Makita TM3000CX1J Manual de Usario
Makita
Multiherramienta
TM3000CX1J
Lee a continuación 📖 el manual en español para Makita TM3000CX1J (44 páginas) en la categoría Multiherramienta. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/44
1
GB Multi Tool INSTRUCTION MANUAL
S Multifunktionell maskin BRUKSANVISNING
N Flerfunksjonsverktøy BRUKSANVISNING
FIN Monitoimityökalu KÄYTTÖOHJE
LV Daudzfunkciju darbarīks LIETOŠANAS INSTRUKCIJA
LT Daugiafunkcis įrankis NAUDOJIMO INSTRUKCIJA
EE Universaalne tööriist KASUTUSJUHEND
RUS Универсальный Резак
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
TM3000C
2
1
1 012768
1
2 012852
1
3
2
3 012888
12
3
4 012851
1
2
3
4
5 012850 6 012889
7 012853
8 012855
3
ENGLISH (Original instructions)
Explanation of general view
1-1. Slide switch
2-1. Dial
3-1. Application tool installation bolt
3-2. Holes in the application tool
3-3. Protrusions of the tool flange
4-1. Application tool installation bolt
4-2. Hex wrench
4-3. Tighten
5-1. Application tool installation bolt
5-2. Holes in the application tool
5-3. Adapter
5-4. Protrusions of the tool flange
SPECIFICATIONS
Model TM3000C
Oscillation per minute 6,000 - 20,000 (min
-1)
Oscillation angle, left/right 1.6 ﾟ (3.2 ﾟ total)
Overall length 275 mm
without dust extraction attachment
1.4 kg
Net weight
with dust extraction attachment
1.5 kg
Safety class /II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
ENE080-1
Intended use
The tool is intended for sawing and cutting wood, plastic,
gypsum, non-ferrous metals, and fastening elements (e.
g. unhardened nails and staples). It is also intended for
working soft wall tiles, as well as dry sanding and
scraping of small surfaces. It is especially for working
close to edge and flush cutting.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Work mode: Sanding
Sound pressure level (L
pA) : 74 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Work mode: Cutting with plunge cut saw blade
Sound pressure level (L
pA) : 78 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Work mode: Cutting with segmental saw blade
Sound pressure level (L
pA) : 76 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Work mode: Scraping
Sound pressure level (L
pA) : 77 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: Sanding
Vibration emission (ah) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
Work mode: Cutting with plunge cut saw blade
Vibration emission (ah) : 6.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: Cutting with segmental saw blade
Vibration emission (ah) : 3.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: Scraping
Vibration emission (ah) : 5.5 m/s2
Uncertainty (K) : 1.5 m/s2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
Especificaciones del producto
| Marca: | Makita |
| Categoría: | Multiherramienta |
| Modelo: | TM3000CX1J |
¿Necesitas ayuda?
Si necesitas ayuda con Makita TM3000CX1J haz una pregunta a continuación y otros usuarios te responderán
Multiherramienta Makita Manuales
9 Octubre 2024
29 Septiembre 2024
17 Agosto 2024
12 Agosto 2024
9 Agosto 2024
8 Agosto 2024
6 Agosto 2024
2 Agosto 2024
27 Julio 2024
Multiherramienta Manuales
- Multiherramienta Bosch
- Multiherramienta AEG
- Multiherramienta DeWalt
- Multiherramienta Ferm
- Multiherramienta Ozito
- Multiherramienta Gude
- Multiherramienta Black And Decker
- Multiherramienta Vonroc
- Multiherramienta Skil
- Multiherramienta Hilti
- Multiherramienta Ryobi
- Multiherramienta Taurus
- Multiherramienta Metabo
- Multiherramienta Parkside
- Multiherramienta Worx
- Multiherramienta Milwaukee
- Multiherramienta Extech
- Multiherramienta Einhell
- Multiherramienta Baumr-AG
- Multiherramienta Powerplus
- Multiherramienta Stiga
- Multiherramienta Porter-Cable
- Multiherramienta Cotech
- Multiherramienta Powerfix
- Multiherramienta Bavaria
- Multiherramienta Lezyne
- Multiherramienta Toolcraft
- Multiherramienta Proxxon
- Multiherramienta Leatherman
- Multiherramienta Fein
- Multiherramienta Robust
- Multiherramienta Ergotools Pattfield
- Multiherramienta McKenzie
- Multiherramienta G-Technology
- Multiherramienta CMT Orange Tools
- Multiherramienta Donau Elektronik
Últimos Multiherramienta Manuales
27 Octubre 2024
21 Octubre 2024
15 Octubre 2024
14 Octubre 2024
8 Octubre 2024
8 Octubre 2024
4 Octubre 2024
22 Septiembre 2024
21 Septiembre 2024
18 Septiembre 2024