Kress KUE11 Manual de Usario

Kress máquina de aserrar KUE11

Lee a continuación 📖 el manual en español para Kress KUE11 (16 páginas) en la categoría máquina de aserrar. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/16

SAFETY AND OPERATING MANUAL

Lithium-Ion brushless circular saw

KUE11 KUE11.9

Lithium-Ion brushless circular saw

KUE11 KUE11.9

PRODUCT SAFETY

GENERAL SAFETY

WARNINGS

WARNING Read all safety warnings,

instructions, illustrations and

speciﬁcations provided with this power tool.

Failure to follow all instructions listed below may

result in electric shock, re and/or serious injury.

Save all warnings and instructions for future

reference.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-

operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit.

Cluttered

or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

ﬂammable liquids, gases or dust.

Power

tools create sparks which may ignite the dust or

fumes.

c) Keep children and bystanders away while

operating a power tool.

Distractions can

cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet.

Never modify the plug in any way. Do

not use any adapter plugs with earthed

(grounded) power tools.

Unmodied plugs

and matching outlets will reduce risk of electric

shock.

b) Avoid body contact with earthed or

grounded surfaces, such as pipes,

radiators, ranges and refrigerators.

There is

an increased risk of electric shock if your body is

earthed or grounded.

c) Do not expose power tools to rain or wet

conditions.

Water entering a power tool will

increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the

power tool. Keep cord away from heat,

oil, sharp edges or moving parts.

Damaged

or entangled cords increase the risk of electric

shock.

e) When operating a power tool outdoors,

use an extension cord suitable for outdoor

use.

Use of a cord suitable for outdoor use

reduces the risk of electric shock.

f) If operating a power tool in a damp

location is unavoidable, use a residual

current device (RCD) protected supply.

Use

of an RCD reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and

use common sense when operating a

power tool. Do not use a power tool while

you are tired or under the inﬂuence of

drugs, alcohol or medication.

A moment of

inattention while operating power tools may result

in serious personal injury.

b) Use personal protective equipment.

Always wear eye protection.

Protective

equipment such as dust mask, non-skid safety

shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal

injuries.

c) Prevent unintentional starting. Ensure

the switch is in the off-position before

connecting to power source and/or battery

pack, picking up or carrying the tool.

Carrying power tools with your nger on the

switch or energising power tools that have the

switch on invites accidents.

d) Remove any adjusting key or wrench

before turning the power tool on.

A wrench

or a key left attached to a rotating part of the

power tool may result in personal injury.

e) Do not overreach. Keep proper footing

and balance at all times.

This enables better

control of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing

or jewellery. Keep your hair and clothing

away from moving parts.

Loose clothes,

jewellery or long hair can be caught in moving

parts.

g) If devices are provided for the connection

of dust extraction and collection facilities,

ensure these are connected and properly

used.

Use of dust collection can reduce dust-

related hazards.

h) Do not let familiarity gained from

frequent use of tools allow you to become

complacent and ignore tool safety

principles.

A careless action can cause severe

injury within a fraction of a second.

4) Power tool use and care

a) Do not force the power tool. Use the

correct power tool for your application.

The correct power tool will do the job better and

safer at the rate for which it was designed.

b) Do not use the power tool if the switch

does not turn it on and off.

Any power tool

that cannot be controlled with the switch is

dangerous and must be repaired.

c) Disconnect the plug from the power

source and/or remove the battery pack,

if detachable, from the power tool before

making any adjustments, changing

accessories, or storing power tools.

Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tool or these

instructions to operate the power tool.

Power tools are dangerous in the hands of

untrained users.

Especificaciones del producto

Marca:	Kress
Categoría:	máquina de aserrar
Modelo:	KUE11
Peso.:	48 g
Ancho:	40 mm
Profundidad:	12 mm
Altura:	87 mm
Longitud del cable:	0.13 m
Peso del embalaje:	84 g
Ancho del embalaje:	95 mm
Empaquetadura en profundidad:	20 mm
Altura del embalaje:	190 mm
Manual de usuario:	Ja
Material de la carcasa:	Metaal
Indicadores LED:	Nee
Cables suministrados:	USB Type-C
Guía de inicio rápido:	Ja
Conecta y reproduce:	Ja
Soporta Windows:	Windows 10, Windows 7, Windows 8, Windows 8.1
Número de puertos USB 3.2 Gen 2 (3.1 Gen 2) Tipo C:	2
Soporta el sistema operativo Mac:	Ja
Compatible con Linux:	Ja
Interfaz de host:	USB 3.2 Gen 2 (3.1 Gen 2) Type-C
Número de puertos USB 3.2 Gen 2 (3.1 Gen 2) Tipo A:	2
Otros sistemas de apoyo:	Android
Protección de sobrecarga:	Ja
Ratio de transferencia:	10000 Mbit/s
Número de puertos:	4
Interfaces de concentrador:	USB 3.2 Gen 2 (3.1 Gen 2) Type-A, USB 3.2 Gen 2 (3.1 Gen 2) Type-C