Jung DWPMFBIRI Manual de Usario (19 Páginas)

Light management

Light managementLight management

Motion and presence detector

Motion and presence detectorMotion and presence detector

Art. no.: DWPMK360WW

Motion and presence detector

Motion and presence detectorMotion and presence detector

Art. no.: DWPMK360AL

Operating instructions

Operating instructionsOperating instructions

1

11 Safety instructions

Safety instructions

Safety instructionsSafety instructions

Electrical devices may only be mounted and connected by electrically skilled persons.

Electrical devices may only be mounted and connected by electrically skilled persons.Electrical devices may only be mounted and connected by electrically skilled persons.

Serious injuries, fire or property damage possible. Please read and follow manual fully.

Serious injuries, fire or property damage possible. Please read and follow manual fully.Serious injuries, fire or property damage possible. Please read and follow manual fully.

DANGER! Danger of electric shock. Device is not suitable for disconnection from supply

DANGER! Danger of electric shock. Device is not suitable for disconnection from supplyDANGER! Danger of electric shock. Device is not suitable for disconnection from supply

voltage. The load is not electrically isolated from the mains even when the device is switched

voltage. The load is not electrically isolated from the mains even when the device is switchedvoltage. The load is not electrically isolated from the mains even when the device is switched

off.

off.off.

Always disconnect before carrying out work on the devise or load. In so doing, take all the cir-

cuit breakers into account, which support dangerous voltages to the device and or load.

Do not press on the sensor window. Device can be damaged.

Do not press on the sensor window. Device can be damaged.Do not press on the sensor window. Device can be damaged.

The device is not suitable for use as a burglar alarm or other alarm.

The device is not suitable for use as a burglar alarm or other alarm.The device is not suitable for use as a burglar alarm or other alarm.

These instructions are an integral part of the product, and must remain with the end customer.

These instructions are an integral part of the product, and must remain with the end customer.These instructions are an integral part of the product, and must remain with the end customer.

2

22 Battery safety instructions

Battery safety instructions

Battery safety instructionsBattery safety instructions

This device or its accessories are supplied with batteries in the form of button cells.

DANGER! Batteries can be swallowed. This can lead directly to death by suffocation. Danger-

DANGER! Batteries can be swallowed. This can lead directly to death by suffocation. Danger-DANGER! Batteries can be swallowed. This can lead directly to death by suffocation. Danger-

ous substances may cause severe internal burns leading to death within 2 hours.

ous substances may cause severe internal burns leading to death within 2 hours.ous substances may cause severe internal burns leading to death within 2 hours.

Keep new and used batteries away from children.

Do not use devices if the battery compartment does not close securely and keep away from

children.

If you suspect that a battery has been swallowed or is in any orifice of the body, seek immediate

medical attention.

WARNING! Improper handling of batteries can result in explosion, fire or chemical burn due to

WARNING! Improper handling of batteries can result in explosion, fire or chemical burn due toWARNING! Improper handling of batteries can result in explosion, fire or chemical burn due to

leakage.

leakage.leakage.

Do not heat or throw batteries into fire.

Do not reverse polarity, short-circuit or recharge batteries.

Do not deform or disassemble batteries.

Replace batteries only with an identical or equivalent type.

Remove empty batteries immediately and dispose of in an environmentally friendly manner.

1 / 19

82593223 27.06.2019

J0082593223

Light management

Light managementLight management

Motion and presence detector

3

33 Device components

Device components

Device componentsDevice components

Figure1

(1) Connection box

(2) Sensor top

(3) Brightness sensor

(4) Sensor window with red and blue display LED

(5) Decor ring

(6) Push-on cover

Figure2

(7) IR end customer remote control, included in the scope of delivery

(8) IR installation engineer remote control (see Accessories)

4

44 Intended use

Intended use

Intended useIntended use

– Automatic switching of lighting depending on the heat motion and ambient brightness

– Indoor ceiling mounting, surface-mounted

Product characteristics

Product characteristicsProduct characteristics

– 2-point light control

– Functions settable with IR remote controls

2 / 19

82593223 27.06.2019

J0082593223

Light management

Light managementLight management

Motion and presence detector

– Restriction of the detection field by switching off individual sensors or push-on cover

– Operation with IR remote control, 2-wire extension or installation button

– Teach function for adjustment of the brightness threshold, in combination with IR remote

controls

– Switch-off warning

– Short-time operation, e.g. to activate acoustic signal encoders

– Display LEDs

– Presence simulation

– Function as twilight switch

– Dynamic run-on time

– Extension of the detection field through parallel switching of multiple devices

The extension of the detection area with 3-wire extensions is not possible.

Automatic operation

Automatic operationAutomatic operation

The device detects heat motions of people, animals and objects.

– The light is switched on if a person enters the detection field and the brightness threshold

is below the set brightness threshold.

The run-on time restarts with each detected motion.

– The light is switched off when it is no longer required because:

no more movement is detected in the detection field and the run-on time has elapsed or

the ambient light is bright enough.

The switch-off brightness is calculated from the set brightness threshold and the connec-

ted light.

To avoid brief shading from causing switch-off, switch-off only takes place when the set

run-on time has elapsed. The run-on time does not restart on movement detection for as

long as the switch-off brightness is exceeded.

The minimum switch-off brightness is 100 lux, even if a lower value is set.

To avoid any switch-on caused by a cooling illuminant, no movement signals are evaluated for a

brief lockout time after switching off. The motion detector adjusts itself to the ambient conditions

to keep the time as short as possible.

Short time operation

Short time operationShort time operation

If motion occurs, then a short pulse of approx. 0.5 seconds is triggered depending on the bright-

ness. The pulse is cyclically repeated as long as motions are detected.

Switch-off warning

Switch-off warningSwitch-off warning

If the switch-off warning is active, the light is not switched off immediately after the run-on time

has elapsed. Triple flashing at an interval of 10 seconds shows that the light will be switched off

soon. The run-on time is thereby prolonged by approx. 30 seconds. If movement is detected

during the switch-off prewarning, then the run-on time is restarted and the light remains on.

Dynamic run-on time

Dynamic run-on timeDynamic run-on time

The function determines a run-on time within specified limits automatically and dynamically from

detected movements. In so doing, the run-on time is increased if presence continues or de-

creased if absence is detected.

Presence simulation

Presence simulationPresence simulation

In automatic operation, the motion detector continuously saves times for which the lighting was

switched on. A maximum of 60 switching operations are saved over a period of 24 hours. If

more switching operations take place, the oldest ones are overwritten respectively. If the pres-

ence simulation is activated, the motion detector switches the lighting at the saved times ac-

cording to the brightness. Switch-off takes place after the run-on time has elapsed. Detected

motions prolong the run-on time or the light is switched on depending on brightness. Times are

not saved.

3 / 19

82593223 27.06.2019

J0082593223

Marca:	Jung
Categoría:	Mando a distancia
Modelo:	DWPMFBIRI

Jung DWPMFBIRI Manual de Usario

Especificaciones del producto

¿Necesitas ayuda?

Mando a distancia Jung Manuales

Mando a distancia Manuales

Últimos Mando a distancia Manuales