HELGI HLG0388 Manual de Usario
HELGI
extensor AV
HLG0388
Lee a continuación 📖 el manual en español para HELGI HLG0388 (4 páginas) en la categoría extensor AV. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/4
Please read below safety instructions carefully before installation and
operation:
1. Please pay attention to all the warnings and hints on this device.
2. Do not expose this unit to rain, moisture and liquid.
3. Do not put any stuff into the device.
4. Do not repair the device or open the enclosure without professional
person guidance to avoid electronic shock.
5. Make sure good ventilation openings to avoid product overheating
damage.
6. Shut off power and make sure environment is safe before installation.
7. Do not plug-in/out the network cables and IR cables when it is in
using to avoid cables damage.
8. Use DC5V only. Make sure the specification matched if using 3
party DC adapters.
HDMI Extender TX
sender*1pcs
HDMI Wireless -Extender 50M
HDMI Extender RX
receiver*1pcs
DC5V/2A power
adapter*2pcs
IR blaster extension
cable*1pcs
1. HDMI Extender TX sender
User manual
•Important safety notice
rd
This transmitter extends HDMI signal wirelessly from source device to
display device up to 0meters with the advanced application of HD itT 5 b
transport protocol and wireless technology. It requires no cables
between sender (TX) and receiver (RX) which makes the installation
easy and clean.
•Introduction
Note:
1) Transmission distance will be different due to the environment.
2) Wall, brick or glass will shorten the signal cover range or cause big
signal loss.
1. Transmit HDMI signal from source device to display device up to
50meters wirelessly.
2. Support IR remote control function to control source device content
from long distance.
3. No cable between sender(TX) and receiver(RX).
4. Easy and clean installation.
•Features
•Package contents
IR receiver extension
cable*1pcs
User manual*1pcs
1. HDMI source device (DVD, PS3, Set top box, PC etc)
2. HDMI display device like SDTV, HDTV, and projector with HDMI port.
•Installation Requirement
•Panel description
Power led It lights when power is on
Data transmission
led
Led blinks slowly when it is building connection. Led blinks fast
when it is successfully connected and transmitting data
Connection led It lights when wireless signal is well connected
Power input Connect with DC5V/2A power adapter
Reset Press reset button to restart the device
HDMI input Connect with HDMI source device
IR blaster extension
cable interface
Connect with IR blaster extension cable. Please put the IR blaster
close to source device to best transmit the IR signal from receiver
Antenna Launch wireless signal
2 E. HDMI xtender RX receiver
DVD
HDMI Cable TV
Connection instruction:
1). Connect HDMI input with HDMI source device and connect IR blaster
extension cable with IR OUT interface of the sender (TX).
2). Connect HDMI output with HDMI display device and connect IR
receiver extension cable with IR IN interface.
3). Power on the device (power led lights) and it works.
Note:
1） When the wireless signal transmits through wall, glass or other
obstacles, it will cause signal loss. Suggest installing this device in
good environment with few obstacles.
2） The external environment wireless signal interfere the transmission,
such as micro waver, wireless mouse and keyboard etc.
Specification
HDMI signal Full compatible with HDCP
Support resolution 480i@6 0Hz, 48 0 p@60H z, 576i@50Hz, 5 76p@50 Hz,
720p @50/60H z, 1080i@50/60 Hz, 108 0 p@50/6 0Hz
Transmit distance Up to 50m for 1080p 60Hz
IR remote control Support 2 0~6 0kH z IR remo te device
Working temperature 0℃ 60℃～
Power supply DC5V/2A *2PCS
Power consumption TX: 8.5W; RX: 5.5W
Product dimension
Weight
Color
195.4(W) x 137.5(D) x 30.8(H)mm *2PCS
Items
Black
TX: 531g RX: 528g
Enclosure material Metal
Transport protocol HDbitT
Power led It lights when power is on
Data transmission
led
Led blinks slowly when it is building connection. Led blinks fast
when it is successfully connected and transmitting data
Connection led It lights when wireless signal is well connected
Power input Connect with DC5V/2A power adapter
Reset Press reset button to restart the device
HDMI output Connect with HDMI display device
IR receiver extension
cable interface
Connect with IR receiver extension cable. Please make sure the
remote control is within the required range of IR receiver
Antenna Receive wireless signal
• Connection
HDMI Extender
TX sender
HDMI Extender
RX receiver
• FAQ
Q: TV display “waiting for connection” on the bottom right corner?
