB (44 páginas) en la categoría Verlichting. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/44
INSTALLATION AND MAINTENANCE MANUAL
MANUAL DE INSTALACIÓN Y MANTENIMIENTO
MANUEL D’INSTALLATION ET D’ENTRETIEN
EINBAU-UND BETRIEBSANLEITUNG
MANUALE DI INSTALAZIONE E MANUTENZIONE
INSTALLATIE- EN ONDERHOUDSHANDLEIDING
MANUAL DE INSTRUÇÕES E MANUTENÇÃO
RAPID PROJECTOR
PROYECTOR RAPID
PROJECTEUR RAPID
PROIETTORE RAPID
STRAHLER RAPID
SCHIJNWERPER RAPID
PROJETOR RAPID
GB
E
FR
D
I
NL
P
Ref. PLREC / PLREB
2
ENGLISH
IMPORTANT: The instruction manual you are holding includes essential information on the safety measures to be im-
plemented for installation and start-up. Therefore, the installer as well as the user must read the instructions before
beginning installation and start-up.
Keep this manual for future reference.
To achieve optimum performance of the LED Rapid Projector, follow the instructions provided below:
1. VERIFY THE CONTENTS OF THE PACKING:
The following accessories are included inside the box:
• Unit projector • Warranty booklet • Nozzle
•
1” 1/2 adaptor
• Installation and maintenance manual • Stufng box hose
• Manual for electrical connection • Spanner for adaptor
2. GENERAL CHARACTERISTICS:
This projector has been designed to be used totally submerged in water. It is a Class III electric apparatus with very low
safety voltage (12V with alternating current).
The projector compiles with IPX8 degree of protection (resistance to penetration of dust, solid bodies and humidity) at a
nominal immersion depth of 2 m.
This projector compiles with international safety standards for lights, especially the EN 60598-2-18 standard. LIGHTS
PART 2: SPECIFIC REQUIREMENTS SECTION 18 LIGHTS FOR SWIMMING POOLS AND SIMILAR APPLICATIONS.
The manufacturer is not responsible in any circumstances for assembly, installation or start-up of any electric components
which have been inserted or handled at locations other than its own premises.
3. INSTALLATION:
• To correctly light a swimming pool we recommend you:
Install a projector in the range LED Rapid every 20 m² of water surface.
Note: Recommendation valid for light coloured pools. In darker coloured pools or stainless steel pools we recommend
oversizing the proportion of projectors per m².
• In order to prevent glare, the projectors should be installed so that they face away from the residence or usual view of
the swimming pool.
• In the event that lighting is used in training or competition pools, the projectors should be installed on the sides to
prevent glare on the swimmers.
• The spotlight should not be handled internally under any circumstances as this would lead to losing the guarantee.
• The LED Rapid projector has been designed to be fitted to the bushing or piping; a siphon can be made or the stuffing
box kit installed (Fig. 1).
• The projector should be tted 400–700 mm under the surface of the water on one of the pool walls (Fig. 1). The way the
projector is tted will depend on whether the bushing or piping is used.
• Sealing all sections with resin systems or safety connections that comply with the IP68 rating is recommended to ensure
that both cables and cable sheaths are properly sealed. Failure to follow these steps may cause short- or long-term da-
mage to the light and installation cables.
4. ASSEMBLY:
Procedure:
1 - Install the bushing as shown in Figure 2; A (siphon) / B (Kit 65286).
2- Screw the adaptor into the bushing (Fig. 3).
2 - Insert the cable in the bushing, ease the projector in and turn 90º clockwise (Fig. 3).
3 - Ensure that the logo is uppermost (Fig. 4).
Replacing the projector
1. Give a quarter of a turn anti-clockwise, remove the projector until it has come out of the adaptor (Fig. 5b) and place it
on the edge of the pool.
2 - Loosen the stufng box assembly and then the wire connector; it is very important to follow the steps as shown (Fig. 6).
3- Reconnect the projector.
5. MAINTENANCE:
This lamp does not require any type of maintenance work. If you notice that the lamp is not working properly, please contact our
customer attention service.
