Hooker 1618-75007-DKW Manual de Usario

Hooker Mesa 1618-75007-DKW

Lee a continuación 📖 el manual en español para Hooker 1618-75007-DKW (3 páginas) en la categoría Mesa. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/3
ASSEMBLY INSTRUCTION
Item#: 75007 1618- - DKW Trestle Dining Table Base
1618 75- 008- DKW Trestle Dining Table Top
** Please make sure you have all prior to assembly.parts indicated below
Assembly Steps
1. Put table top (M) upside
down on a soft place to
prevent it from being
scratched.
2. center Attach leg (N) to table
top (M) as labeled by using
bolt (E), lock washer (C) and
flat washer (D). Tighten them
securely with allen wrench
(A). (See diagram 1)
3. Attach base leg (O) to table
top (M)by using bolt (B), lock
washer (C) and flat washer
(D). Tighten them securely
with allen wrench (A). (See
diagram 2)
Diagram1
Diagram2
M
4. nsert the I stretcher
P
into
center hole of table base leg
(O) fix it by using bolt (B), lock
washer (C) and flat washer
(D). Tighten them securely
with allen wrench (A). (See
diagram 3)
5. Repeat step 4 to install
another side stretcher(p) into
table legs. Tighten them on
stretcher(P) left side securely
with threaded rod(F),lock
washer(K),flat washer(L) and
rubber gasket(J).Securely
them on the stretcher (P) right
side with leveler wrench (H),
nut ( washer (I), flat L) and
rubber gasket (J). Securely
them on center leg with
leveler wrench (H),bolt
(G) ,lock washer(K),flat
washer(L) and rubber gasket
( )J . (See diagram 4)
6. Turn the table top upright. If
you want to place the leaf on
the table, please turn the
switch to “ off position
underneath top panel. Then
pull out two ends of top panel,
place it on top and push them
together, turn the switch to
ON position.
(See iagram d 5&6).
7. When you adjust the table
top, please be sure to
unstrengthen bolt (G) on
center leg first.
Di
Diagram5&6
O
Instruction for table leaves:
1. There are latches at the bottom of table top, turn on the latch ,pull out table top as the arrow direction
shown in diagram 7.
2. Place table leaves (Q) between and push table tops together. Turn off latches. thePut server (R)on
table top(see diagram 8)
3. Take opposite actions to remove table leaves.
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.
Diagram7
Diagram8
Q
R

Especificaciones del producto

Marca: Hooker
Categoría: Mesa
Modelo: 1618-75007-DKW

¿Necesitas ayuda?

Si necesitas ayuda con Hooker 1618-75007-DKW haz una pregunta a continuación y otros usuarios te responderán