JDC Skywatch Log Manual de Usario

JDC Estación meteorológica Skywatch Log

Lee a continuación 📖 el manual en español para JDC Skywatch Log (6 páginas) en la categoría Estación meteorológica. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/6

- 1 -

 Thank you for purchasing the JDC SkywatchLog

interface for the SKYWATCH® GEOS N°11. This

system will connect your GEOS to your PC, enabling

you to download all stored data, view historical and

real-time data from your GEOS, and make calibration

adjustments to the instrument itself.

Items Included:

 SKYWATCHLOG CD-ROM

 Cable Adapter (Either USB or RS232 Port

connector)

 Velcro strap

Required:

 GEOS N°11 instrument

 PC with USB or RS232 port

 Windows 98 or higher

INSTALLATION INSTRUCTIONS

1. INSTALL SKYWATCHLOG PROGRAM

** **DO NOT CONNECT THE ADAPTER TO THE PC YET

 Insert the SKYWATCHLOG CD-ROM

 If the setup does not start automatically, select

“My Computer” and double-click on the CD drive to

start the setup.

 “Copying Files, please wait” is displayed. The

Setup program is copying les to a temporary

folder for use during installation.

 The Welcome screen is displayed; click “OK” to

continue the setup process.

 “SkywatchLog Setup” window is displayed. The

default location for the program and data is

displayed as “C: SkywatchLog”. \ProgramFiles\

Change this directory if you wish, then click the

setup button.

 The setup will include the SkywatchLog into a

program group (on the “Start” menu of your PC) for

quick access to the program.

 Install is running…

 The setup will create the program icons and install

the program. Select “OK” when complete.

 The installation of the SkywatchLog program is

now complete; you must next setup the

USB/RS232 port hardware.

2. INSTALL THE USB OR RS232 CONVERTER

** INSERT THE CABLE ADAPTER INTO DESIRED

PORT, DO NOT CONNECT THE GEOS **

- 2 -

If you have a RS232 CONVERTER, you can

directly go to the point 3.

 Launch program « that is in: CDM_Setup.exe »

« Your CD driver:\Drivers_USB\Win_XP_2000\ ».

 You might be asked to confirm the program execution.

Confirm it by clicking on “ ”. Run

 The Driver software will be installed. Click “OK".

 When you plug your USB connection, a window

«Installation Assistant for new hardware detected»

might be displayed.

 Click on «No, not for this time », and on «next». Please

note that depending on your Windows set up, this

window may not appear.

 Window «Installation Assistant for new hardware

detected» is displayed.

 Wizard“Found New Hardware ” screen will appear.

Select “Install from a list or specific location” and select

NEXT.

A) Select «Sear for the best driver in these locations». ch

B) Select «Include this location in the search».

C) Click on «Search».

 Once in «Select a folder», look for the driver

folders that are on the SkywatchLog CD and select

the one corresponding to your Windows system.

Click on «OK», and on «Next».

 Install is in progress.

 Installation is now completed. You have just

installed the USB Converter. Click on «Finish».

- 3 -

3. Install USB Serial Port (COM)

 Now you need to install the USB Serial Port (COM).

Proceed the same way than for the USB Converter

that you have just installed. Window «Installation

Assistant for new hardware detected» is displayed.

Click on «No, not this time », and on «next». Please

note that depending on your Windows set up, this

window may not appear.

 “Found New Hardware” screen will appear. Select

“Install from a list or specific location” and select

NEXT.

A) Select «Sear for the best pilot in these locations».

B) Select «Include this location in the search».

C) Click on «Search».

 Once in «Select a folder», look for the drivers that

are on the SkywatchLog CD and select the ones

corresponding to your Windows system. Click on

«OK», and on «Next».

 Install is in progress.

 Installation is now completed. Click on «Finish».

PROGRAM INSTRUCTIONS

You can now run the SkywatchLog software.

(Default location is START - ALL PROGRAMS -> >

SKYWATCHLOG)

1. CONNECT THE GEOS N°11 TO THE PC

 The PC adapter has the USB or RS232 connector on

one end, and a square at disc on the other. The disc

is what captures the data from the GEOS, with no plug.

 To connect, rst turn on the GEOS

Especificaciones del producto

Marca:	JDC
Categoría:	Estación meteorológica
Modelo:	Skywatch Log

¿Necesitas ayuda?

Si necesitas ayuda con JDC Skywatch Log haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

Estación meteorológica JDC Manuales

JDC GEOS Manual de Usario

29 Agosto 2024

JDC Skywatch GEOS No 11 Manual de Usario

29 Agosto 2024

JDC Skywatch Log Manual de Usario

28 Agosto 2024

Estación meteorológica Manuales

Últimos Estación meteorológica Manuales

Ascot GT-WS-07s Manual de Usario

20 Octubre 2024

Ventus K0382 Manual de Usario

18 Octubre 2024

Hyundai WSP 3080 Manual de Usario

15 Octubre 2024

La Crosse Technology V61 Manual de Usario

8 Octubre 2024

Cresta WX580M Manual de Usario

6 Octubre 2024

Sencor SWS 65 Manual de Usario

5 Octubre 2024

Irox JKR-1 Manual de Usario

5 Octubre 2024

TFA 30.5002 Manual de Usario

5 Octubre 2024

TFA WeatherHub 30.3306.02 Manual de Usario

4 Octubre 2024

Jung WS10R Manual de Usario

4 Octubre 2024