La Crosse WS6118 Manual de Usario
Lee a continuación 📖 el manual en español para La Crosse WS6118 (13 páginas) en la categoría Reloj. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/13
15
LCD2
display
LCD1
display
Battery cover
Hanging holes
Foldable stand
MOONPHASE WALL CLOCK
Instruction Manual
FEATURES:
MOONPHASE WALL CLOCK:
• DCF-77 Radio controlled time with manual setting option
• 12/24 hour time display
• Time display: hour, minute, second
• Alarm setting with snooze function
• Calendar display
Function keys
« Instant Transmission+» is the up and coming state-of-the-art new wireless
transmission technology, exclusively designed and developed by LA CROSSE
TECHNOLOGY.
“IT +” offers you an immediate update of all your outdoor data measured from the
transmitters: follow your climatic variations in real-time!
16
• Weekday display (4 languages to choose from: German, English, French, and Spanish)
• Display 12 Moon phases throughout the year
• Time zone setting
• ºC or ºF temperature display selectable
• Indoor temperature display
• Outdoor temperature display
• Wireless transmission at 868MHz
•
Signal reception intervals at 4 seconds
• Low battery indicator
• Wall mount or freestanding
OUTDOOR TEMPERATURE TRANSMITTER:
• Remote transmission of outdoor temperature to Weather Station
by 868 MHz
• Wall mounting case
• Mounting at a sheltered place. Avoid direct rain and sunshine
TO INSTALL AND REPLACE BATTERIES IN THE MOONPHASE WALL CLOCK
The Moonphase wall clock uses 2 x AA, IEC LR6, 1.5V batteries. To install and replace the
batteries, please follow the steps below:
1. Insert finger or other solid object in the space at the bottom center of the battery
compartment and lift up to remove the cover.
2. Insert batteries observing the correct polarity (see marking inside battery compartment).
3. Replace compartment cover.
DO NOT SET THE CLOCK.
TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE
TRANSMITTER
The transmitter uses 2 x AA, IEC LR6, 1.5V batteries. To install and replace the batteries, please
follow the steps below:
1. Remove the cover.
17
2. Insert the batteries, observing the correct polarity (see battery compartment marking).
3. Replace the battery cover on the unit.
Alkaline batteries are recommended for use in both units. Avoid using rechargable
batteries.
SETTING UP:
1. Insert the 2 x AA, IEC LR6, 1.5V batteries into the transmitter (See “To install and
replace batteries in the Temperature Transmitter” above).
2. Within 3 minutes, insert 2 x AA, IEC LR6, 1.5V batteries into the Moonphase wall clock as
indicated above (see "To install and replace batteries in the Moonphase wall clock“
above).
3. Once the batteries are in place, all segments of the LCD will light up briefly. Then the
indoor and outdoor temperature - -.-°C, the time as 0:00, the date as 1/1, and weekday will
be displayed.
4. Do not press any buttons for 10 minutes
5. The Moonphase wall clock will start receiving data from the transmitter. The remote
temperature will then be displayed on the Moonphase wall clock. If the outdoor
temperature is not displayed 90 seconds after inserting the batteries into the receiver, all
batteries are needed to be removed and wait for at least 1 minute for reset from step 1.
6. The DCF time code reception will automatically start. This takes typically between 3 - 5
minutes in good conditions. This time period is an excellent opportunity to locate the
transmitter in suitable location outdoors. In order to ensure sufficient 868MHz transmission
however, this should under good conditions be no more than 100 meters from where the
Moonphase wall clock will be finally positioned (see notes on “Positioning” and “868MHz
Reception”).
7. If after 10 minutes the DCF time has not been received, use the SET key to manually enter
the set mode and change either the time or date in order to activate the DCF reception.
When this is successful, the received time will override the manually set time. The date is
also updated with the received time (Please refers to notes on “DCF Radio controlled
time” and “Manual time setting”).
Note:
In the event of changing batteries of the unit ensure that the batteries do not spring free from the
contacts. Always wait at least 1 minute after removing the batteries before reinserting, otherwise
start up and transmission problems may occur.
Especificaciones del producto
| Marca: | La Crosse |
| Categoría: | Reloj |
| Modelo: | WS6118 |
¿Necesitas ayuda?
Si necesitas ayuda con La Crosse WS6118 haz una pregunta a continuación y otros usuarios te responderán
Reloj La Crosse Manuales
3 Septiembre 2024
Reloj Manuales
- Reloj Casio
- Reloj IKEA
- Reloj Ascot
- Reloj Invicta
- Reloj Ecom
- Reloj Nedis
- Reloj Livoo
- Reloj ECG
- Reloj RCA
- Reloj United Office
- Reloj Lenovo
- Reloj Karlsson
- Reloj Elro
- Reloj Vitek
- Reloj Hama
- Reloj Cresta
- Reloj Velleman
- Reloj La Crosse Technology
- Reloj Marquant
- Reloj AcuRite
- Reloj Muse
- Reloj Auriol
- Reloj Ventus
- Reloj Technoline
- Reloj AV:link
- Reloj Audiovox
- Reloj Balance Time
- Reloj Valcom
- Reloj Hager
- Reloj TFA
- Reloj Irox
- Reloj Konig
- Reloj Jung
- Reloj Krontaler
- Reloj Ranex
- Reloj Geemarc
- Reloj IHome
- Reloj Dormakaba
- Reloj Global Tronics
- Reloj Oregon Scientific
- Reloj TFA Dostmann
- Reloj Kogan
- Reloj Antelope Audio
- Reloj Equity
- Reloj Techno Line
- Reloj Gingko
- Reloj CyberData Systems
- Reloj Electronics International
- Reloj Antelope
- Reloj Bearware
Últimos Reloj Manuales
25 Octubre 2024
19 Octubre 2024
18 Octubre 2024
11 Octubre 2024
7 Octubre 2024
6 Octubre 2024
5 Octubre 2024
3 Octubre 2024
3 Octubre 2024
3 Octubre 2024