Konig Electronic CMP-BLUEHS20 Manual de Usario

Konig Electronic Auriculares CMP-BLUEHS20

Lee a continuación 📖 el manual en español para Konig Electronic CMP-BLUEHS20 (58 páginas) en la categoría Auriculares. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/58
CMP-BLUEHS20
MANUAL (p. 2)
Stereo Bluetooth Design Headset
MODE D’EMPLOI (p. 10)
Casque Stéréo Bluetooth® Design
MANUALE (p. 18)
Cuffia stereo Bluetooth®
BRUKSANVISNING (s. 34)
Stereo Bluetooth® Designheadset
MANUAL DE UTILIZARE (p. 42)
Headset Design stereo cu Bluetooth®
BRUGERVEJLEDNING (p. 50)
Stereo Bluetooth® Design Headset
HASZNÁLATI ÚTMUTATÓ (o. 26.)
Sztereo Bluetooth® design headset
KÄYTTÖOHJE (s. 30)
Muotoillut Bluetooth®-stereokuulokkeet
ANLEITUNG (s. 6)
Stereo Bluetooth® Design Kopfhörer
GEBRUIKSAANWIJZING (p. 14)
Stereo Bluetooth® Design Hoofdtelefoon
MANUAL DE USO (p. 22)
Auriculares Estéreo de diseño Bluetooth®
NÁVOD K POUŽITÍ (s. 38)
Bluetooth® stereo sluchátka Design s
mikrofonem
ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 46)
Στερεοφωνικά Ακουστικά Bluetooth®
VEILEDNING (p. 54)
Stereo Bluetooth® design-hodesett
2
ENGLISH
Charging the headset
Before using for the rst time, please charge the battery for a minimum of 4 hours. Repeat this three times.
You can charge the headset with the USB cable. When the red light is on, the headset is charging. When the
red light is off, the battery of the headset is full.
When you hear three warning tones every 30 seconds and the red LED blinks two times, it means the battery
power is low and the battery needs to be charged.
Overview
1.) retractable string
2.) < key: last song
3.) > key: next song
4.) LED indicator
5.) multifunction button (MFB): switch the headset on/off, answer, end, and reject call, mute microphone,
voice dial and voice transfer, redial last number, pause and play
6.) + key: volume up
7.) – key: volume down
8.) charging port
9.) built-in microphone
Usage of the CMP-BLUEHS20
1. Switching the headset on/off
Function Operation LED indicator Indication tone
Switch on the headset Press O the for 3-5 seconds,
and release until the blue LED
blinks
The blue LED blinks quicklin
every 4 seconds4s a time
One tone
Switch off the headset Press O the for 3-5 seconds,
and release until the red LED
blinks
The red LED blinks quickly in
every 4 seconds4s a time
One tone
Remarks:
* The headset will switch off automatically if no device is connected after 5 minutes in order to save power.
3
2. Pairing the headset with Bluetooth devices
2.1. How to enter the pairing mode
Function Operation LED indicator Indication tone
Enter into pairing
mode
First, make sure the headset
is off. Press O for 5-7 seconds
and release until the red and
blue LEDs blink alternately
The red and blue LEDs blink
alternately
Two tones
Note:
* The pairing mode will last 2 minutes. If the headset still cannot pair with any Bluetooth devices, it will
automatically switch into standby mode.
2.2. Pairing the headset with a Bluetooth mobile phone
Please make sure your mobile phone has a Bluetooth function.
Specic pairing procedures may vary with different mobile phones. Please refer to your mobile phones’
manual for further information. The steps are as follows:
a. Please keep the headset and mobile phone within 1 metre of each other when pairing
b. Make the headset enter the pairing mode (please refer to 2.1)
c. Switch on the Bluetooth function of the mobile phone and search for Bluetooth devices. When the search
is completed, select the headset in the Bluetooth device list.
d. When prompted, enter PIN No: “0000” as the password and press “Yes” or “Confirm”.
e. After pairing the devices successfully, select the headset in the Bluetooth device list and press “Connect”.
f. If the connection is successful, the blue (or red) LED of the headset blinks twice every 4 seconds.
Note:
* If the pairing is not successful, please switch off headset rst then try to pair them again according to the
steps mentioned above.
* After pairing, the devices will remember each other.
* The headset will connect with the last paired device. If you want to pair it with other Bluetooth devices,
please switch off the Bluetooth function of the current Bluetooth device, then pair and connect the new
Bluetooth device according to steps mentioned above.
3. Pairing the headset with a Bluetooth transmitter
You can enjoy music wirelessly by connecting the headset with a stereo Bluetooth transmitter. See the
manual of your transmitter for more details.
4. Making a call with the headset
Function Status of the headset Operation Indicator tone
Voice dial Standby mode Press O for 2 seconds
and release until a tone is
heard
A long tone
Redial last number Standby mode Briey press O twice A long tone
Volume up Conversation mode Briey press + and then
release (or hold) it
None
Volume down Conversation mode Briey press – and then
release (or hold) it
None
Answer call Ringing Briefy press OA short tone
Reject call Ringing Press O for 2 seconds
and release until a tone is
heard
A short tone
End call Conversation mode Briey press OA short tone
Switch conversation
between headset and
mobile phone
Conversation mode Press O for 2 seconds
and release until a tone is
heard
A short tone

Especificaciones del producto

Marca: Konig Electronic
Categoría: Auriculares
Modelo: CMP-BLUEHS20

¿Necesitas ayuda?

Si necesitas ayuda con Konig Electronic CMP-BLUEHS20 haz una pregunta a continuación y otros usuarios te responderán


Auriculares Konig Electronic Manuales

Konig Electronic

Konig Electronic CMP-BLUEHS20 Manual de Usario

6 Septiembre 2024

Auriculares Manuales

Últimos Auriculares Manuales

Cabstone

Cabstone 95108 Manual de Usario

27 Octubre 2024
Cabstone

Cabstone Multimedia USB 95112 Manual de Usario

27 Octubre 2024
Plantronics

Plantronics Voyager Surround 80 UC Manual de Usario

25 Octubre 2024
Philips

Philips 1000 Series TAE1205 Manual de Usario

24 Octubre 2024
HP

HP Omen 800 Manual de Usario

24 Octubre 2024
Philips

Philips TAH6206 Manual de Usario

23 Octubre 2024
Pioneer

Pioneer SE-MJ722T Manual de Usario

22 Octubre 2024
Lamax

Lamax SteelClips1 ANC Manual de Usario

22 Octubre 2024
Lamax

Lamax SteelTones1 Manual de Usario

22 Octubre 2024
Lamax

Lamax SteelDots3 ANC Manual de Usario

22 Octubre 2024