3
THIS PRODUCT DOES NOT CONTAIN ANY ELEMENTS THAT CAN BE HANDLED, DISMANTLED OR REPLACED BY THE USER.
IT IS FORBIDDEN TO ACCESS INSIDE THE PRODUCT, OTHERWISE THE GUARANTEE OF THE PRODUCT WILL BECOME
INVALID.
6. SAFETY AND MAINTENANCE WARNINGS:
• Before any handling ensure that there is NO voltage supplied to the projector.
• People in charge of assembly should be suitably qualied for this type of work.
• Avoid making contact with the electric voltage.
• Comply with the current standards regarding accident prevention.
• In this regard, the IEC 364-7-702 standards must be observed: WIRING IN BUILDINGS SPECIAL WIRING SWIMMING
POOLS.
• Do not handle with wet feet.
• Do not clean using abrasive products that could damage the projector.
• The LEDs in this projector are classied as risk group 2.
• Under no circumstances should the luminaire be stared into for one minute or more at distances equal to or less than
20 cm. Doing so could damage eyesight.
7. ASSEMBLY AND FUNCTIONING WARNINGS:
• Maximum water temperature 40ºC.
• It is not recommended the use of sealing putty in this product and, anyway, you should use only products specically
conceived to work with ABS, all those products of universal use remain excluded.
• The projector is designed TO OPERATE ONLY WITH A SAFETY TRANSFORMER.
• The manufacturer is not responsible in any circumstances for assembly, installation or start-up of any electric compo-
nents which have been inserted or handled at locations other than its own premises.
• It is responsibility of the installer to ensure that no water gets inside the projector by means of the cables.
• This projector is seawater resistant.
• This projector is resistant to pool treatments described below, always that the concentration values do not exceed the
following levels:
TYPE OF TREATMENT CONCENTRATION IN WATER
Chlorine 2 mg/l
Bromine 5 mg/l
Attention : Please note that the Ph of pool water always must be between 7.2 and 7.6.
8. ENVIRONMENTAL INFORMATION Processing of electrical and electronic equipment after their period of use (Only
applicable in the E.U.)
In order to reduce the amount of waste of electric and electronic apparatus, to reduce the danger of components,
to encourage the reuse of apparatus, to assess waste and to set up a suitable waste treatment system, with the
aim of improving the efciency of environmental protection, a set of rules has been established applicable to the
manufacture of the product and other rules regarding the correct environmental treatment when these products
become waste.
It is also intended to improve the environmental practices of all agents involved in electrical and electronic goods,
including manufacturers, distributors, users and particularly those directly involved in the treatment of waste
derived from these apparatus.
From 13th August 2005, there are two ways of disposing of this apparatus:
• if you purchase a new equivalent apparatus or which has the same functions as the one you wish to dispose of, you can hand
it over, free of charge, to the distributor when making your purchase, or
• you can take it to local collection points.
We shall cover waste treatment costs.
The apparatus are labelled with a symbol of a “crossed-out waste container”. This symbol means that the apparatus is subject
to selected waste collection, different from general waste collection.
Our products are designed and manufactured with top-quality, environmental-friendly materials and components, which can
be reused and recycled. In spite of this, several parts of this product are not biodegradable and therefore it should not be
left in the environment. For the correct recycling of this product, please completely detach the electrical motor from the rest
of the ltration equipment.
Especificaciones del producto
Marca: | GRE |
Categoría: | Verlichting |
Modelo: | PLREB |
¿Necesitas ayuda?
