Honeywell HCE351 Manual de Usario

Honeywell cocina HCE351

Lee a continuación 📖 el manual en español para Honeywell HCE351 (21 páginas) en la categoría cocina. Esta guía fue útil para 16 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/21

IMPORTANT SAFETY

INSTRUCTIONS

WARNING – READ AND SAVE THESE OPERATING

AND SAFETY INSTRUCTIONS BEFORE USING THIS

HEATER. IF YOU DO NOT UNDERSTAND THESE

INSTRUCTIONS OR PRODUCT LABELS PLEASE

CALL OUR CUSTOMER REPRESENTATIVES AT

(800) 477-0457 FOR ASSISTANCE BEFORE USING

THIS PRODUCT.

Warning – Failure to follow any of these safety

instructions could result in fire, injury, or death.

YOUR RESPONSIBILITIES

Electrical appliances may expose people to hazards

that can cause severe injury as well as death.

The use of electrical products may create hazards

that include, but are not limited to, injury, fire,

electric shock and electrical system damage. These

instructions are intended to provide you with the

information you need to use the product correctly

and to avoid such hazards.

When using electrical appliances, basic

precautions should always be followed to

reduce risk of fire, electric shock, and injury

to persons including the following:

1. Warning – Read all instructions before using

this heater.

2. Warning – This heater is hot when in use.

To avoid burns, DO NOT let bare skin touch

hot surfaces. Use handles when moving this

heater. Keep combustible materials, such as

furniture, pillows, bedding, papers, clothes,

and curtains at least 3 feet (0.9 m) from the

front of the heater and keep them away from

all sides of the heater.

3. Warning – Extreme caution is necessary

when any heater is used by or near children

or invalids, and whenever the heater is left

operating and unattended.

4. Warning – ALWAYS unplug heater when not

in use.

5. Warning – DO NOT operate any heater with

a damaged cord or plug, any heater that

malfunctions, or any heater that has been

dropped or damaged in any manner. Discard

heater or return heater to authorized service

facility for examination and/or repair.

6. Warning – For residential use only.

7. Warning – DO NOT use outdoors.

8. Warning – This heater is not intended for use

in bathrooms, laundry areas, and similar indoor

locations. DO NOT locate heater where it may

fall into a bathtub or other water container.

9. Warning – DO NOT run cord under carpeting.

DO NOT cover cord with throw rugs, runners,

or similar coverings. DO NOT route cord under

furniture or appliances. Arrange cord away

from traffic areas and where it will not be a

tripping hazard.

CeramiC Tower HeaTer

HCe300 SerieS

Honeywell is a trademark of Honeywell International Inc., used under license by Helen of Troy Limited.

Honeywell International Inc., makes no representation or warranties with respect to this product.

ABOUT CERAMIC TECHNOLOGY

10. Warning – This appliance has a polarized plug

(one blade is wider than the other). To reduce

the risk of electric shock, this plug is intended

to fit in a polarized outlet only one way. If the

plug does not fit fully in the outlet, reverse the

plug. If it still does not fit, contact a qualified

electrician. DO NOT attempt to defeat this

safety feature.

11. Warning – This heater draws 12.5 amps

during operation. To prevent overloading a

circuit, DO NOT plug the heater into a circuit

that already has other appliances working.

12. Warning – It is normal for the plug to feel

warm to the touch; however, a loose fit

between the AC outlet (receptacle) and plug

may cause overheating and distortion of the

plug. Contact a qualified electrician to replace

loose or worn outlet.

13. Warning – To disconnect the heater, first turn

off the product, then grip the plug body and

pull it from the wall outlet. DO NOT pull by the

cord.

14. Warning – DO NOT insert or allow foreign

objects to enter any ventilation or exhaust

opening as this may cause electric shock,

fire, or damage to the heater.

15. Warning – To prevent a possible fire, DO NOT

block air intakes or exhaust in any manner.

DO NOT use on soft surfaces, like a bed, or

where openings may become blocked.

16. Warning – A heater has hot and arcing or

sparking parts inside. DO NOT use it in areas

where gasoline, paint or flammable liquids are

used or stored.

17. Warning – Use this heater only as described in

this manual. Any other use not recommended

by the manufacturer may cause fire, electric

shock, or injury to persons.

18. Warning – ALWAYS plug heater directly into

a wall outlet/receptacle. DO NOT use with an

extension cord or relocatable power tap

(outlet/power strip).

19. Warning – NEVER tamper with this product

or attempt to fix it. Any tampering with, or

modification of this product can result in

serious injury, death, or fire. DO NOT open.

Risk of electric shock. There are no user

serviceable parts inside.

20. Warning – DO NOT remove product labels

that contain warnings or safety instruction.

21. Caution – The output of this heater may vary

and its temperature may become intense

enough to burn exposed skin. Use of this

heater is not recommended for persons with

reduced sensitivity to heat or an inability to

react to avoid burns.

