Kramer SID-DP Manual de Usario

Lee a continuación 📖 el manual en español para Kramer SID-DP (2 páginas) en la categoría extensor AV. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
The Kramer SID- DisplayPort Step-In Commander DP
Congratulations on purchasing your Kramer DigiTOOLS
® SID-DP DisplayPort Step-In
Commander which is ideal for boardrooms and presentation rooms.
The Kramer is an HDCP compliant DisplayPort and unbalanced stereo audio SID-DP
remote device that used to remotely take control of a compatible switcher, for is
example, the Kramer . The commander does not need a power adapter if VP-81SID
located within 50m ( ft) of the switcher. 164
Figure 1 Table 1 and define the . SID- DP DisplayPort Step-In Commander
Figure 1 SID- DisplayPort Step-In Commander Front and Rear Panel : DP
Table 1 SID- DisplayPort Step-In Commander Front and Rear Panel Features : DP
#
Feature
Function
1
AUDIO INPUT 3.5mm Mini Jack
Connect to the unbalanced stereo audio source
2
DP INPUT DisplayPort Connector
Connect to the video source DP
3
STEP Button IN
Press to switch the input to this remote control commander The .
button lights when active
4
ON LED
Lights green when the unit receives power
5
LINE OUT Twisted Pair RJ-45
Connector
Connect to the TP input of compatible switcher (for example, the a
VP-81SID) using CAT 6 or higher specification cable
6
Remote Switch Terminal Block
Connections (pins 2 and 3)
Connect to the remote step-in switch
7
12V DC Power Connector
Connect to the power adapter
8
Remote LED Terminal Block
Connections (pins 1 and 2)
Connect to the remote LED (observe correct polarity, pin 1 to the
LED anode and pin 3 to the cathode)
Figure 2 illustrates how to connect the to a source switcher, and remote switch SID-DP ,
and LED.
Figure 2 SID- Wiring Connections : DP
To connect the SID- as illustrated in : DP Figure 2
1. Connect the DP video source (for example, a laptop graphics source to the )
DisplayPort connector on the front panel of the . SID-DP
2. Connect the unbalanced stereo audio source (for example, a laptop graphics source)
to the 3.5mm mini jack AUDIO INPUT connector on the front of the SID-DP.
3. Using STP cable, connect the LINE OUT RJ- TP connector on the rear panel of 45
the to the required input on the rear panel of the (up to 50m SID-DP VP-81SID
away).
4. Optional Connect the terminal block on the rear of the to the remote S -ID DP
switch and LED.
Note: The LED supply includes a current limiting resistor and is designed to work
with any standard LED.
5. Connect the power adapter to the 12V DC connector on the rear of the and SID-DP
to the mains electricity (if the distance exceeds 50m ( ft) from the switcher). 164
Technical Specifications
Technical specifications of the are shown in SID- DP Table 2.
Table 2 Technical specifications: 1of the SID- DisplayPort Step-In Commander DP
INPUTS:
Video: DisplayPort
Audio: 3.5mm mini jack
OUTPUT:
TP on an RJ-45 Ethernet connector
STEP-IN COMMANDER
DISTANCE:
50m (164ft)
POWER SOURCE:
12V DC, 230mA
OPERATING
TEMPERATURE:
0° to +40°C (3 to 104°F)
STORAGE
TEMPERATURE:
4 to +70°C (40° to 158°F)
HUMIDITY:
10% to 90%, RHL non-condensing
DIMENSIONS:
12.1cm x 7cm x 2.4cm (4.7 x 2.76 x 0.94) W, D, H
WEIGHT:
0.3kg (0.66lbs) approx
ACCESSORIES:
Power supply
1 are subject to change without notice Product details
SID- DP
DisplayPort Step-In Commander
Installation Instructions
For the latest information on our products and a list of Kramer distributors,
visit our Web site at www.kramerelectronics.com
P/N:
2900- 000710
Rev:
Kramer Electronics, Ltd.
Web site: www.kramerelectronics.com
E-mail: info@kramerel.com
P/N: 2900-000710 REV 3

Especificaciones del producto

Marca: Kramer
Categoría: extensor AV
Modelo: SID-DP

¿Necesitas ayuda?

Si necesitas ayuda con Kramer SID-DP haz una pregunta a continuación y otros usuarios te responderán




extensor AV Kramer Manuales

extensor AV Manuales

Últimos extensor AV Manuales