Lutron RRD-W3BRL Manual de Usario

Lutron Mando a distancia RRD-W3BRL

Lee a continuación 📖 el manual en español para Lutron RRD-W3BRL (8 páginas) en la categoría Mando a distancia. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/8
product specifications 09.25.15369968a
RadioRA 2 C ®• L® Hybrid Keypads
1Technical Support: 1.800.523.9466 (U.S.A)www.lutron.com
RadioRA® 2 C•L Hybrid Keypads function as ®
a dimmer and keypad combined into a single
device. C•L Hybrid Keypads are great for ®
retro-fit applications since they eliminate the
need to install two separate devices.
C•L Hybrid Keypads are neutral-wire controls ®
that can be used with small loads, such as
screw-in CFL/LED lamps. Normal keypad
operation will be available even if the attached
load is not installed or the lamp is burned out.
C•L Hybrid Keypads can be controlled as ®
part of a lighting control system and
incorporate advanced features such as fade
on / fade off and rapid full on.
C•L Hybrid Keypads feature large, ®
easy-to-use buttons, plus a unique backlit
engraving option that makes them readable
any time of the day or night. The C
•L® Hybrid
Keypad buttons are rounded, allowing
engraving to be displayed at an upward angle,
increasing readability. C•L® Hybrid Keypads
include a Front Accessible Service Switch
(FASSTM) for safe lamp replacement.
Use only Lutron or ® Designer (Claro®
SatinColors ) wallplates. The mechanical ®
design of the keypad is compatible with
Lutron® wallplates ONLY and is NOT
compatible with any other manufacturer’s
wallplate. Wallplates are sold separately.
Lutron Claro® ® ® and SatinColors wallplates
snap on with no visible means of attachment.
Replacement Button Kits are available in a
variety of colors and with custom engraving to
identify clearly each button’s function.
C•L Hybrid Keypads are designed for use ®
with permanently installed incandescent,
tungsten halogen, CFL/LED, magnetic
low-voltage, or Lutron® Hi-lume® A-Series LTE
LED drivers only.
RD-RD
RRD-HN5BRL
RRD-HN6BRL
RRD-HN3S RRD-HN4S
RRD-HN3BSRLRRD-HN2RLDRRD-HN1RLD
C•L® Hybrid Keypads
product specifications 09.25.15369968a
RadioRA 2 C ®• L® Hybrid Keypads
2Technical Support: 1.800.523.9466 (U.S.A)www.lutron.com
Model Numbers
RRD-HN1RLD-XX* Dual-Group with Raise/Lower Keypad Neutral-Wire Dimmer. 450 W/450 VA (Incandescent/
Halogen/Magnetic Low Voltage) or 100 W (approved CFL/LED) 120 V~
RKD-H1RLD-XX*-E Engraved Replacement Button Kit
RRD-HN2RLD-XX* Dual-Group with Dual Raise/Lower Keypad Neutral-Wire Dimmer. 450 W/450 VA (Incandescent/
Halogen/Magnetic Low Voltage) or 100 W (approved CFL/LED) 120 V~
RKD-H2RLD-XX*-E Engraved Replacement Button Kit
RRD-HN3BSRL-XX* 3-Button with Raise/Lower Keypad Neutral-Wire Dimmer. 450 W/450 VA (Incandescent/Halogen/
Magnetic Low Voltage) or 100 W (approved CFL/LED) 120 V~
RKD-H3BSRL-XX*-E Engraved Replacement Button Kit
RRD-HN3S-XX* 3-Scene with Raise/Lower Keypad Neutral-Wire Dimmer. 450 W/450 VA (Incandescent/Halogen/
Magnetic Low Voltage) or 100 W (approved CFL/LED) 120 V~
RKD-H3S-XX*-E Engraved Replacement Button Kit
RRD-HN4S-XX* 4-Scene with Raise/Lower Keypad Neutral Wire Dimmer. 450 W/450 VA (Incandescent/Halogen/
Magnetic Low Voltage) or 100 W (approved CFL/LED) 120 V~
RKD-H4S-XX*-E Engraved Replacement Button Kit
RRD-HN5BRL-XX* 5-Button with Raise/Lower Keypad Neutral Wire Dimmer. 450 W/450 VA (Incandescent/Halogen/
Magnetic Low Voltage) or 100 W (approved CFL/LED) 120 V~
RKD-H5BRL-XX*-E Engraved Replacement Button Kit
RRD-HN6BRL-XX* 6-Button with Raise/Lower Keypad Neutral Wire Dimmer. 450 W/450 VA (Incandescent/Halogen/
Magnetic Low Voltage) or 100 W (approved CFL/LED) 120 V~
RKD-H6BRL-XX*-E Engraved Replacement Button Kit
RD-RD-XX* Remote Dimmer for multiple-location installations
* “XX” in the model number represents color/finish code. See Colors and Finishes at end of document.
product specifications 09.25.15369968a
RadioRA 2 C ®• L® Hybrid Keypads
3Technical Support: 1.800.523.9466 (U.S.A)www.lutron.com
Specifications
Model Numbers Keypads: RRD-HN1RLD-XX, RRD-HN2RLD-XX, RRD-HN3BSRL-XX,
RRD-HN3S-XX, RRD-HN4S-XX, RRD-HN5BRL-XX, RRD-HN6BRL-XX
Engraved Replacement Button Kit: RKD-H1RLD-XX-E, RKD-H2RLD-XX-E,
RKD-H3BSRL-XX-E, RKD-H3S-XX-E, RKD-H4S-XX-E, RKD-H5BRL-XX-E,
RKD-H6BRL-XX-E
Remote Dimmer: RD-RD-XX
Power 120 V~ 50 / 60 Hz
Typical Power
Consumption
0.75 W
Test conditions: load is off, all backlights on medium intensity, two LEDs on
(two presets active), keypad powered at 120 V~
Regulatory Approvals UL, cUL, NOM, FCC, IC, COFETEL
Environment Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0% to 90%
humidity, non-condensing. Indoor use only.
Communications C•L Hybrid Keypads communicate with the system through Radio ®
Frequency (RF) and must be located within 30 ft (9 m) of a repeater.
Remote dimmers are not required to be within a specific range of a
repeater. System devices operate on frequencies between 431.0 MHz and
437.0 MHz.
ESD Protection Tested to withstand electrostatic discharge without damage or memory
loss, in accordance with IEC 61000-4-2.
Surge Protection Tested to withstand surge voltages without damage or loss of operation, in
accordance with IEEE C62.41-1991 Recommended Practice on Surge
Voltages in Low-Voltage AC Power Circuits.
Power Failure Power failure memory: should power be interrupted, the control will return
to its previous state when power is restored.
Mounting Requires a U.S. wallbox. 3
1⁄ in (89 mm) deep recommended, 221⁄4 in
(57mm) deep minimum. If mounting one control above another, leave at
least 41⁄ in (114 mm) vertical space between them.2
Multiple-Location
Wiring
Uses conventional 3-way and 4-way wiring. RD-RD dimmer needs to be
installed to control from another location.
Warranty www.lutron.com/TechnicalDocumentLibrary/Warranty.pdf
Design Features
• Keypad buttons are programmable to select
scene or room preset levels or positions.
• At the press of a keypad button, lights fade
ON or OFF to desired levels and shades/
draperies open or close to desired positions.
• Adjustable backlight intensity.
• Prepaid engraving included. Redeemable for
one engraved Replacement Button Kit.
• Internal dimmer is assigned to top button
by default. Tap top button to toggle load
ON / OFF.
• Internal dimmer can be assigned to any
button on the C•L Hybrid Keypad and can be ®
programmed to be controlled by any keypad.
• Designed for use with a wide variety of
approved LEDs. Refer to the LED Product
Selection Tool at www.lutron.com/ledtool
• Can be installed in either single location
or multiple-location (with Remote Dimmer)
installations.

