Makita DLS713NZ Manual de Usario

Makita máquina de aserrar DLS713NZ

Lee a continuación 📖 el manual en español para Makita DLS713NZ (20 páginas) en la categoría máquina de aserrar. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/20
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
IMPORTANT: Read Before Using.
Cordless Slide Compound Miter Saw
DLS713
011234
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model DLS713
Blade diameter 190 mm
Blade body thickness 1.3 mm - 2.0 mm
Hole (arbor) diameter 20 mm
Max. Miter angle Left 47° , Right 57°
Max. Bevel angle Left 45°, Right 5°
Max. Cutting capacities (H x W) with blade 190 mm in diameter.
Bevel angle
Miter angle 45° (left) 0° 5° (right)
25 mm x 300 mm 52 mm x 300 mm 40 mm x 300 mm
0° -----
* 60 mm x 265 mm (Note 1)
-----
25 mm x 212 mm 52 mm x 212 mm -----
45° (left and right) -----
* 60 mm x 185 mm (Note 2)
-----
----- 52 mm x 163 mm -----
57° (right) -----
* 60 mm x 145 mm (Note 3)
-----
No load speed (min-1
) 2,200
Dimensions (L x W x H) 655 mm x 430 mm x 454 mm
Net weight 12.7 kg
Rated voltage D.C.18 V
(Note)
* mark indicates that a wood facing with the following thickness is used.
1: When using a wood facing 20 mm thickness
2: When using a wood facing 15 mm thickness
3: When using a wood facing 10 mm thickness
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END014-3
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ To avoid injury from flying debris, keep
holding the saw head down, after
making cuts, until the blade has come to
a complete stop.
･ When performing slide cut, first pull
carriage fully and press down handle,
then push carriage toward the guide
fence.
･ Do not place hand or fingers close to the
blade.
･ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
ENE076-1
Intended use
The tool is intended for accurate straight and miter
cutting in wood.
Cd
Ni-MH
Li-ion
3
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN61029:
Sound pressure level (L
pA) : 88 dB (A)
Sound power level (LWA) : 98 dB (A)
Uncertainty (K) : 3 dB (A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN61029:
Vibration emission (ah) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH003-13
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible manufacturer
declare that the following Makita machine(s):
Designation of Machine:
Cordless Slide Compound Miter Saw
Model No./ Type: DLS713
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN61029
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
8.3.2010
000230
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
ENA002-3
SAFETY INSTRUCTIONS
WARNING! When using battery operated tools basic
safety precautions, including the following, should be
followed to reduce the risk of fire, leaking batteries
and personal injury: Read these instructions before
operating this product and save these instructions.
For safe operations:
1. Keep work area clean.
Cluttered areas and benches invite injuries.
2. Consider the work environment.
Do not expose the tool to rain. Do not use power
tools in damp or wet locations. Keep work area
well lit. Do not use tools in the presence of
flammable liquids or gases.
3. Keep children away.
Do not let visitors touch the tool. Keep visitors
away from work area.
4. Store batteries or idle tools.
When not in use, tools and batteries should be
stored separately in a dry, high or locked up place,
out of reach of children.
Ensure that battery terminals cannot be shorted by
other metal parts such as screws, nails, etc.
5. Do not force the tool.
It will do the job better and safer at the rate for
which it was intended.
6. Use the right tool.
Do not force small tools or attachments to do the
job of a heavy duty tool. Do not use tools for
purposes not intended; for example, do not use
circular saws to cut tree limbs or logs.
7. Dress properly.
Do not wear loose clothing or jewellery, they can be
caught in moving parts. Rubber gloves and non-skid
footwear are recommended when working outdoors.
Wear protecting hair covering to contain long hair.
8. Use protective equipment.
Use safety glasses and hearing protection and if
the cutting operation is dusty, a face or dust mask.
9. Connect dust extraction equipment.
If devices are provided for the connection of dust
extraction and collection facilities ensure these are
connected and properly used.

Especificaciones del producto

Marca: Makita
Categoría: máquina de aserrar
Modelo: DLS713NZ

¿Necesitas ayuda?

Si necesitas ayuda con Makita DLS713NZ haz una pregunta a continuación y otros usuarios te responderán


máquina de aserrar Makita Manuales

Makita

Makita 5603 Manual de Usario

15 Octubre 2024
Makita

Makita DJV181Z Manual de Usario

12 Octubre 2024
Makita

Makita DUC353Z Manual de Usario

8 Octubre 2024
Makita

Makita JR001GD202 Manual de Usario

4 Octubre 2024
Makita

Makita EA3502S Manual de Usario

2 Octubre 2024
Makita

Makita DJV140 Manual de Usario

2 Octubre 2024
Makita

Makita DJV182RTJ Manual de Usario

30 Septiembre 2024
Makita

Makita HS301DWAE Manual de Usario

30 Septiembre 2024
Makita

Makita DSS500RFJ Manual de Usario

28 Septiembre 2024
Makita

Makita SP6000J Manual de Usario

24 Septiembre 2024

máquina de aserrar Manuales

Últimos máquina de aserrar Manuales

Hikoki

Hikoki C 6BU3 Manual de Usario

27 Octubre 2024
Dedra

Dedra DED7060 Manual de Usario

27 Octubre 2024
Einhell

Einhell KGS 190 Manual de Usario

27 Octubre 2024
Sun Joe

Sun Joe SWJ599E Manual de Usario

27 Octubre 2024
McCulloch

McCulloch CSE1935S Manual de Usario

27 Octubre 2024
Hikoki

Hikoki C10FSB Manual de Usario

27 Octubre 2024
Metabo

Metabo STA 18 LTX 150 BL Manual de Usario

26 Octubre 2024
Craftsman

Craftsman 917.377662 Manual de Usario

26 Octubre 2024
Maruyama

Maruyama MCV51 Manual de Usario

26 Octubre 2024
Powerplus

Powerplus POWX53300T Manual de Usario

22 Octubre 2024