Ideal Networks LanTEK III Manual de Usario
Ideal Networks
Instrumentos de medida
LanTEK III
Lee a continuación 📖 el manual en español para Ideal Networks LanTEK III (110 páginas) en la categoría Instrumentos de medida. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/110
0
LanTEK® II Series Manual
1
LanTEK®II Cable Certifier Instruction Manual
This instruction manual contains information proprietary to IDEAL INDUSTRIES, INC. The
information in this document is not to be used or duplicated in any manner without prior
written approval from IDEAL INDUSTRIES, INC.
IDEAL INDUSTRIES, INC. and the IDEAL INDUSTRIES, INC. logo are registered trademarks of
IDEAL INDUSTRIES, INC.
All other product names mentioned in this manual are trademarked or copyrighted by their
respective manufacturers.
IDEAL INDUSTRIES, INC.
9650 Chesapeake Drive
San Diego, CA 92123
Phone: (800) 854-2708
Phone: (858) 627-0100
Fax: (858) 715-7003
Manual Part No.: P-2877 Rev. 1
© 2009 IDEAL INDUSTRIES, INC. 2009-07
2
Standard Warranty Policy of IDEAL INDUSTRIES, INC.
The General Terms and Conditions of the local subsidiary of IDEAL INDUSTRIES, INC. apply.
Safety Precautions
Exercise caution when handling rechargeable batteries (accumulators)
All lithium-ion battery packs (Li-ion), regardless of their indicated charge state, are capable of
producing electrical current sufficient to cause personal injury and/or property damage.
Do not dispose of lithium-ion battery packs (Li-ion) in a fire or with regular waste. Lithium-
ion battery packs (Li-ion) may explode if exposed to open flame. The battery packs are
hazardous waste and may contaminate ground water sources if disposed of in landfills.
IDEAL INDUSTRIES, INC. tries to provide the maximum protection possible by installing an
automatic reset fuse in the battery packs, to help stop high current discharge as quickly as
possible. However, these fuses may not completely protect against a momentary arc
discharge, which can result if the battery pack's electrical contacts are shorted. The following
battery pack handling precautions must be closely followed to avoid risk of injury.
When a battery pack is not installed in the Display (DH) or Remote (RH) handset, it
should be kept in a clean, dry, non-conductive package.
Keep conductive materials away from the battery pack at all times.
Keep contact sides of the battery pack away from each other at all times.
Battery packs can be charged while in the Display (DH) and in the Remote (RH) handset,
but also externally with the adapter. Charging in any other manner may cause the battery
pack to explode.
Always install, remove, store, and charge the battery packs in a non-explosive
atmosphere.
Observe operating and storage temperatures (see chapter 1.3. Dimensions, Weights,
Operating Conditions).
Do not allow children or persons unfamiliar with the precautionary instructions in this
manual to handle or recharge the battery packs.
Do not open the battery pack case. There are no user-serviceable parts inside the case,
and the batteries in the case are not replaceable.
Especificaciones del producto
| Marca: | Ideal Networks |
| Categoría: | Instrumentos de medida |
| Modelo: | LanTEK III |
¿Necesitas ayuda?
Si necesitas ayuda con Ideal Networks LanTEK III haz una pregunta a continuación y otros usuarios te responderán
Instrumentos de medida Ideal Networks Manuales
7 Septiembre 2024
7 Septiembre 2024
7 Septiembre 2024
7 Septiembre 2024
7 Septiembre 2024
7 Septiembre 2024
7 Septiembre 2024
7 Septiembre 2024
7 Septiembre 2024
7 Septiembre 2024
Instrumentos de medida Manuales
- Instrumentos de medida Stanley
- Instrumentos de medida Benning
- Instrumentos de medida Voltcraft
- Instrumentos de medida Ferrex
- Instrumentos de medida Perel
- Instrumentos de medida AS - Schwabe
- Instrumentos de medida Bresser
- Instrumentos de medida Powerfix
- Instrumentos de medida Hema
- Instrumentos de medida Fluke
- Instrumentos de medida Defort
- Instrumentos de medida Max
- Instrumentos de medida Laserliner
- Instrumentos de medida Metrel
- Instrumentos de medida Brandson
- Instrumentos de medida Beha-Amprobe
- Instrumentos de medida Sonel
- Instrumentos de medida Myoton
- Instrumentos de medida Megger
- Instrumentos de medida Gossen Metrawatt
- Instrumentos de medida Hameg
- Instrumentos de medida GMC Instruments
- Instrumentos de medida Scubapro
- Instrumentos de medida Nieaf-Smitt
- Instrumentos de medida Psiber
- Instrumentos de medida Uni-Trend
Últimos Instrumentos de medida Manuales
27 Octubre 2024
17 Septiembre 2024
17 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024