Juki S161 Manual de Usario
Juki
máquina de coser
S161
Lee a continuación 📖 el manual en español para Juki S161 (4 páginas) en la categoría máquina de coser. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/4
– 1 –
INSTRUCTION MANUAL
Swing-type gathering device
S159・S160
S161・S162
No.03
29114915
1. Name
Swing-type gathering device for the MO-3000, MO-6000 series of overlock/safety stitch machine
S159 : Swing-type gathering device for safety stitch machines (pedal-operated)
S160 : Swing-type gathering device for safety stitch machines (lever-operated)
S161 : Swing-type gathering device for overlock machines (pedal-operated)
S162 : Swing-type gathering device for overlock machines (lever-operated)
2. Applicable models
MO-3 △04E-0E6 MO-3 △04E-0F6 MO-6 △14-BE6
MO-3 △12E-DF6 MO-3 △14E-BE6 MO-6 △16-DE4
MO-3 △14E-BD6 MO-3 △16E-DE4 MO-6 △16-FF6
MO-3 △14E-BF6 MO-3 △16E-FF6
MO-3 △16E-DD4 MO-3 △43E-FBD6
MO-3 △16E-DF6 MO-3 △16E-RH6
3. Specications
4.
Parts to be replaced when the gathering device is used with the overlock/safety stitch machine
To operate an overlock/safety stitch machine in combination with the S159, S160, S161 or S162 gathering device, the gauge
components need to be changed accordingly. Choose the appropriate parts from among those listed in the table below.
(1) Safety stitch machines (MO-3 △16E, 3 △43E, 6 △16) S159 or 161
Read safety instructions carefully and understand them before using.
Retain this Instruction Manual for future reference.
CAUTION :
This Instruction Manual is intended for the S159/S160/S161/S162. Read and fully understand the
instructions given under “IMPORTANT SAFETY INSTRUCTIONS” in the Instruction Manual the MO-
3000, MO-6000 series before putting the machine into service when this device is installed to the
MO-3000, MO-6000 series.
In addition, to emphasize the S159/S160/S161/S162, some illustrations of the MO-3000, MO-6000
seriesaresimplied.Also,illustrationsofthesafetydevicesarepartiallyomitted.
＊ Use the gathering foot onry when the RH6 gauge set is used.
Application For continuous gathering and partial shirring on light-weight materials including
knnitted fabric, light-weight knits and broadcloth.
Sewing speed Up to 7000 rpm
Differential feed ratio Overlock machines 1 : 3 Safety stitch machines 1 : 3
(Adjust appropriately in accordance with the type of material to be used.)
Lift of the presser foot Overlock machine : 6 mm Safety stitch machine : 6 mm
(5 mm only for RH6)
Gauge size
DD4 DE4 DF6 FF6 RH6 FBD6
Name
Presser joint 12154654 12154654 12154753 12154852 12154951 11975950
Main feed dog 12170700 12170700 12170809 12170908 12170908 11884806
Differential feed dog 12172904 12172904 12173407 12173407 12173407 11885902
Throat plate R4508J0DD0B R4508J6ED0B R4608J0FD0A R4612J6FD0A R4617J0HD0A R4612J0DE02
＊Gathering foot ーーーー
＊MAS0510800A
ー
– 2 –
WARNING :
So as to prevent accidents caused by abrupt start of the machine, start the job after turning OFF
thepowertothemachineandconrmingthatthesewingmachinewillnotrunevenbydepressing
the start pedal.
(2) Overlock machines (MO-3 △04E, 3 △14E, 6 △14) S160 or 162
5. Adjusting the gathering foot
Gathering foot
Section C Screw
Bracket A
B
D
E
F
(1) Adjust the gathering foot so that it comes in
parallel contact with the top surface of the
throat plate over the length.
a. Temporarily tighten screw A, loosen screw B, and
adjust the parallelism between the gathering foot and
the throat plate.
b. After the completion of sewing, tighten screw
B and
screw A.
(2) Adjusting the vertical position and the lateral
position of the gathering foot
a. Loosen two screws D and screw E in the thrust collar,
and adjust the position of the gathering foot, in the
lateral direction, so that it is 3 mm spaced from the
edge of the feed dog.
Gathering foot
Adjust the gathering foot by
pressing down section C.
Adjust the gathering foot by
pressing up section C.
Good
Not good
The gathering foot comes
in parallel contact with the
throat plate.
