Hooker 5751-75200T-95 Manual de Usario
Lee a continuación 📖 el manual en español para Hooker 5751-75200T-95 (3 páginas) en la categoría Mesa. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/3
ASSEMBLY INSTRUCTION
Item#:5751-75200T- 84in Rectangular Dining Table Top w-2/22in 95
-75200B- Rectangular Dining Table Base 5751 95
** Please make sure you have all parts indicated below prior to assembly.
This table is heavy and can best be assembled with the help of two or more people.
Diagram 1 Diagram 2 Diagram 3
Note:
1. Height of this table can be adjusted with or without extension block. (30” and 36” heights)
1/3
2/3
Assembly steps with extension blocks:
1. Well place 2pcs of top stretchers between side frames (H), ing bolts (F), lock washers (Cus )
and flat washers (D), don t tighten up at this step. (See Diagram 1).Then place bottom ’
stretcher between pedestals (H), ing bolts (G), lock washers (C) and flat washers (D), us
secure all by turning with allen wrench (A) in clockwise direction. (See Diagram 1).
2. Attach the extension blocks(L) to the side frames.Then attach the base rails (O) to the side
frames extension blocks by using bolts (E), lock washers (C) and flat washers (D), with
tighten all with allen wrench (A). (See Diagram 2)
3. Place table top (P) upside down on a soft surface to prevent it from being scratched.
Put whole base onto top to make sure all pre-drilled holes are in alignment, well insert
bolts (F lock washers (C) and flat washers (D), tighten bolts by turning with allen ),
wrench (A) in clockwise direction. (See Diagram 3)
Assembly steps without extension blocks:
Diagram 4 Diagram 5 Diagram 6
4.Unscrew bolts (E), lock washers (C) and flat washers (D) from base rails (O (See Diagram 4).)
5.Remove the extension blocks (L) from the side frame .
6. Attach base rails(O) to the side frame by using bolts (B), lock washers (C) and flat washers (D),
tighten all with allen wrench (A). (See Diagram 5)
7. ng scratched. Place table top (P) upside down on a soft surface to prevent it from bei
Put whole base onto top to make sure all pre-drilled holes are in alignment, well insert
bolts (F), lock washers (C) and flat washers (D), tighten bolts by turning with allen wrench
(A) in clockwise direction. (See Diagram 6)
8. Turn table upright.
Instruction for table leaves:
1. There are latches at the bottom of table top, turn o the latches as shown in Diagram 7. ff
2. Pull out table top as the arrow direction shown in Diagram 8.
3. Place table leaves between and push table tops together.
4. Turn on latches. (see Diagram 7)
5.Take opposite actions to remove table leaves.
Diagram 7 Diagram 8
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.
3/3
Especificaciones del producto
| Marca: | Hooker |
| Categoría: | Mesa |
| Modelo: | 5751-75200T-95 |
¿Necesitas ayuda?
Si necesitas ayuda con Hooker 5751-75200T-95 haz una pregunta a continuación y otros usuarios te responderán
Mesa Hooker Manuales
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
10 Septiembre 2024
Mesa Manuales
- Mesa IKEA
- Mesa Allibert
- Mesa Bartscher
- Mesa Jysk
- Mesa Tristar
- Mesa BDI
- Mesa Paidi
- Mesa Livarno
- Mesa Mio
- Mesa Genesis
- Mesa Habitat
- Mesa Little Tikes
- Mesa Interstuhl
- Mesa Butler
- Mesa Cougar
- Mesa Iceberg
- Mesa Four Hands
- Mesa Special-T
- Mesa Step2
- Mesa Bretford
- Mesa Home Trends & Design
- Mesa Glorious
- Mesa Cool Head
- Mesa Triumph Sports
- Mesa Crelando
- Mesa Bbf
- Mesa Mount-It!
- Mesa Early Settler
- Mesa MooreCo
- Mesa Yamazen
Últimos Mesa Manuales
23 Octubre 2024
23 Octubre 2024
23 Octubre 2024
23 Octubre 2024
23 Octubre 2024
23 Octubre 2024
23 Octubre 2024
23 Octubre 2024
23 Octubre 2024
23 Octubre 2024