22. Caution – Before cleaning, or storage, or when

not in use, turn the product’s controls to the

OFF position and unplug the heater from the

electrical outlet and allow to cool.

23. Caution – Place the heater on a firm, level,

open surface free from obstructions and at

least 3 feet (0.9 m) away from any combustible

materials. DO NOT use on an unstable surface

such as bedding or deep carpeting. Be sure

the heater is not in a position where it may be

tripped over by small children or pets.

24. Caution – If your home has aluminum

wiring have a licensed electrician check your

receptacle’s connections. When using a 1500

watt heater, aluminum wire connections can

cause a safety issue.

25. SAVE THESE

INSTRUCTIONS

• Ceramic heaters generate heat by passing electricity through heating wires embedded in ceramic plates.

• In the Honeywell Ceramic Tower Heater, air is drawn into the back of the heater by a fan, through the ceramic element and out

the front of the heater to gently introduce warm air into the room.

• This type of heating technology provides consistent, even heating.

• For best results, place heater on the oor and allow heater to run for 5-10 minutes to reach maximum heat output.

SET UP

MOVING THE HEATER

• The Honeywell Ceramic Tower Heater requires no assembly. Simply unpack heater and save all packaging materials for o-

season storage.

• Place the heater on a rm, level, open surface free from obstructions and at least 3 feet (0.9m) away from any wall or

combustible material.

• DO NOT use on an unstable surface such as bedding or deep carpeting.

• BE SURE THE HEATER IS NOT IN A POSITION WHERE IT MAY BE TRIPPED OVER BY CHILDREN OR PETS.

• This heater is equipped with a Cool Touch handle for your convenience.

• Turn o the heater.

• Allow it to cool for ten minutes.

• Unplug heater and move.

OPERATION

• NOTE: NEVER LEAVE AN OPERATING UNIT UNATTENDED

• With heater in the OFF position ( ), plug the heater into

a polarized 120V outlet. DO NOT FORCE THE POLARIZED

PLUG INTO THE OUTLET; it will only t one way.

• With 80° oscillation, the Honeywell Ceramic Tower Heater

is versatile and designed to be placed in the center of the

room or closer to the wall (at least 3 feet way) for maximum

convection room heating.

• Turn heater on by pressing the Power Button ( ).The Power

Indicator will illuminate and the heater will start in the

Constant On HI Level Setting ( ).

• The heater has two operational modes – continuous heating

or heating with a thermostat setting where the heater cycles

on and o according to the selected temperature setting.

• To set a Continuous Heat Setting, press ( ): - Choose Low ( ) to use 900 watts of power (750 watts on the HCE317 Series only)

- Choose High ( ) to use 1500 watts of power

NOTE: Because the Low setting does not require as much electricity to operate, it is more energy ecient and may be a better

option if you are concerned about saving energy.

• In the continuous heat mode, make sure to manually turn the heater OFF when done using this appliance.

• To set the Thermostat, press the Thermostat Control Buttons ( ) and choose your Desired Temperature. The Desired

Temperature will ash ve times and then the Current Temperature in the room will display as a steady red. On the HCE305/HCE309

unit models only, there are 4 pre-set comfort settings from which to choose: 65°, 70°, 75°, 80°. These are your desired

room temperature settings.

NOTE: If the Current Temperature is higher than your Desired Temperature, the heater will be o until the room temperature falls

below this setting or until the Desired Temperature is changed.

• Press the Timer Button ( ) to select 1, 2, 4, or 8 hour setting. The heater will run for that chosen period in the selected mode,

counting down the hours and automatically shutting the heater o after the selected time has passed.

• If unit has an oscillation feature, press the Oscillate Button ( ) to turn on or o the oscillation function.

• To shut the heater o, press the Power Button ( ) and the heater will begin Powering Down. The heater will shut o after counting

down 6 seconds in the Temperature Display to cool down the internal components.

• It is important to allow the heater to run through the cool down phase. DO NOT unplug the heater until it has completed the cool

down cycle.

Oscillate Button

Fig. 1

Power

Button

Timer

Thermostat

Control Buttons

Current Temperature/

Desired Temperature Display

Heat Level Settings

Power

Indicator

Note: Controls/features will vary slightly by model

Especificaciones del producto

Marca:	Honeywell
Categoría:	cocina
Modelo:	HCE351
Color del producto:	Silver, White
Instrucciones:	Ja
Tecnología de conectividad:	Bedraad
Tipo de fuente de energía:	USB
Número de teclas, teclado:	105
Destinado a:	Universeel
Conexión:	USB
Teclado numérico:	Ja
Incluye ratón:	Nee
Teclas de Windows:	Ja
Teclado de tamaño completo:	Ja
Color de superficie:	Monochromatisch
Soporte de la muñeca:	Nee
Tamaño del teclado:	Volledige grootte (100%)
Teclado de estilo:	Recht
Dimensiones del teclado (AnxPrxAl):	441 x 124 x 10 mm