JVC DLA-SH7NL Manual de Usario

JVC proyector DLA-SH7NL

Lee a continuación 📖 el manual en español para JVC DLA-SH7NL (72 páginas) en la categoría proyector. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/72

PROJECTOR

DLA-SH7NL

INSTRUCTIONS

(Lens is optional)

LCT2370-003F

Getting Started Connection and

Installation

Network Settings Operation and

Settings

Others

Thank you for purchasing this JVC product.

Please study this instruction manual carefully before

starting to operate the unit, in order to use the unit correctly.

We take no responsibility for any problems resulting from

misuse of this unit by operating this equipment other than

instructed in this manual.

For Customer use :

Enter below the serial No. which is

located on the bottom side of the

cabinet. Retain this information for

future reference.

Model No. DLA-SH7NL

Serial No.

Getting Started

IMPORTANT INFORMATION

About the installation place

Do not install the projector in a place that cannot

support its weight securely.

If the installation place is not sturdy enough, the

projector could fall or overturn, possibly causing

personal injury.

IMPORTANT SAFEGUARDS

Electrical energy can perform many useful functions.

This unit has been engineered and manufactured to

assure your personal safety. But IMPROPER USE

CAN RESULT IN POTENTIAL ELECTRICAL SHOCK

OR FIRE HAZARD. In order not to defeat the

safeguards incorporated into this product, observe the

following basic rules for its installation, use and

service. Please read these Important Safeguards

carefully before use.

-All the safety and operating instructions should be

read before the product is operated.

-The safety and operating instructions should be

retained for future reference.

-All warnings on the product and in the operating

instructions should be adhered to.

-All operating instructions should be followed.

-Place the projector near a wall outlet where the plug

can be easily unplugged.

-Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for cleaning.

-Do not use attachments not recommended by the

product manufacturer as they may be hazardous.

-Do not use this product near water. Do not use

immediately after moving from a low temperature to

high temperature, as this causes condensation, which

may result in fire, electric shock, or other hazards.

-Do not place this product on an unstable cart, stand,

or table. The product may fall, causing serious injury

to a child or adult, and serious damage to the product.

The product should be mounted according to the

manufacturer’s instructions, and should use a mount

recommended by the manufacturer.

-When the product is used on a cart,

care should be taken to avoid quick

stops, excessive force, and uneven

surfaces which may cause the

product and cart to overturn,

damaging equipment or causing

possible injury to the operator.

Safety Precautions

This product has a High Intensity

Discharge (HID) lamp that contains

mercury.

Disposal of these materials may be

regulated in your community due to

environmental considerations. For

disposal or recycling information, please

contact your local authorities or for USA,

the Electronic Industries Alliance:

http://www.eiae.org.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARDS, DO

NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

WARNING:

THIS APPARATUS MUST BE EARTHED.

CAUTION:

To reduce the risk of electric shock, do not remove

cover. Refer servicing to qualified service personnel.

This projector is equipped with a 3-blade grounding

type plug to satisfy FCC rule. If you are unable to

insert the plug into the outlet, contact your

electrician.

FCC INFORMATION (U.S.A. only)

CAUTION:

Changes or modification not approved by JVC could

void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to

comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference when the equipment is

operated in a commercial environment. This

equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instruction manual, may cause

harmful interference to radio communications.

Operation of this equipment in a residential area is

likely to cause harmful interference in which case

the user will be required to correct the interference

at his own expense.

MACHINE NOISE INFORMATION (Germany

only)

Changes Machine Noise Information Ordinance 3.

GSGV, January 18, 1991: The sound pressure level

at the operator position is equal or less than 70 dB

(A) according to ISO 7779.

-Slots and openings in the cabinet are provided for

ventilation. These ensure reliable operation of the

product and protect it from overheating. These

openings must not be blocked or covered. (The

openings should never be blocked by placing the

product on bed, sofa, rug, or similar surface. It should

not be placed in a built-in installation such as a

bookcase or rack unless proper ventilation is provided

and the manufacturer’s instructions have been

adhered to.) For proper ventilation, separate the

product from other equipment, which may prevent

ventilation and keep a distance (APage 14).

-This product should be operated only with the type of

power source indicated on the label. If you are not

sure of the type of power supply to your home, consult

your product dealer or local power company.

-This product is equipped with a three-wire plug. This

plug will fit only into a grounded power outlet. If you

are unable to insert the plug into the outlet, contact

your electrician to install the proper outlet. Do not

defeat the safety purpose of the grounded plug.

