Logic3 Media Remote Control LG291 Manual de Usario

Logic3 Mando a distancia Media Remote Control LG291

Lee a continuación 📖 el manual en español para Logic3 Media Remote Control LG291 (36 páginas) en la categoría Mando a distancia. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/36

Media Remote Control (LG291)

User Manual

User Manual English

Guide d’utilisation Français

Benutzerhandbuch Deutsch

Manuale per l’utente Italiano

Manual del usuario Español

Manual do Utilizador Português

Handboek Nederlands

Product Code. LG291

www.logic3.com

1 2

3 4

User Manual English

Thank you for purchasing the Logic3 Media Remote Control. As with all Logic3 products it has been

built to the highest manufacturing standards and tested throughout its development, to ensure you get

the best possible product. Please read through and familiarise yourself with this manual before you use

the Media Remote Control.

Product Overview

NOTE : All Buttons are Software/System dependant they may not work on all Applications

Setup of Media Remote Control

Play/Pause

Link

Stop

Mute

Volume

Down

Volume Up

Link

Indicator

ID Link

Remote Control USB Receiver

BATTERY

CR2032

User Manual English

Setup/Pairing Media Remote Control

1. Remove the USB receiver from the back of the remote control

Open the battery lid and put in the battery, replace battery lid.

WARNING: Please ensure that the battery is inserted correctly. If the battery is inserted

incorrectly (reversed polarity), this may cause personal injury as well as damage to your

Media Remote Control.

2. Plug the USB receiver into the USB port of your Note Book.

3. Press the ID link button on the USB receiver (Link Indicator will light up).

4. Press and hold the Link button on the remote control until the Link Indicator on the receiver starts to

blink 1-3 times, after this the Link Indicator will switch off, this will indicate pairing is successful.

5. To test if paring is successful if a button on the remote control is pressed the Link Indicator will flash.

For MAC OS.X. Please follow the below steps (Only to be performed the first time the remote

is used):-

（）1 When you first plug-in the Receiver, the Mac OS X keyboard pairing window will be displayed

on screen.

（）2 Follow Pairing as explained in Setup/Pairing of Media Remote Control

（）3 Click 'Continue’ on the Keyboard Setup Assistant.

Note : Media Remote Control is designed to be seen by your system as a keyboard to enable

you to use it without installing additional software drivers (re-spin this as needed).

Especificaciones del producto

Marca:	Logic3
Categoría:	Mando a distancia
Modelo:	Media Remote Control LG291
Color del producto:	Zwart
Pantalla incorporada:	Nee
Peso.:	243 g
Ancho:	44 mm
Profundidad:	44 mm
Altura:	89 mm
Indicadores LED:	Ja
Capacidad del acumulador/batería:	10400 mAh
Actual:	2.0 A
Cables suministrados:	Micro-USB
Voltaje de entrada:	5.0 V
Fuente de carga:	USB
Corriente de salida:	2.1 A
Abarcando:	5 V
Compatibilidad del cargador:	Mobile phone/Smartphone, Tablet, MP3/MP4, GPS, E-book reader
Tecnología de batería:	Lithium-Ion (Li-Ion)