Gathering foot
Gathering foot
(2-row feed dog)(3-row feed dog)
3 mm 3 mm
Throat plate
Gauge size
0E6 0F6 BD6 BE6 BF6 DF6
Name
Presser joint 11878857 11974250 11879350 11879350 12153052 11974052
Main feed dog 11883402 11883402 11883402 11883402 11883402 11884608
Differential feed dog 12171807 12171807 12171807 12171807 12171807 12171906
Throat plate R4300J0EE0B R4300J0FE0A R4305J0DE0A R4305J6EE0A R4617J0HD0A R4308J0FE00
– 3 –
Gathering foot
A clearance of 1 to
2 mm is necessary.
F
D
Throat plate
6. Adjusting the lifting amount of the gathering foot (S159, S160)
a. Loosen screw G, and adjust the lifting amount of the
gathering foot by moving H up or down. The standard
lift of the gathering foot is 3 mm.
7. Modifying the table (fully-sunken type)
When using the S159 or S160 with a fully-sunken type
table, modify the dimensions of the table as indicated in
the gure on the left.
WARNING :
So as to prevent accidents caused by abrupt start of the machine, start the job after turning OFF
thepowertothemachineandconrmingthatthesewingmachinewillnotrunevenbydepressing
the start pedal.
(3) Adjusting the longitudinal position of the
gathering foot
As the standard longitudinal position of the gathering foot,
the gathering foot must reach the 2nd or 3rd tooth of the
differential feed dog of the overlock machine or the 1st
or 2nd tooth of the feed dog of the safety stitch machine
when the differential feed dog completes feeding action.
The size of gathers is changed by moving the gathering
foot back or forth. Adjust the longitudinal position of the
gathering foot in accordance with the material to be used.
(4) Adjusting the pressure of the gathering foot
a.
Standard pressure of the gathering foot, as measured
at the top end of the gathering foot, is 14.7 N. However,
adjust it properly in accordance with the material to be
used. (Adjust the pressure using adjusting knob
F
.)
Differential feed dogMain feed dog
Two or three teeth (overlock machine)
When the differential feed is maximized
with the feed pitch set to 2.2 mm
(mm)
95 52
70
1010
55
Throat plate
G
H
Presser foot
6 mm
3 mm
Especificaciones del producto
| Marca: | Juki |
| Categoría: | máquina de coser |
| Modelo: | S161 |
¿Necesitas ayuda?
Si necesitas ayuda con Juki S161 haz una pregunta a continuación y otros usuarios te responderán
máquina de coser Juki Manuales
21 Octubre 2024
21 Octubre 2024
18 Octubre 2024
14 Octubre 2024
5 Octubre 2024
1 Octubre 2024
27 Septiembre 2024
23 Septiembre 2024
18 Septiembre 2024
17 Septiembre 2024
máquina de coser Manuales
- máquina de coser AEG
- máquina de coser Ambiano
- máquina de coser Alfa
- máquina de coser Brother
- máquina de coser Sinbo
- máquina de coser Jata
- máquina de coser Emerio
- máquina de coser Singer
- máquina de coser Bernina
- máquina de coser Pfaff
- máquina de coser Elna
- máquina de coser Mellerware
- máquina de coser Termozeta
- máquina de coser Jocca
- máquina de coser Toyota
- máquina de coser Husqvarna
- máquina de coser Bernette
- máquina de coser Janome
- máquina de coser Necchi
- máquina de coser Yamato
- máquina de coser Durkopp Adler
- máquina de coser Kayser
- máquina de coser RCE
- máquina de coser Veritas
- máquina de coser Union Special
- máquina de coser Easy Home
- máquina de coser Vendomatic
- máquina de coser Baby Lock
- máquina de coser Empisal
- máquina de coser Lewenstein
- máquina de coser Meister Craft
- máquina de coser Yamata
- máquina de coser Weasy
- máquina de coser Victoria
- máquina de coser Prince
- máquina de coser Muller
- máquina de coser Sinojo
- máquina de coser Huskystar
- máquina de coser Gritzner
- máquina de coser W6
- máquina de coser Prixton
- máquina de coser Feiyue
- máquina de coser Husqvarna-Viking
- máquina de coser SteamMax
Últimos máquina de coser Manuales
27 Octubre 2024
27 Octubre 2024
26 Octubre 2024
26 Octubre 2024
26 Octubre 2024
21 Octubre 2024
21 Octubre 2024
20 Octubre 2024
20 Octubre 2024
19 Octubre 2024