Si necesitas ayuda con GRE PLREB haz una pregunta a continuación y otros usuarios te responderán
Verlichting GRE Manuales
17 Agosto 2024
9 Agosto 2024
19 Julio 2024
Verlichting Manuales
- Verlichting LG
- Verlichting Bosch
- Verlichting IKEA
- Verlichting Philips
- Verlichting DeWalt
- Verlichting Ansmann
- Verlichting Reflecta
- Verlichting Qazqa
- Verlichting Brennenstuhl
- Verlichting KonstSmide
- Verlichting Workzone
- Verlichting LivarnoLux
- Verlichting Generac
- Verlichting Makita
- Verlichting Nedis
- Verlichting Miomare
- Verlichting Crivit
- Verlichting Eglo
- Verlichting Lucide
- Verlichting Caliber
- Verlichting SereneLife
- Verlichting OK
- Verlichting Dyson
- Verlichting SilverStone
- Verlichting Ryobi
- Verlichting TP Link
- Verlichting BeamZ
- Verlichting Logik
- Verlichting Anslut
- Verlichting Trust
- Verlichting Elro
- Verlichting EMOS
- Verlichting KlikaanKlikuit
- Verlichting Beper
- Verlichting Denver
- Verlichting GLP
- Verlichting Hama
- Verlichting Theben
- Verlichting Chamberlain
- Verlichting Megaman
- Verlichting Velleman
- Verlichting Eheim
- Verlichting GlobalTronics
- Verlichting Smartwares
- Verlichting American DJ
- Verlichting Steren
- Verlichting Perel
- Verlichting Engenius
- Verlichting Steinel
- Verlichting Livarno
- Verlichting Watshome
- Verlichting Black Diamond
- Verlichting Melinera
- Verlichting Adj
- Verlichting Biltema
- Verlichting Nitecore
- Verlichting Mio
- Verlichting Novy
- Verlichting In Lite
- Verlichting Cotech
- Verlichting Viessmann
- Verlichting Maul
- Verlichting Sigma
- Verlichting Behringer
- Verlichting Godox
- Verlichting Goobay
- Verlichting Chacon
- Verlichting Astro
- Verlichting Massive
- Verlichting Planet
- Verlichting Gamma
- Verlichting Lexon
- Verlichting Steinhauer
- Verlichting CAT
- Verlichting QTX
- Verlichting Zuiver
- Verlichting Reer
- Verlichting Tesy
- Verlichting Ikan
- Verlichting Chauvet
- Verlichting Blumfeldt
- Verlichting Corsair
- Verlichting GVM
- Verlichting Omnitronic
- Verlichting HQ
- Verlichting Max
- Verlichting Nanlite
- Verlichting Showtec
- Verlichting Profoto
- Verlichting Trio Lighting
- Verlichting Ranex
- Verlichting Eurolite
- Verlichting Infinity
- Verlichting REV
- Verlichting Dymond
- Verlichting Rocktrail
- Verlichting Friedland
- Verlichting Nexxt
- Verlichting HQ Power
- Verlichting Stairville
- Verlichting Crestron
- Verlichting Litecraft
- Verlichting Garden Lights
- Verlichting Shada
- Verlichting Swisstone
- Verlichting Monacor
- Verlichting Brandson
- Verlichting Martin
- Verlichting KS
- Verlichting Dydell
- Verlichting Trump Electronics
- Verlichting Osram
- Verlichting Botex
- Verlichting Levita
- Verlichting Dorr
- Verlichting Ludeco
- Verlichting Paulmann
- Verlichting Heirt
- Verlichting Kogan
- Verlichting Lenoxx
- Verlichting Cameo
- Verlichting XQ-Lite
- Verlichting LYYT
- Verlichting Wetelux
- Verlichting Digipower
- Verlichting V-Tac
- Verlichting Century
- Verlichting Lideka
- Verlichting IXL
- Verlichting Fun Generation
- Verlichting Meipos
- Verlichting Livarno Lux
- Verlichting Mr. Beams
- Verlichting 4K5
- Verlichting Lightway
- Verlichting LightZone
- Verlichting Varytec
- Verlichting Brilliant
- Verlichting Karwei
- Verlichting Delock Lighting
- Verlichting LightPro
- Verlichting FlinQ
- Verlichting Outspot
- Verlichting Innr
- Verlichting Fristom
- Verlichting SSV Works
- Verlichting ETC
- Verlichting Megatron
- Verlichting MeLiTec
- Verlichting Integral LED
- Verlichting Hoftronic
- Verlichting SmallRig
- Verlichting Light4Me
- Verlichting GEV
- Verlichting HERA
- Verlichting Astera
- Verlichting Excello
- Verlichting Aveo Engineering
- Verlichting Fiilex
- Verlichting Weeylite
- Verlichting Sonneman
Últimos Verlichting Manuales
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024