Klover MiK 26 Manual de Usario

Lee a continuación 📖 el manual en español para Klover MiK 26 (2 páginas) en la categoría micrófono. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
Klover MiK 26 Assembly Sequence
US Patent #9014402
Klover Products Inc.
5807 W Fenrick Rd, Janesville, WI 53548
(888) 299-9009 - support @KloverProducts.com
Step 1 - Install left and right handles with the connectors toward the center of the dish (plates outward)
Step 2 - Install rear cross bar (Rotate rear bar 180 degrees if the connectors won’t snap into place)
(You can use the optional monopod mount instead of standard cross bar for this step.)
Step 3 - - - U Focus microphone Option #1 se label to position mic 2 ¼” behind mic yoke
(Steps 4, thru 7 are on back ) of sheet
Klover Products Inc.
5807 W Fenrick Rd, Janesville, WI 53548
(888) 299-9009 - support @KloverProducts.com
Step 4 - Install Mic Yoke
Thumb screw should be on bottom, small targeting screws on top, and arrows in both end plates pointing up. end plateRemove second from
yoke, slide first end plate onto locator pins, then place second end plate onto locator pins on opposite side of dish and snap into place. (If the
end plates have been removed you may have switch the two end plates in order to properly align them. There are small flats on the connectors
that should match. They should both be horizontal or both vertical.)
Step 5 - mFocus icrophone - - Option #2 Position mic 4” behind front surface of dish using tape measure
Step 6 - Install electronics - Step 7 Install neck strap
Use slots to retain electronics and cables using Zip- S Ties nap buckles into place with strap inside of handles
and thick part of neck pad down (logo upright)

Especificaciones del producto

Marca: Klover
Categoría: micrófono
Modelo: MiK 26

¿Necesitas ayuda?

Si necesitas ayuda con Klover MiK 26 haz una pregunta a continuación y otros usuarios te responderán




micrófono Klover Manuales

micrófono Manuales

Últimos micrófono Manuales