-The lens for this product is optional. Do not attach the

power cord when the lens is not attached. Turning on

the power when no lens is attached may result in fire,

electric shock, or other hazards.

-Power-supply cords should be routed so that they are

not likely to be walked on or pinched by items placed

upon or against them. Pay particular attention to cords

at doors, plugs, receptacles, and the point where they

exit from the product.

-For added protection of this product during a lightning

storm, or when it is left unattended and unused for

long periods of time, unplug it from the wall outlet and

disconnect the cable system. This will prevent

damage to the product due to lightning and power line

surges.

-Do not overload wall outlets, extension cords, or

convenience receptacles on other equipment as this

can result in a risk of fire or electric shock.

-Never push objects of any kind into this product

through openings as they may touch dangerous

voltage points or short out parts that could result in a

fire or electric shock. Never spill liquid of any kind on

the product.

-Do not attempt to service this product yourself as

opening or removing covers may expose you to

dangerous voltages and other hazards. Refer all

service to qualified service personnel.

-Unplug this product from the wall outlet and refer

service to qualified service personnel under the

following conditions:

a) When the power supply cord or plug is damaged.

b) If liquid has been spilled, or objects have fallen on the

product.

c) If the product has been exposed to rain or water.

d) If the product does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the Operation Manual, as an improper

adjustment of controls may result in damage and will often

require extensive work by a qualified technician to restore

the product to normal operation.

e) If the product has been dropped or damaged in any way.

f) When the product exhibits a distinct change in

performance - this indicates a need for service.

-When replacement parts are required, be sure the

service technician has used replacement parts

specified by the manufacturer or with same

characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock, or other

hazards.

-Upon completion of any service or repairs to this

product, ask the service technician to perform safety

checks to determine that the product is in proper

operating condition.

-The product should be placed more than one foot

away from heat sources such as radiators, heat

registers, stoves, and other products (including

amplifiers) that produce heat.

-When connecting other products such as VCR’s, and

DVD players, you should turn off the power of this

product for protection against electric shock.

-Do not place combustibles behind the cooling fan. For

example, cloth, paper, matches, aerosol cans or gas

lighters that present special hazards when over

heated.

-Do not look into the projection lens while the

illumination lamp is turned on. Exposure of your eyes

to the strong light can result in impaired eyesight.

-Do not look into the inside of this unit through vents

(ventilation holes), etc. Do not look at the illumination

lamp directly by opening the cabinet while the

illumination lamp is turned on. The illumination lamp

also contains ultraviolet rays and the light is so

powerful that your eyesight can be impaired.

-Do not drop, hit, or damage the light-source lamp

(lamp unit) in any way. It may cause the light-source

lamp to break and lead to injuries. Do not use a

damaged light source lamp. If the light-source lamp is

broken, ask your dealer to repair it. Fragments from a

broken light-source lamp may cause injuries.

-The light-source lamp used in this projector is a high

pressure lamp. Be careful when disposing of the

lightsource lamp. If anything is unclear, please consult

your dealer.

-Do not ceiling-mount the projector to a place which

tends to vibrate; otherwise, the attaching fixture of the

projector could be broken by the vibration, possibly

causing it to fall or overturn, which could lead to

personal injury.

-Use only the accessory cord designed for this product

to prevent shock.

*DO NOT allow any unqualified person to

install the unit.

Be sure to ask your dealer to install the unit (e.g.

attaching it to the ceiling) since special technical

knowledge and skills are required for installation. If

installation is performed by an unqualified person, it

may cause personal injury or electrical shock.

Especificaciones del producto

Marca:	JVC
Categoría:	proyector
Modelo:	DLA-SH7NL
Color del producto:	Wit
Temporizador:	Ja
Peso.:	7400 g
Peso del embalaje:	8400 g
Ancho del embalaje:	365 mm
Empaquetadura en profundidad:	410 mm
Altura del embalaje:	710 mm
Capacidad del tanque de agua:	8 l
Tipo temporizador:	Digitaal
potencia variable:	Ja
Funciones del aire acondicionado:	Koeling
Consumo anual de energía (refrigeración):	- kWu
Controlado remotamente:	Ja
Manejas):	Ja
Consumo de energía por hora (refrigeración):	- kWu
Capacidad de refrigeración (máx.):	- BTU/h
Duración del temporizador (máxima):	7.5 uur