A: Please check if the power supply of TX (sender) and RX(receiver) is well
connected and the power indicator led lights on.
Q: TV display “Please check the TX input signal”?
A: 1) please check if there is an HDMI signal input of sender TX
2) Try to connect the signal source directly to display device to see if there
is signal output from source device or change the signal source, HDMI
cables and try again.
Q: Display not fluent and stable?
A: 1) Please move the position of sender (TX) and receiver (RX) and make sure
the device is within the required signal range.
2) Click “reset” button on the RX/RX panel, reset and reconnect.
3) Remove other wireless signal disturbance and reduce the obstacles on
the way.
• Specification
The product name and brand name may be registered trademark of related
manufacturers.TM and ® may be omitted on the user manual. The pictures
on the user manual are just for reference,and there may be some slight
difference with the real products.
We reserve the rights to make changes without further notice to a product
or system described herein to improve reliability, function or design.
Disclaimer
HDMI Cable
Especificaciones del producto
| Marca: | HELGI |
| Categoría: | extensor AV |
| Modelo: | HLG0388 |
¿Necesitas ayuda?
Si necesitas ayuda con HELGI HLG0388 haz una pregunta a continuación y otros usuarios te responderán
extensor AV HELGI Manuales
3 Septiembre 2024
3 Septiembre 2024
3 Septiembre 2024
3 Septiembre 2024
3 Septiembre 2024
3 Septiembre 2024
3 Septiembre 2024
3 Septiembre 2024
3 Septiembre 2024
3 Septiembre 2024
extensor AV Manuales
- extensor AV Philips
- extensor AV Abus
- extensor AV Allnet
- extensor AV Nedis
- extensor AV Eminent
- extensor AV Manhattan
- extensor AV Black Box
- extensor AV Tripp Lite
- extensor AV Vision
- extensor AV DataVideo
- extensor AV Techly
- extensor AV Bogen
- extensor AV Matrox
- extensor AV Steren
- extensor AV Digitus
- extensor AV LevelOne
- extensor AV Planet
- extensor AV Konig
- extensor AV D-Link
- extensor AV One For All
- extensor AV Marmitek
- extensor AV Genexis
- extensor AV ATen
- extensor AV Gefen
- extensor AV Peerless
- extensor AV Adder
- extensor AV Monoprice
- extensor AV Crestron
- extensor AV Smart-AVI
- extensor AV StarTech.com
- extensor AV SIIG
- extensor AV Polycom
- extensor AV Micro Connect
- extensor AV Extron
- extensor AV KanexPro
- extensor AV Intelix
- extensor AV ASSMANN Electronic
- extensor AV Blustream
- extensor AV Avocent
- extensor AV Intellinet
- extensor AV Ebode
- extensor AV Ecler
- extensor AV Rose Electronics
- extensor AV Epcom
- extensor AV Kramer
- extensor AV CYP
- extensor AV TV One
- extensor AV SmartAVI
- extensor AV IMG Stage Line
- extensor AV Lindy
- extensor AV Atlona
- extensor AV Lightware
- extensor AV Vivolink
- extensor AV AMX
- extensor AV WyreStorm
- extensor AV Rocstor
- extensor AV MuxLab
- extensor AV Seco-Larm
- extensor AV ConnectPro
- extensor AV Kanex
- extensor AV TechLogix Networx
- extensor AV C2G
- extensor AV SEADA
- extensor AV Comprehensive
- extensor AV PureLink
Últimos extensor AV Manuales
27 Octubre 2024
27 Octubre 2024
22 Octubre 2024
22 Octubre 2024
20 Octubre 2024
19 Octubre 2024
19 Octubre 2024
18 Octubre 2024
18 Octubre 2024
18 Octubre 2024