Maktec MT652 Manual de Usario

Maktec maquina de atornillar MT652

Lee a continuación 📖 el manual en español para Maktec MT652 (32 páginas) en la categoría maquina de atornillar. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/32
GB High Speed Drill Instruction Manual
F Perceuse à Haute Vitesse Manuel d’Instructions
DHochgeschwindigkeits-
Bohrmaschine Betriebsanleitung
I Trapano ad alta velocità Istruzioni d’Uso
NL Hoge-snelheid boormachine Gebruiksaanwijzing
E Taladro de Alta Velocidad Manual de Instrucciones
P Furadeira de Alta Velocidade Manual de Instruções
DK Hurtigløbende boremaskine Brugsanvisning
GR Τρυπάνι υψηλής ταχύτητας Οδηγίες χρήσεως
TR Yüksek Hızlı ı Matkap Kullanma k lavuzu
MT652
MT653
2
1 2
3
A
B
3
4
1
2
013476 013477
013475
3
ENGLISH (Original instructions)
Explanation of general view
1 Switch trigger
2 Lock button
3 Reversing switch lever
4 Chuck key
SPECIFICATIONS
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
ENE032-1
Intended use
The tool is intended for drilling in wood, metal and plastic.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
GEA010-1
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
GEB001-6
DRILL SAFETY WARNINGS
1. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
2. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a “live” wire may
make exposed metal parts of the power tool “live”
and could give the operator an electric shock.
3. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
4. Hold the tool firmly.
5. Keep hands away from rotating parts.
6. Do not leave the tool running. Operate the tool
only when hand-held.
7. Do not touch the drill bit or the workpiece imme-
diately after operation; they may be extremely
hot and could burn your skin.
8. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation
and skin contact. Follow material supplier safety
data.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this instruc-
tion manual may cause serious personal injury.
FUNCTIONAL DESCRIPTION
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action (Fig. 1)
CAUTION:
• Before plugging in the tool, always check to see the
switch trigger actuates properly and returns to the
“OFF” position when released.
• Switch can be locked in “ON” position for ease of oper-
ator comfort during extended use. Apply caution when
locking tool in “ON” position and maintain firm grasp on
tool.
For Model MT652
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop. For continuous operation, pull
the switch trigger, push in the lock button and then
release the switch trigger. To stop the tool from the
locked position, pull the switch trigger fully, then release
it.
Model MT652 MT653
Capacities
Steel 6.5 mm
Wood 9 mm
No load speed (min–1
) 4,500 0 – 4,500
Overall length 200 mm 203 mm
Net weight 0.92 kg 0.95 kg
Safety class /II

Especificaciones del producto

Marca: Maktec
Categoría: maquina de atornillar
Modelo: MT652

¿Necesitas ayuda?

Si necesitas ayuda con Maktec MT652 haz una pregunta a continuación y otros usuarios te responderán


maquina de atornillar Maktec Manuales

Maktec

Maktec MT653 Manual de Usario

11 Septiembre 2024
Maktec

Maktec MT690 Manual de Usario

11 Septiembre 2024
Maktec

Maktec MT071 Manual de Usario

11 Septiembre 2024
Maktec

Maktec MT606 Manual de Usario

11 Septiembre 2024
Maktec

Maktec MT621 Manual de Usario

11 Septiembre 2024
Maktec

Maktec MT652 Manual de Usario

11 Septiembre 2024
Maktec

Maktec MT605 Manual de Usario

11 Septiembre 2024

maquina de atornillar Manuales

Últimos maquina de atornillar Manuales

Bosch

Bosch GSB 12-2 Professional Manual de Usario

24 Octubre 2024
MSW

MSW -ACW700 Manual de Usario

20 Octubre 2024
Einhell

Einhell CC-IW 450 Manual de Usario

17 Octubre 2024
Metabo

Metabo SSW 650 Manual de Usario

17 Octubre 2024
Metabo

Metabo SSW 18 LT Manual de Usario

15 Octubre 2024
Makita

Makita DHP448 Manual de Usario

12 Octubre 2024
Black And Decker

Black And Decker HP9012 Manual de Usario

10 Octubre 2024
Milwaukee

Milwaukee 2769-20 Manual de Usario

7 Octubre 2024
Bosch

Bosch GSB 18V-65 Professional Manual de Usario

5 Octubre 2024
DeWalt

DeWalt DW132 Manual de Usario

5 Octubre 2024