Kanto P101 Manual de Usario

Lee a continuación 📖 el manual en español para Kanto P101 (8 páginas) en la categoría Accesorio para proyector. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
User Manual
P101/P101W Projector Ceiling Mount
Supporting your digital lifestyle
TILTING
EXTENDABLE
PROJECTOR
CEILING
MOUNT
English
22 lb
(10 kg) 3”-12”
(7.5 - 30cm)
360°
20°
Introduction
Table of Contents
Table of Contents / Introduction . . . . . . . . . . . . . 2
Supplied Parts & Hardware . . . . . . . . . . . . . . . . . . 3
Setup - Step 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Setup - Steps 2 to 4 . . . . . . . . . . . . . . . . . . . . . . . 5
Setup - Steps 5 to 7 . . . . . . . . . . . . . . . . . . . . . . . 6
Other Kanto Products . . . . . . . . . . . . . . . . . . . . . . 7
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2
Thank you for choosing a Kanto universal ceiling projector mount. The P101 and P101W are designed to mount TV
projectors weighing up to 22 lbs (10 kg). This mount kit allows for installations 3” (7.5 cm) from the ceiling, or 9” to 12”
(22.5 to 30cm) using the supplied extension tubes. The P101 and P101W provide a 360° swivel and a 20° tilt.
Read these instructions fully before installation of this mount. If you do not understand these directions, or have any
doubts about the safety of the installation, please consult a qualified installation contractor to install this mount. Make
sure there are no defective or missing parts. Do not use defective parts. If you are uncertain whether the part is defective
contact Kanto directly at 1-888-848-2643 or support@kantoliving.com. Kanto can not be liable for property damage or
injury caused by incorrect mounting, incorrect assembly, lifting or incorrect use of this product.
CAUTION
The maximum loading weight is 22 lbs (10 kg). This projector mount is intended for use up to the maximum
weight restrictions indicated. Use with products heavier than the maximum weights indicated may result in instability
causing possible injury.
CAUTION
The ceiling you plan to afx the Kanto mount to must be able to support more than 4 times the weight of
the projector and the ceiling mount combined. Do not use this product for any purpose other than to mount a
projector on a surface up to 20° from horizontal as outlined in this manual. Improper installation may cause damage
to your projector or serious injury. This product should not be mounted to drop ceilings, cinder block or old concrete
ceilings. Consult a qualified installation contractor if you are unsure about the type of ceiling you may have.
Visit our website at kantoliving.com for the most recent version of this manual
See installation video online at:
www.kantoliving.com
Supporting your digital lifestyle
Supplied Parts and Hardware
3
Required Tools:
M: Allen Keys
x2
N: M8 x 55mm Bolt
(with nut)
O: Safety Screw
M5 x 10mm
P: Set Screw
M5 x 5mm
x4x2
Q:
R:
S:
T: x4
each
U: Ceiling Plate
V: Projector Adapter W: Outer Extension
Tube
X: Inner Extension
Tube
Y: Extension Brackets
75mm / 150mm
Z: Wrench
x2
M2.5 x 15mm (with washers)
M3 x 15mm (with washers)
M3 x 20mm (with washers)
M4 x 15mm
M4 x 20mm
M4 x 25mm
M5 x 15mm
M5 x 20mm
M5 x 25mm
M6 x 15mm
M6 x 20mm
M6 x 25mm
x4
each
A:
B:
C:
D:
E:
F:
G:
H:
I:
J:
K:
L:
Bolts:
1mm thick
2mm thick
4mm thick
Base
Spacers:
x4
Crescent
Wrench
Phillips
Screwdriver

Especificaciones del producto

Marca: Kanto
Categoría: Accesorio para proyector
Modelo: P101

¿Necesitas ayuda?

Si necesitas ayuda con Kanto P101 haz una pregunta a continuación y otros usuarios te responderán




Accesorio para proyector Kanto Manuales

Accesorio para proyector Manuales

Últimos Accesorio para proyector Manuales