Especificaciones del producto

Marca: Lutron
Categoría: Mando a distancia
Modelo: RRD-W3BRL

¿Necesitas ayuda?

Si necesitas ayuda con Lutron RRD-W3BRL haz una pregunta a continuación y otros usuarios te responderán


Mando a distancia Lutron Manuales

Lutron

Lutron Pico Manual de Usario

14 Septiembre 2024
Lutron

Lutron RRD-W3BRL Manual de Usario

11 Septiembre 2024

Mando a distancia Manuales

Últimos Mando a distancia Manuales

Monacor

Monacor DRM-880WP Manual de Usario

27 Octubre 2024
Hama

Hama Spot-Pointer V2 Manual de Usario

26 Octubre 2024
Sony

Sony RM-ED022 Manual de Usario

21 Octubre 2024
Sonos

Sonos Control Manual de Usario

18 Octubre 2024
One For All

One For All URC 7935 Manual de Usario

18 Octubre 2024
Canon

Canon BG-E20 Manual de Usario

12 Octubre 2024
Neewer

Neewer RT112 Manual de Usario

8 Octubre 2024
Neewer

Neewer RT113 Manual de Usario

8 Octubre 2024
Logitech

Logitech Harmony 785 Manual de Usario

8 Octubre 2024
DSC

DSC WS4949 Manual de Usario

8 Octubre 2024