Hooker 366-75-218 Manual de Usario

Hooker Tafel 366-75-218

Lee a continuación 📖 el manual en español para Hooker 366-75-218 (1 páginas) en la categoría Tafel. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
ASSEMBLY INSTRUCTION
Item#: 366-75-218 ROUND TOP LEAF PED TABLE W/2-10” LEAVES
** Please make sure you have all parts indicated below prior to assembly.
Diagram 1 Diagram 2 Diagram 3
Assembly Steps:
1. Align locator dowels at the table post top to the holes in the mending bridge panel, attach them
using 2 bolts(E), 2 lock washers(B), 2 flat washers(A), by turning with allen wrench(D) in a
clockwise direction. (see diagram 1).
2. Align locator dowels at the bottom of table post to holes in base, attach them using 2 bolts(E), 2
lock washers(B), 2 flat washers(A), by turning with allen wrench(D) in a clockwise direction.
(see diagram 2).
3. Put table top upside down on a soft surface to prevent from scratching top, attach the
assembled base to top using 4 bolts(E), 4 lock washers(B), 4 flat washers(A), by turning with
allen wrench(D) in a clockwise direction. (see diagram 3).
4. Turn table upright, lift up the drop down leaf on each side and pull out the support lid under it
for supporting.
Caution: Do not over tighten.
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.

Especificaciones del producto

Marca: Hooker
Categoría: Tafel
Modelo: 366-75-218

¿Necesitas ayuda?

Si necesitas ayuda con Hooker 366-75-218 haz una pregunta a continuación y otros usuarios te responderán