Lenco EPB-440 Manual de Usario

Lenco Auriculares EPB-440

Lee a continuación 📖 el manual en español para Lenco EPB-440 (21 páginas) en la categoría Auriculares. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/21
1
Model: EPB- 440
User Manual Waterproof (IP67) TWS Bluetooth earphones
with charging case
Gebruikshandleiding Waterdichte (IP67) TWS
Bluetooth-oortelefoon met oplaadocking
Bedienungsanleitung Wasserdichter (IP67) TWS
Bluetooth-Ohrhörer mit Ladestab
Mode d’eploi Éouteus Bluetooth TWS étahes à leau
(IP67) avec boîtier de charge
Manual de usuario Auriculares Bluetooth impermeables
(IP67) con carcasa de carga
Index
ENGLISH ......................................................................... 2
NEDERLANDS ................................................................. 6
DEUTSCH ...................................................................... 10
FRANÇAIS ..................................................................... 14
ESPAÑOL ...................................................................... 18
Version: 1.0
2
ENGLISH
EPB- 440
CAUTION:
Usage of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
This unit should not be adjusted or repaired by anyone except
qualified service personnel.
PRECAUTIONS BEFORE USE
KEEP THESE INSTRUCTIONS IN MIND:
1. Clean only with a slightly damp cloth.
2. Install in accordance with the supplied user manual.
3. * Do’t step o o pih the poe adapto. Be e aeful,
patiulal ea the plugs ad the ale’s eit poit. Do ot
place heavy items on the power adaptor, which may damage
it. Keep the etie deie out of hilde’s eah! Whe
playing with the power cable, they can seriously injure
themselves.
4. * Unplug this device during lightning storms or when unused
for a long period.
5. Keep the device away from heat sources such as radiators,
heaters, stoves, candles and other heat-generating products
or naked flame.
6. Avoid using the device near strong magnetic fields.
7. Electrostatic discharge can disturb normal usage of this
device. If so, simply reset and restart the device following the
instruction manual. During file transmission, please handle
with care and operate in a static-free environment.
8. Warning! Never insert an object into the product through the
vents or openings. High voltage flows through the product
and inserting an object can cause electric shock and/or short
circuit internal parts. For the same reason, do not spill water
or liquid on the product.
9. Although this device is manufactured with the utmost care
and checked several times before leaving the factory, it is still
possible that problems may occur, as with all electrical
appliances. If you notice smoke, an excessive build-up of heat
or any other unexpected phenomena, you should disconnect
the plug from the main power socket immediately.
10. This device must operate on a power source as specified on
the specification label. If you are not sure of the type of
power supply used in your home, consult your dealer or local
power company.
11. * The socket outlet must be installed near the equipment and
must be easily accessible.
12. * Do not overload ac outlets or extension cords. Overloading
can cause fire or electric shock.
13. * Devices with class 1 construction should be connected to a
main socket outlet with a protective earthed connection.
14. * Devices with class 2 construction do not require a earthed
connection.
15. Keep away from rodents. Rodents enjoy biting on power
cords.
16. * Always hold the plug when pulling it out of the main supply
socket. Do not pull the power cord. This can cause a short
circuit.
17. Avoid placing the device on any surfaces that may be subject
to vibrations or shocks.
18. To clean the device, use a soft dry cloth. Do not use solvents
or petrol based fluids. To remove severe stains, you may use a
damp cloth with dilute detergent.
19. The supplier is not responsible for damage or lost data caused
by malfunction, misuse, modification of the device or battery
replacement.
20. Do not interrupt the connection when the device is
formatting or transferring files. Otherwise, data may be
corrupted or lost.
21. If the unit has USB playback function, the usb memory stick
should e plugged ito the uit dietl. Do’t use a usb
extension cable because it can cause interference resulting in
failing of data.
22. * To completely disconnect the power input, the mains plug
of the apparatus shall be disconnected from the mains, as the
disconnect device is the mains plug of apparat us.
23. If the unit works with battery, Battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
24. Attention should be drawn to the environmental aspects of
battery disposal.
25. The apparatus can only be used in moderate extremely cold
