HK Audio Linear 5 MK II 118 Sub A Manual de Usario

HK Audio Altavoz de subgraves Linear 5 MK II 118 Sub A

Lee a continuación 📖 el manual en español para HK Audio Linear 5 MK II 118 Sub A (4 páginas) en la categoría Altavoz de subgraves. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

LINEAR 5 MK II 118 Sub A

THE ALL-PURPOSE WORKHORSE

LINEAR 5 MK II 118 Sub A

Birch multiplex bass reflex subwoofer with more sound pressure

Part number: 1008006

The LINEAR5 118 Sub A bass reﬂ ex subwoofer with 18" driver MK II

and 4" voice coil is the most powerful solution for LINEAR5 MK II

systems with its uncompromising performance and dry, deﬁ ned bass

reproduction down to the lowest of the lows.

A remote-controllable high-performance DSP with integrated, directly

selectable presets, such as the Cardioid 1:1 vertical and Cardioid 1:1

horizontal settings, give users an enormously expanded scope for

system conﬁ guration at any time. The DSP Out can transmit the

processed signal from the subwoofer to a non-network-compatible

speaker. Cardioid setups can be implemented easily and without

measurement technology: simply set up, select a preset, and you’re

done! The stereo preamp makes conﬁ guring 2.1 setups straightforward

and convenient.

With more power, a deeper frequency response and a solid birch

multiplex enclosure, the LINEAR5 MKII 118 Sub A is a powerful and

robust partner for bands, DJs and sound technicians.

Features

• Class-D power amp with stereo preamp and 2000 W peak power

• Two lockable, balanced XLR/TRS Combo inputs, balanced XLR outputs

for analogue loop-through to an additional speaker

• Remote-controlled high-performance DSP with integrated, directly se-

lectable Remote and Cardioid presets (Front, 1:1 vertical, 1:1 horizontal,

Remote)

• Extensive DSP tools: fully parametric 10-band EQ with variable ﬁ lter

characteristics, High-Pass Filter, Low-Pass Filter, Polarity, Level, Delay,

Limiter, Mute

• DSPOut: balanced XLR output that transmits the processed signal

from the speaker to a non-network-compatible speaker. The audio sig-

nal applied here can be extensively modiﬁ ed using the DSP CONTROL

software

• Professional, lockable EtherCon connectors for connection to a Mac or

PC to control the system, daisy chain connections possible

• M20 thread for mounting pole

• Enclosure made of birch multiplex

• Lockable V-Lock mains cable

• Made in Germany

LINEAR 5 MK II 118 Sub A

Technical data

LINEAR 5 MK II 118 Sub A

Max. SPL @ 10 % THD 130dB half space (42Hz – 100Hz averaged)

Max. SPL Peak @ 10 % THD 131dB halfspace

Frequency response +/-3 dB 42 Hz – X-over

Frequency response -10dB 38 Hz – X-over

Power amp output (RMS/Peak) 1,000 / 2,000 W

Ampliﬁ er type Class D

Woofer 1x18", 4" voice coil

Low/mid speaker -

HF driver -

Horn characteristics -

Active x-over frequency -

Maximum input level 20dBu

Analogue inputs 2x XLR combo balanced

Analogue Thru 2x XLR balanced

DSP Out 1x XLR balanced

Network port EtherCON RJ45, 1x In, 1x Thru

Filter presets Front, Cardioid 1:1 vertical, Cardioid 1:1 horizontal, Remote

Remote software DSP CONTROL (Windows, Mac OS)

DSP functions Fully parametric 10-band EQ with variable filter characteristics,

Low-Pass Filter, Polarity, Level, Delay, Limiter, Mute

Sample rate 48kHz

System latency Less than 2ms

Mains connection 1x IEC connector with V-Lock securing system, 100-240 V

Power consumption 1.9A / 100–240V nominal according to EN 62368-1

Set-up angle (Monitor mode) -

Pole mount 1x M20

Rigging points -

Carrying handles 2x MultiGrip

Housing Birch multiplex

Surface Black acrylic enamel

Front grille 2 mm metal grille backed with black acoustic foam

Dimensions (WxHxD) 55 x 56 x 68.5 cm

21-21/32 x 22-3/64 x 26-31/32"

Weight 41.6kg / 91.71lbs

LINEAR 5 MK II 118 Sub A

Optional accessories

Tilt-Unit

Part number: 1007972

The Tilt Unit allows the mid/high units to be tilted directly on the subwoofer without a mounting pole. Like a mounting pole, the Tilt Unit is screwed directly into the M20 mount of the

LINEAR5 SUB This means that the DuoTilt can also be used at tilt angles of both -3° and -7° in a stack setup, and the Tilt-Unit prevents the mid/high units from MKII .

slipping.

LINEAR 5 MK II Weather Protective Cover 118 Sub A

Part number: 1008049

Made to measure and equipped with many practical details, the WeatherProtectiveCovers are the perfect protection against moisture and humidity, and at the same

time a sturdy transport cover for all LINEAR5 MKII mid/high units and subwoofers.

Behind the front ﬂ ap, a waterproof acoustic gauze protects the front of the speakers and the drivers without a ecting the systems’ sound. The front ﬂ ap can be securely

velcroed to the side of the speaker without interfering with stacking, clustering or cardioid setups.

On the rear, sturdy, transparent viewing windows keep water away from the electronics, but ensure the settings can be read at all times and provide access to the controls

as well as a cable entry.

The handles can still be used thanks to sealable recesses or notches. Lockable access to the thread for the mounting poles is also included. The cut-out is kept as small as

possible and can be easily sealed if necessary. Su cient ventilation of the electronics is ensured at all times.

• Tough rain and transport protection with easy handling

• Controls can be read and accessed at all times through transparent viewing windows

• Mounting poles can be used and installed with the protective cover in place

• Sturdy and discreet design

• Custom-ﬁ t covers are available for all LINEAR5 MKII series units

Accessories for rigging and mounting