Makita JR001GD202 Manual de Usario

Makita Zaagmachine JR001GD202

Lee a continuación 📖 el manual en español para Makita JR001GD202 (12 páginas) en la categoría Zaagmachine. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/12
INSTRUCTION MANUAL
Cordless Recipro Saw
JR001G
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: JR001G
Length of stroke 32 mm
Strokes per minute High (2) 0 - 3,000 min-1
Low (1) 0 - 2,300 min-1
Max. cutting capacities 130 mmPipe
Wood 255 mm
Rated voltage D.C. 36 V - 40 V max
Overall length with BL4025 457 mm
with BL4040 472 mm
Net weight 4.2 - 4.5 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsandbatterycartridgemaydierfromcountrytocountry.
• Theweightmaydierdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Batterycartridge BL4025 / BL4040
Charger DC40RA
• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof
residence.
WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges
andchargersmaycauseinjuryand/orre.
Symbols
Thefollowingsshowthesymbolswhichmaybeusedfortheequip-
ment.Besurethatyouunderstandtheirmeaningbeforeuse.
Read instruction manual.
Ni-MH
Li-ion
OnlyforEUcountries
Donotdisposeofelectricequipmentor
batterypacktogetherwithhouseholdwaste
material!
In observance of the European Directives,
on Waste Electric and Electronic
EquipmentandBatteriesandAccumulators
and Waste Batteries and Accumulators
and their implementation in accordance
withnationallaws,electricequipmentand
batteriesandbatterypack(s)thathave
reached the end of their life must be col-
lectedseparatelyandreturnedtoanenvi-
ronmentallycompatiblerecyclingfacility.
Intended use
The tool is intended for sawing wood, plastic and fer-
rous materials.
Noise
ThetypicalA-weightednoiseleveldeterminedaccord-
ing to EN62841-2-11:
Sound pressure level (LpA ) : 85 dB(A)
Sound power level (LWA) : 96 dB (A)
Uncertainty(K):3dB(A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
methodandmaybeusedforcomparingonetoolwith
another.
NOTE: The declared noise emission value(s)
mayalsobeusedinapreliminaryassessmentof
exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can dier from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-2-11:
Work mode: cutting boards
Vibration emission (a
h,B) : 18.0 m/s2
Uncertainty(K):1.5m/s
2
Work mode: cutting wooden beams
Vibration emission (a
h,WB) 19.5 m/s2
Uncertainty(K):2.0m/s
2
3 ENGLISH
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
andmaybeusedforcomparingonetoolwithanother.
NOTE:Thedeclaredvibrationtotalvalue(s)mayalso
beusedinapreliminaryassessmentofexposure.
WARNING:
The vibration emission during actual
use of the power tool can dier from the declared val-
ue(s) depending on the ways in which the tool is used
especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched oand when
it is running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
TheECdeclarationofconformityisincludedasAnnexA
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specications provided with this
power tool. Failure to follow all instructions listed below
mayresultinelectricshock,reand/orseriousinjury.
Save all warnings and instruc-
tions for future reference.
Theterm"powertool"inthewarningsreferstoyour
mains-operated(corded)powertoolorbattery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
whichmayignitethedustorfumes.
3.
Keep children and bystanders away while operating
a power tool.Distractionscancauseyoutolosecontrol.
Electrical safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodiedplugsandmatchingoutletswill
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tricshockifyourbodyisearthedorgrounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
7. Power tools can produce electromagnetic
elds (EMF) that are not harmful to the user.
However, users of pacemakers and other similar
medical devices should contact the maker of their
device and/or doctor for advice before operating
this power tool.
Personal safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or med-
ication. A moment of inattention while operating
powertoolsmayresultinseriouspersonalinjury.
2. Use personal protective equipment. Always
wear eye protection.Protectiveequipmentsuch
asadustmask,non-skidsafetyshoes,hardhator
hearing protection used for appropriate conditions
willreducepersonalinjuries.
3. Prevent unintentional starting. Ensure the
switch is in the o-position before connecting
to power source and/or battery pack, picking
up or carrying the tool.Carryingpowertoolswith
yourngerontheswitchorenergisingpowertools
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on.Awrenchorakeyleft
attachedtoarotatingpartofthepowertoolmay
resultinpersonalinjury.
5. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
6. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts.Looseclothes,jewelleryor
long hair can be caught in moving parts.
7. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
8. Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action
cancausesevereinjurywithinafractionofa
second.
9. Always wear protective goggles to protect
your eyes from injury when using power tools.
The goggles must comply with ANSI Z87.1 in
the USA, EN 166 in Europe, or AS/NZS 1336
in Australia/New Zealand. In Australia/New
Zealand, it is legally required to wear a face
shield to protect your face, too.

Especificaciones del producto

Marca: Makita
Categoría: Zaagmachine
Modelo: JR001GD202

¿Necesitas ayuda?

Si necesitas ayuda con Makita JR001GD202 haz una pregunta a continuación y otros usuarios te responderán


Zaagmachine Makita Manuales

Makita

Makita JR001GD202 Manual de Usario

4 Octubre 2024
Makita

Makita EA3502S Manual de Usario

2 Octubre 2024
Makita

Makita DJV140 Manual de Usario

2 Octubre 2024
Makita

Makita DJV182RTJ Manual de Usario

30 Septiembre 2024
Makita

Makita HS301DWAE Manual de Usario

30 Septiembre 2024
Makita

Makita DSS500RFJ Manual de Usario

28 Septiembre 2024
Makita

Makita SP6000J Manual de Usario

24 Septiembre 2024
Makita

Makita LH1040 Manual de Usario

21 Septiembre 2024
Makita

Makita DPB180RTE Manual de Usario

27 Agosto 2024
Makita

Makita 4350FCTK Manual de Usario

23 Agosto 2024

Zaagmachine Manuales

Últimos Zaagmachine Manuales

Festool

Festool PSC 420 EB Li 18-Plus Manual de Usario

3 Octubre 2024
Milwaukee

Milwaukee M12 JS-402B Manual de Usario

3 Octubre 2024
Gude

Gude UASA 12-201-24 Manual de Usario

3 Octubre 2024
Scheppach

Scheppach Deco-Fex Manual de Usario

3 Octubre 2024
DeWalt

DeWalt DWM120 Manual de Usario

2 Octubre 2024
Powerplus

Powerplus POWDPG7576 Manual de Usario

2 Octubre 2024
Porter-Cable

Porter-Cable PCE700 Manual de Usario

2 Octubre 2024
Spear & Jackson

Spear & Jackson CS4100-3 Manual de Usario

2 Octubre 2024
Powerplus

Powerplus POWX0562 Manual de Usario

2 Octubre 2024
Husqvarna

Husqvarna 550 XP G Manual de Usario

30 Septiembre 2024