or climates warm environments should be avoided.
26. The rating label has been marked on the bottom or back
panel of the apparatus.
27. This device is not intended for use by people (including
children) with physical, sensory or mental disabilities, or a
lak of epeiee ad koledge, uless the’e ude
supervision or have received instructions about the correct
use of the device by the person who is responsible for their
safety.
28. This product is intended for non professional use only and not
for commercial or industrial use.
29. Make sure the unit is adjusted to a stable position. Damage
caused by using this product in an unstable position or by
failure to follow any other warning or precaution contained
within this user manual will not be covered by warranty.
30. Never remove the casing of this apparatus.
31. Never place this apparatus on other electrical equipment.
32. Do not use or store this product in a place where it is subject
to direct sunlight, heat, excessive dust or vibratio n.
33. Do not allow children access to plastic bags.
34. Only use attachments/accessories specified by the
manufacturer.
35. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as the power supply cord or the plug, does not operate
normally, or has been dropped.
36. * Do not use a damaged power cord or plug or a loose outlet.
Doing so may result in fire or electric shock.
37. Prolonged exposure to loud sounds from personal music
players may lead to temporary or permanent hearing loss.
INSTALLATION
Unpack all parts and remove protective material.
* Do not connect the unit to the mains before checking the
mains voltage and before all other connections have been
made.
3
* Those instruction are related only to products using power cable
or AC power adaptor.
Component:
1. Home-Key
6. Earbuds
2. LED indicator light
7. Earphone Silicone
3. Power supply indicator lamp
8. Charging Input
4. Charger output
9. Conversation Hole
5. PowerKey
User manual
Power on: Long press home key until the blue indicator light flash,
the ou ill hea oie popt poe o.
Power off: Long press Home-key until the red Indicator light on 2
second, then you will hear voice prompt poe off.
Connected: Blue lights flash every 4 seconds
Coming calls: Blue lights flash quickly.
Accept call: Short press Home-key on Right earbud
press key once
Reject Call: Press 1 sec. Home-key on earbud Right
Music: Press home key once is PAUSE
Press 2 times Home key is NEXT song
Press 3 times Home key is PREVIOUS song
Re-connection: Auto reconnect the paired phone when turned on
(some mobiles need to manual to reconnect on the phone)
Eartips: the product is delivered with 3 pairs of eartips.
It is very important that you select the right size of eartip fitting the
best your ears. Fore 2 reasons: the comfort and stability and also for
the quality of the sound: if you have the right size, the sound quality
will be the best: good bass and clear music. If the size is wrong, the
sound could be bad, flat, no bass.
Bluetooth pairing (dual headset):
1. Take the  eauds out of the hagig ase ad pess R ad L
Home-keys together for 1 second until blue light appear on each
earbud, then short red light. The blue light will shortly flashes
every 4 seconds to show that the earbuds are paired together.
2. First time pairing of the earbuds with your mobile phone. Long
press the Home-ke of the R eaud util lue/ed lights ae
flashing alternatively. Activate the bluetooth on your mobile
phone and look for the Lenco EPB-440 device in the bluetooth
deie list ad selet it. The lue/ed light o the R eaud ill
then stop flashing and your pair of earbuds are now connected
with the mobile phone. In the earbuds you can ear the voice
essage phoe oeted ad the lue led ill flash ee
seconds on each earbud while in use.
3. When you want to stop listening to your earphones, just long
press the right Home-key until red led is lighting, then the leds
will be OFF on both earbuds.
I the eauds ou a ea the oie essage poe off.
How to wear:
The Leaud should e put i the Left ea ad the R eaud i
the Right ear. The best position is to enter the earbud vertically into
the ear with the Lad the Rlette o top ad tu eah eaud
towards the back direction of the ear and try to find the position
where the earbud is not moving when you shake your head.
Charging the two earbuds
1. Put each earbud into the charging case. The charging is done by
= L
= M
= S

Especificaciones del producto

Marca: Lenco
Categoría: Auriculares
Modelo: EPB-440

¿Necesitas ayuda?

Si necesitas ayuda con Lenco EPB-440 haz una pregunta a continuación y otros usuarios te responderán




Auriculares Lenco Manuales

Auriculares Manuales

Últimos Auriculares Manuales