Meliconi Facile TV.1 Manual de Usario

Meliconi Mando a distancia Facile TV.1

Lee a continuación 📖 el manual en español para Meliconi Facile TV.1 (6 páginas) en la categoría Mando a distancia. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/6
Facile TV.1
Thank you for choosing a Meliconi remote control.
The Facile remote control is designed to command a television. TV.1
Its ergonomic shape and soft rubber body make it easy to grip and protect it from shocks and drops.
By LEARN function, you can capture and store infrared signals from other remotes and match at will to one or more buttons.
It is also designed to be connected to the PC / TABLET / SMARTPHONE via MELICONI audiocable (included in the
package) in order to download the latest information to it activation. s
The MELICONI remote control reproduces infrared signals corresponding to the original; the functions that operate in radio
frequency (e.g. voice commands and pointers) are not supported.
The remote control has a permanent memory, so it does not lose its settings even if there are no batteries in it.
The remote control requires 2 new 1.5V alkaline batteries, not included in the AAA/LR03
package. Insert with the correct polarity as shown in gure.
DO NOT use batteries. rechargeable
BATTERIES TEST: Press and hold the 5 button and check that the LED remains on
continuously until the button is released. If the light is o or blinks, the inserted batteries are low,
therefore they need replacement.
Before using the remote control, for each device you wish to control, it is to set a it matched. essential specic code,
Identify the specic code and set it into the remote control using one of the following ways:
Use the -code on the side or connect to the page and follow the instructions. qr www.cme.it
Once you have found the specic code for your device, set it in the remote control as described in the
ENTERING THE CODE DIRECTLY chapter.
SMARTPHONE - TABLET - WEB
MANUAL
SEARCH
SMARTPHONE
TABLET - WEB
ACTIVATION OF REMOTE CONTROL
Do not leave exhausted batteries inserted, as liquid may leak and damage the remote control
INSERTING THE BATTERIES
SAFETY WARNINGS
The remote control and batteries should not be exposed to excessive heat such as sunlight, re
or the like.
The product . Keep out of reach of children or domestic animals. is not a toy
ATTENTION : searching for the suitable code could last up to 5 minutes.
• Stand in front of the device to be controlled and make sure it is ON (not in stand-by). If necessary, switch
it on using the original remote control (if this is still working) or the buttons present on the device itself. (on
TVs they can be on the side or the top)
• On the MELICONI remote control press and the butt until the LED of the remote control hold on
lights up; lease. re
• Pointing the remote control towards the device, PRESS AND HOLD button and wait the ON/OFF
(even up to 5 minutes) for the device to switch o.
• the device turn o IMMEDIATELY RELEASE the button. PAY ATTENTION, when ,
• Three nal ashes indicate that the operation has been completed successfully.
(only to be performed if you know the to be set) specic code
• On the MELICONI remote control press and hold the button until the LED lights up; release.
• Immediately enter the previously identied specic code.
• Three nal ashes indicate that the operation has been completed successfully.
For any future activation of the remote control, it is advisable to extract and note the code in use, operate as follows:
• On the MELICONI remote control press and hold the button until the LED lights up; release.
• Enter the code . 0010
• After a pause of several seconds, the LED produces four sets of ashes, spaced out,
corresponding to the code to be obtained. Count the number of ashes. Each set of ashes
corresponds to one digit in the code. Ten flashes correspond to the digit zero “0”.
( code obtained = example 1701)
• Make a note of the code obtained. You may need it in future.
DISPLAY CODE IN USE
If the remote control does NOT carry out the three nal ashes, the setting is NOT successful; repeat the procedure.
If still unsuccessful, it means that the code is not included in the remote control, contact the ASSISTANCE.
ENTERING THE CODE DIRECTLY
VERIFY
Check that the MELICONI remote control operates your device the main functions if it does not, the in ; REPEAT
procedure.
NOTE: When the list of codes to be searched is over, the remote control exits the search and the LED remains o.
If no results are obtained, try using the procedure described in the SMARTPHONE - TABLET - WEB chapter or contact
the ASSISTANCE.
MANUAL SEARCH
watch
the video
watch
the video
The functions of the buttons on the MELICONI remote control are only available if the original device is equipped with it.
Sometimes some functions of the original remote control are not directly present on the MELICONI remote control keypad.
To enable them, connect to the page, use the on-line tool ACTIVATION OF REMOTE CONTROL and continue www.cme.it
until you see the list matching buttons between the original remote control and the MELICONI remote control.
If the function you want to play is matched with an number i color operate as follows: n orange ,
• On the MELICONI remote control press and hold the button.
• When the LED turn on , point the remote control towards the device , without releasing the button
and enter the previously identied number corresponding to the function you want to get. (at the last digit
pressure, the remote control already transmits this function)
• Release the buttons; to match the function obtained to a MELICONI remote control button, within 30
seconds, press and hold the desired button.
• Wait three ashes indicate that storage; release the button. (the used button loses the original function
that will be called by setting again the activation code)
Connect the MELICONI remote control to a Personal Computer (Tablet / Smartphone) with Internet access through the
appropriate audio cable (included in the package) as shown in gure.
Operate as follows:
• Make sure the remote control is equipped with charged batteries.
• Connect the flat end of the cable to the three-pin connector in the battery compartment.
• Connect the jack of the cable to the audio / headphone output PC (green jack socket).
• On the website, use the ACTIVATION OF REMOTE CONTROL tool and follow www.cme.it
the instructions.
If you want to delete the function in combination with a single button, operate as follows:
• On the MELICONI remote control press and hold the button.
• When the LED turn on enter the code ; release the buttons. , without releasing the button, 1600
• Within 30 seconds, press and hold the button of which you want to delete the function; wait three ashes indicating the end
of the operation, release the button. (to recall the original function, setting again the activation code)
If necessary it is possible to reset the remote control and bring it back to the initial conditions. completely
WARNING user settings will be lost. Operate as follows: : All
• On the MELICONI remote control press and hold the button until the LED lights up; release.
• Enter the code . 0100
• Three nal ashes indicate that the operation has been completed successfully.
RESET THE REMOTE CONTROL
DELETE FUNCTION BY SINGLE BUTTON
SETTING VIA AUDIOCABLE
BUTTONS AND FUNCTIONS
watch
the video
watch
the video

