Jilong JL007113NPF Manual de Usario

Jilong Piscina elevada JL007113NPF

Lee a continuación 📖 el manual en español para Jilong JL007113NPF (16 páginas) en la categoría Piscina elevada. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/16
1
Thank you for choosing the products manufactured by Jilong Company. Before using, please
read the manual carefully and keep it with original package for future reference.
Definition
Warning No protection against drowning Design working pressure
Mandatory instruction Swimmers only Read instructions first
Max. load capacity Fully inflate all air chambers Always supervise children in water
Device provides floating stability Device requires balancing Pool use only
Numbers of users adults/children Safe distance to shore m : ...
Prohibition Not for children ...years of age and below
Do not use in oshore current Do not use in offshore wind
Do not use in white water Do not use in braking waves
See Table
Item No.
JL007113N/JL007113NPF
0.03
45kg
10m
Item No.
JL007113N/JL007113NPF
0
1
0-6
SAFETY ADVICES:
1. Designate a person to be in charge of safety.
2. More supervision efforts are required when there are several persons inside the product.
3. If possible, teach your child to swim.
User’s Manual
2
4. Wet the neck, arms and legs before child enter the water.
5. Prohibit running or active games on product edges.
6. The children not good at swimming or unattended must wear life vest.
7. Never put toys nearby and upside the unattended product.
8. Read the manual and follow the instructions relating to safety tips, correct and complete product.
9. For your own safety, always heed the advice and warnings in these instructions.
10. Teach the child the self-rescue action s.
11. Non-compliance with these operating instructions may expose you to serious danger. Only use the product in the
places and conditions for which it is intended.
12. Not suitable for non-swimmers! Do not use if an offshore wind is blowing Do not use in areas subject to !
currents Does not protect against drowning! Do not swim under the frame Do not jump unless the area is clear Do ! ! !
not use in breaking waves Do not leave the air tube deflated Supervise children at all times. ! !
13. When accident occurs: Pull the child out of water as early as possible. Change the wet clothes and cover the
child with warm blanket. Ask for help and act awording to the method told to you.
14. Remember first-aid number and post it near the product.
15. Distribute the weight of load and accessories evenly so that the product use level fore to aft and side to side.
,!WARNING! Keep away from fire. Do not use around sharp objects. Do not dive or jump.
USING INSTRUCTION:
1. Choose a flat ground make sure there are no stone, gravel, glass, and any other sharp and edgy objects.
2. Take out the product from package and check if any parts missing, unfold it on the ground, lay flat, locate and
open inflation valve(s).
3. It is recommended that you use only a hand or foot pump for inflation.
Caution:Do not use the high-pressure air to inflate! Do not over-inflate!Never image to inflate the products
with mouth, as it will be so much difficult.
4. Slowly Inflate all parts and accessories until full one by one. Close and press all valves tightly after inflation to
firm and supportive.
CAUTION: It needs one adult to set up the product and it will let you quickly use the product within 10 minutes.
NOTE: When using this product, ensure that the valves are accessible to the user and remain out of the water.
5. After use, open and squeeze valves to release air, or insert a slim object such as a deflation tube to hold valve
inner stopper open. Being careful not to puncture your product or force air out of product. Allow air to escape
slowly and naturally.
STORAGE AND MAINTENANCE
Clean the product with clear water, then leave it in shady and cool place for airing, fold it into original package and
place it indoor for next use.
3
Pay attention to the fact that no sharp edges are shaped in the plastic foil while folding up the item. In winner, the
pool is not allowed to be placed at a temperature that is below 5 °C, otherwise the plastic film would be damaged.
Caution: Do not use the alkali or acid detergent to clean product! Do not leave product exposed under
sunlight directly because it will shorten the using-life of product.
WARNING: N complince of the maintenance rules may result in serious hazards for health and especially on
for the children.
Repair Patch Instructions
(Small pinhole and small puncture leaks can be repaired with the included repair patch)
a) Locate the leak place.
b) Deflate the air.
c) Clean the area surrounding the leakage and wipe up all water from the surface.
d) Take out the repair patch, cut it in required shape and size, which should be litter larger than the leaking area, to
put the patch on leaking area and press firmly.
e) You can use it again after 24 hours drying of the repaired position.
If the damage is bigger than 1 (2.5cm), we recommend using a Silicone or rubber based glue for repair.
Please read warning statement on glue prior to use.
Shanghai Jilong Plastic Products Co. Ltd.
No. 460 Lanxue Road, Huanglou, Pudong Area, Shanghai, 201205, P.R. China
Tel: +86- - -mail: 21 58942200 E info@jilong.com Web: www.jilong.com
After Sales Service For EU Countries (Except Germany/Austria/Switzerland):
Jilong Europe Srl unipersonale
Via Vitaliano Brancati, 44-00144 Roma - Italia E-mail: service@jilong-europe.com
After Sales Service for North America (Canada, USA, Mexico):
Jilong Plastic Products North America Inc.
105, West 2nd Avenue, Vancouver B.C. V5Y 1B8 Canada E-mail: service@jilong.com

Especificaciones del producto

Marca: Jilong
Categoría: Piscina elevada
Modelo: JL007113NPF

¿Necesitas ayuda?

Si necesitas ayuda con Jilong JL007113NPF haz una pregunta a continuación y otros usuarios te responderán