La Crosse WS8167 Manual de Usario

La Crosse Reloj WS8167

Lee a continuación 📖 el manual en español para La Crosse WS8167 (15 páginas) en la categoría Reloj. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/15

868MHZ WEATHER WALL CLOCK

Instruction Manual

LCD2

display Battery cover

LCD1

display

Hanging holes

Foldable

stand

LCD3

display

FEATURES:

WEATHER WALL CLOCK:

Function keys

« Instant Transmission+» is the up and coming state-of-the-art new wireless transmission

technology, exclusively designed and developed by LA CROSSE TECHNOLOGY.

“IT +” offers you an immediate update of all your outdoor data measured from the

transmitters: follow your climatic variations in real-time!

• DCF-77 Radio controlled time with manual setting option

• Time display: hour, minute, second

• Alarm setting with snooze function

• Calendar display

• Weekday display (3 languages to choose from: German, English, and French)

• Weather forecasting with 3 weather icons

• Weather tendency indicator

• Time zone setting

• ºC or ºF temperature display selectable

• Indoor temperature display

• Wireless transmission at 868 MHz

• Signal reception intervals at 4 seconds

• Wall mount or freestanding

TEMPERATURE TRANSMITTER:

• Remote transmission of outdoor temperature to weather station by 868

MHz signal

• Wall mounting case

• Mounting at a sheltered place. Avoid direct rain and sunshine

TO INSTALL AND REPLACE BATTERIES IN THE WEATHER WALL CLOCK

The weather wall clock uses 2 x AA, IEC LR6, 1.5V

batteries. To install and replace the batteries, please follow

the steps below:

1. Insert finger or other solid object in the space at the

bottom center of the battery compartment and lift up

to remove the cover.

2. Insert batteries observing the correct polarity (see

marking inside battery compartment).

3. Replace compartment cover.

TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER

The transmitter uses 2 x AA, IEC LR6, 1.5V batteries. To install and replace the

batteries, please follow the steps below:

1. Remove the cover.

2. Insert the batteries, observing the correct polarity (see marking inside

battery compartment).

3. Replace the battery cover on the unit.

SETTING UP:

1. Insert the 2 x AA, IEC LR6, 1.5V batteries into the transmitter (See “To install and replace

batteries in the Temperature Transmitter” above).

2. Within 2 minutes, insert 2 x AA, IEC LR6, 1.5V batteries into the Weather wall clock as

indicated above (see "To install and replace batteries in the Weather wall clock“ above).

3. Once the batteries are in place, all segments of the LCD will light up briefly and a brief bip

sound will be hear. Then the indoor and outdoor temperature - -.-°C, the time as 0:00, the date

as 1/1, and weekday will be displayed.

4. Do not press any buttons for 10 minutes

5. The Weather wall clock will start receiving data from the transmitter. The remote temperature

will then be displayed on the Weather wall clock. If the outdoor temperature is not displayed 60

seconds after inserting the batteries into the receiver, all batteries are needed to be removed

and wait for at least 1 minute for reset from step 1.

6. The DCF time code reception will automatically start. This takes typically between 3 - 5 minutes

in good conditions. This time period is an excellent opportunity to locate the transmitter in

suitable location outdoors. In order to ensure sufficient 868MHz transmission however, this

should under good conditions be no more than 100 meters from where the Weather wall clock

will be finally positioned (see notes on “Positioning” and “868MHz Reception”).

7. If after 10 minutes the DCF time has not been received, use the SET key to manually enter the

set mode and change either the time or date in order to activate the DCF reception. The clock

will then automatically attempt to receive the DCF time every full hour each day. When this is

successful, the received time will override the manually set time. The date is also updated with

the received time (Please refers to notes on “DCF Radio controlled time” and “Manual time

setting”).

8. The indoor temperature will be measured after the DCF reception.

Note:

In the event of changing batteries of the unit ensure that the batteries do not spring free from the

contacts. Always wait at least 1 minute after removing the batteries before reinserting, otherwise start

up and transmission problems may occur.

FUNCTION KEYS

The weather wall clock has four easy to use keys:

SET key : To enter into the set mode for the following functions: L time zone, language,

manual time setting, year, month, day, weekday, and ºC or ºF temperature display

+ key : To toggle between the weekday/date, alarm time, or second display

To change the values in manual set mode

Especificaciones del producto

Marca:	La Crosse
Categoría:	Reloj
Modelo:	WS8167
Color del producto:	Zilver
Peso.:	235 g
Ancho:	157 mm
Profundidad:	77.5 mm
Altura:	13.8 mm
Manual de usuario:	Ja
Capacidad del acumulador/batería:	10000 mAh
Tipo de embalaje:	Hangende doos
Cables suministrados:	USB Type-C naar USB Type-C
Carga rápida:	Ja
Carga inalambrica:	Ja
Certificados de sostenibilidad:	CE
Cantidad por paquete:	1 stuk(s)
Fuente de carga:	USB
Protección de voltaje de energía:	Over power, Over voltage, Overdischarge, Short circuit
Peso de la batería:	188 g
Entrega de energía USB:	Ja
Compatibilidad del cargador:	Digital camera, Gaming controller, Mobile phone/Smartphone
Número de dispositivos conectados simultáneamente (máx.):	2
Interfaz de entrada:	USB Type-C
Número de puertos USB tipo C:	1
Tecnología de batería:	Lithium-Polymeer (LiPo)
Tipo-de-visualización:	LED
Número de celdas de batería:	2
Tecnología de carga rápida:	Quick Charge 3.0
Puertos de salida USB tipo A:	2