IOGEAR GWHD2DKIT Manual de Usario

IOGEAR extensor AV GWHD2DKIT

Lee a continuación 📖 el manual en español para IOGEAR GWHD2DKIT (16 páginas) en la categoría extensor AV. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/16
Share ProTM Mini Transmisor de Video HD Inalámbrico
y Kit de Receptor
Guía de configuración rápide
Share ProTM Mini Kit Émetteur et Récepteur Vidéo HD
Sans Fil
Guide de démarrage rapide
Share ProTM Mini Wireless HD Video Transmitter
and Receiver Kit
Quick Start Guide
www.iogear.com
GWHD2DKIT
PART NO. Q1584-b
1
1 x Mini wireless transmitter
1 x Mini wireless receiver
2 x HDMI cable extender
1 x 90° HDMI adapter
2 x USB-A male-to-USB micro power cables
1 x Quick Start Guide
1 x Warranty Card
Package Contents
• 1 HDMI source device (DVD, PS3, Satellite box, PC etc.) with USB-A connector
that carries power (and not used as a firmware upgrade port)
• 1 HDMI display device (HDTV, projector with HDMI port, etc.) with USB-A
connector that carries power (and not used as a firmware upgrade port)
Note: In the case that there is no USB-A port that supplies power, please use a 5V
USB power adapter with a minimum of 500mA output (not included in the package).
System Requirements
Transmitter
A. HDMI output male connector
B. Wireless signal indicator (Red LED)
C. Power input
D. Power indicator (Blue LED)
Receiver
E. HDMI input male connector
F. Wireless signal indicator (Red LED)
G. Power input
H. Power indicator (Blue LED)
Overview
A E
F G H
B C D
STEP 1
Turn on both the video source and the display (TV or projector). Make sure that
the input source on your display corresponds to the HDMI port that the transmitter
is connected to.
STEP 2
Insert the transmitter into the HDMI port of your video source device.
STEP 3
Use one of the USB charging cables to connect to the micro USB port of the
transmitter to a type USB-A port on the source device to obtain power. In a rare
case that the source device has no USB port, please use a 5V USB power adapter
with a minimum of 500mA output (not included in the package). At this time both
the power LED (blue) and the wireless LED (red) will light up solid and then the
wireless LED (red) will go out and come back on and both will remain solid.
In case the space around the HDMI port is too tight or the position is too awkward
and could cause a connection issue, use the HDMI cable extender or the 90
degree HDMI adapter included in the package to correct this issue or to increase
the spacing.
2
Hardware Installation
2Transmitter
3
Transmitter

Especificaciones del producto

Marca: IOGEAR
Categoría: extensor AV
Modelo: GWHD2DKIT

¿Necesitas ayuda?

Si necesitas ayuda con IOGEAR GWHD2DKIT haz una pregunta a continuación y otros usuarios te responderán




extensor AV IOGEAR Manuales

extensor AV Manuales

Últimos extensor AV Manuales