Maktec MT605 Manual de Usario

Maktec maquina de atornillar MT605

Lee a continuación 📖 el manual en español para Maktec MT605 (32 páginas) en la categoría maquina de atornillar. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/32

Drill Instruction Manual

Perceuse Manuel d’instructions

Bohrmaschine Betriebsanleitung

Trapano Istruzioni per l’uso

Boormachine Gebruiksaanwijzing

Taladro Manual de instrucciones

Furadeira Manual de instruções

Boremaskine Brugsanvisning

GR Τρυπάνι Οδηγίες χρήσεως

MT605

MT606

MT607

1 2

3 4

ENGLISH (Original instructions)

Explanation of general view

1 Switch trigger

2 Lock button

3 Reversing switch lever

4 Chuck key

5 Sleeve

6 Ring

SPECIFICATIONS

Model MT605 MT606 MT607

Capacities

Steel ........................................................................... 10 mm 10 mm 10 mm

Wood ......................................................................... 25 mm 25 mm 25 mm

No load speed (min–1) .................................................. 3,000 0 – 3,000 0 – 3,000

Overall length ............................................................... 229 mm 229 mm 234 mm

Net weight ..................................................................... 1.3 kg 1.3 kg 1.3 kg

Safety class ................................................................... /II /II /II

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

ENE032-1

Intended use

The tool is intended for drilling in wood, metal and plastic.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated and can, therefore, also be used from

sockets without earth wire.

GEA010-1

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for future refer-

ence.

GEB001-6

DRILL SAFETY WARNINGS

1. Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

2. Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring or its own

cord. Cutting accessory contacting a “live” wire may

make exposed metal parts of the power tool “live”

and could give the operator an electric shock.

3. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

4. Hold the tool firmly.

5. Keep hands away from rotating parts.

6. Do not leave the tool running. Operate the tool

only when hand-held.

7. Do not touch the drill bit or the workpiece imme-

diately after operation; they may be extremely

hot and could burn your skin.

8. Some material contains chemicals which may be

toxic. Take caution to prevent dust inhalation

and skin contact. Follow material supplier safety

data.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE or

failure to follow the safety rules stated in this instruc-

tion manual may cause serious personal injury.

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

Switch action (Fig. 1)

CAUTION:

• Before plugging in the tool, always check to see the

switch trigger actuates properly and returns to the

“OFF” position when released.

For MT605

To start the tool, simply pull the switch trigger. Release

the switch trigger to stop.

For continuous operation, pull the switch trigger and then

push in the lock button.

To stop the tool from the locked position, pull the switch

trigger fully, then release it.

For MT606, MT607

To start the tool, simply pull the switch trigger. Tool speed

is increased by increasing pressure on the switch trigger.

Release the switch trigger to stop.

For continuous operation, pull the switch trigger and then

push in the lock button.

To stop the tool from the locked position, pull the switch

trigger fully, then release it.

Especificaciones del producto

Marca:	Maktec
Categoría:	maquina de atornillar
Modelo:	MT605
Color del producto:	Zwart
Peso.:	8100 g
Ancho:	220 mm
Profundidad:	481 mm
Altura:	488 mm
Amable:	PC
factor vorm:	Midi Tower
Interruptor-encendido-/-apagado:	Ja
Adecuado para:	Gamen
Material:	Plastic, Steel, Tempered glass
Botón de reinicio:	Ja
Número de bahías de 2,5":	2
Número de bahías de 3,5":	2
Factores de forma de placa base compatibles:	ATX, Mini-ATX, Mini-ITX
Ventana lateral:	Ja
Placa(s) de vidrio templado:	Ja
Altura máxima del refrigerador de la CPU:	173 mm
Longitud máxima de la tarjeta gráfica:	395 mm
Longitud máxima de la fuente de alimentación:	200 mm
Número máximo de ventiladores frontales:	3
Diámetros de soporte de ventiladores frontales:	120,140 mm
Número máximo de fans en la cima.:	3
Diámetros de soporte de ventiladores superiores:	120,140 mm
Número máximo de ventiladores traseros:	1
Diámetros de soporte de ventiladores traseros:	120 mm
Ventiladores traseros instalados:	1x 120 mm
Número de ventiladores frontales instalados:	3x 140 mm
Número máximo de ventiladores laterales:	2
Diámetros de soporte de ventiladores laterales:	120 mm
Número máximo de ventiladores inferiores:	2
Diámetros de soporte de ventiladores inferiores:	120 mm