Especificaciones del producto

Marca: Meliconi
Categoría: Mando a distancia
Modelo: Facile TV.1

¿Necesitas ayuda?

Si necesitas ayuda con Meliconi Facile TV.1 haz una pregunta a continuación y otros usuarios te responderán


Mando a distancia Meliconi Manuales

Meliconi

Meliconi gumbody light facile Manual de Usario

23 Septiembre 2024
Meliconi

Meliconi universal 4 Manual de Usario

22 Septiembre 2024
Meliconi

Meliconi Pratico 2 Manual de Usario

18 Septiembre 2024
Meliconi

Meliconi Personal 2 plus Manual de Usario

10 Septiembre 2024
Meliconi

Meliconi Speedy 2.1 Manual de Usario

2 Septiembre 2024
Meliconi

Meliconi GumBody Light Manual de Usario

2 Septiembre 2024
Meliconi

Meliconi Pratico 2.1 Manual de Usario

2 Septiembre 2024
Meliconi

Meliconi Gumbody Personal 7 plus Manual de Usario

1 Septiembre 2024
Meliconi

Meliconi Gumbody Personal 2 Manual de Usario

1 Septiembre 2024
Meliconi

Meliconi Control TV+ Manual de Usario

1 Septiembre 2024

Mando a distancia Manuales

Últimos Mando a distancia Manuales

Monacor

Monacor DRM-880WP Manual de Usario

27 Octubre 2024
Hama

Hama Spot-Pointer V2 Manual de Usario

26 Octubre 2024
Sony

Sony RM-ED022 Manual de Usario

21 Octubre 2024
Sonos

Sonos Control Manual de Usario

18 Octubre 2024
One For All

One For All URC 7935 Manual de Usario

18 Octubre 2024
Canon

Canon BG-E20 Manual de Usario

12 Octubre 2024
Neewer

Neewer RT112 Manual de Usario

8 Octubre 2024
Neewer

Neewer RT113 Manual de Usario

8 Octubre 2024
Logitech

Logitech Harmony 785 Manual de Usario

8 Octubre 2024
DSC

DSC WS4949 Manual de Usario

8 Octubre 2024