Meliconi universal 4 Manual de Usario

Meliconi Mando a distancia universal 4

Lee a continuación 📖 el manual en español para Meliconi universal 4 (6 páginas) en la categoría Mando a distancia. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/6

Thank you for choosing Meliconi.

This universal remote control is used for all the main functions of 4

TV - VCR - SAT - DVD remote controls of the makes listed at the back of the pack.

Keep your Instructions Booklet and Code Booklet for future reference.

TV VCR

Fastext Func.

–Record

Red Rewind

Green Stop

USING THE BUTTONS AND FUNCTIONS

DVD selection key

for a DVD unit or another

unit (Decoder, Pay-TV,

Video projector, Monitor, etc.).

This button lights up whenever

you use a DVD command.

ON/OFF button for

TV - VCR - SAT and DVD.

TV selection button for

using the TV. This button

lights up whenever you

use a TV command.

Teletext buttons:

to access Teletext

to close Teletext and

return to normal viewing

Teletext page hold function

additional Teletext

function.

Confirm button.

To select the next (P+) or

previous (P-) channel or

program. These buttons

can also be used to move

up and down in the MENU.

Mute button.

TV VCR

Fastext Func.

White/Violet

Additional Func.

Blue Fast forward

Yellow Pause

–Play

VCR selection button for

using the VCR.

This button lights up

whenever you use a VCR

command.

SAT selection button for

using the satellite receiver.

This button lights up

whenever you use a

receiver command.

Used to access additional

commands and to program

the remote control.

User customisation

buttons for memorising

and accessing additional

commands.

Number keys.

To access your MENU.

Move within the MENU

using the +/- and P +/-

keys or SHIFT

with +/- P +/- depending

on the model of your original

remote control.

Control the volume

using +/ -. These buttons

can also be used to move to

the right and left in the MENU.

To select an external terminal.

The functions described above are only operative

if your appliance also has them.

GB Use

SET-UP

Read these instructions

carefully before programming

your remote control!

MAKE SEARCH PROGRAMMING MODE

1.Turn ON the appliance:

– if a VCR, insert a cassette

– if SAT, select a program

– if DVD, insert a DVD.

2.In the code book enclosed, look for the

make of your appliance and make a

note of the code indicated at the side

(e.g. Philips 001) or the code for the

make indicated by the arrow.

3.Press and release the TV - VCR - SAT -

DVD selection button for the appliance

you want to use:

– the TV button is used to search only

for the TVs of the make selected

– the VCR button is used to search only

for the VCRs of the make selected

– the SAT button is used to search only

for the SATs of the make selected

– the DVD button is used to search only

for the DVDs of the make selected.

4.Hold down the SHIFT and ON/OFF

buttons together until the TV - VCR -

SAT - DVD selection buttons

start to flash indicating that the

remote control is programming.

5.Release the buttons. Within 15

seconds, enter the make code

previously identified (e.g. 001).

The TV- VCR - SAT -DVD selection

button flashes more quickly to indicate

that the remote control is ready for the

search.

6.Point the remote control at the

appliance. Press and release one of

the most frequently used keys several

times STOPPING when the appliance

responds correctly to the command.

7.When the appliance responds

correctly, press SHIFT to confirm.

Three flashes indicate that the

operation has been completed

correctly.

Identify and make a note of the code

for the appliance which you have

searched for following the code

noting procedure (see “NOTING THE

PROGRAMMED CODE” section).

Warning: program one appliance at a time.

SHIFT

FITTING THE BATTERIES

Before programming and using the remote control, fit the batteries.

The remote control requires 2 new AAA/LR03 alkaline batteries.

Insert the batteries as shown.

• The batteries must be changed once a year.

• If the TV - VCR - SAT - DVD/ selection buttons start

to flash during use, this indicates that the batteries

are low and should be changed.

• When you remove the batteries, fit the new ones

within 5 minutes or you may have to reprogram your

remote control.

•Make a note of the codes for the TV - VCR - SAT -

DVD equipment on the adhesive label inside the

battery cover. This note will be handy if you have to

reprogram your control.

DVD

SAT

VCR

NOTE: THE SELECTION BUTTON

STOPS FLASHING.

The remote control leaves the

programming mode and the

TV - VCR - SAT - DVD selection

button stops flashing:

•

if no buttons are pressed for 15 seconds

•

if an invalid make code is entered

•

if the code search list is completed. In

this case, go back to point 3 or switch to

programming mode C

•

if you press the TV - VCR - SAT - DVD -

F1 - F2 - F3 - F4 buttons by mistake.

To program the Universal 4 remote

control, follow the indications

in section A , Bor C.

Turn ON the appliance:

–if a VCR, insert a cassette

–if SAT, select a program

–if DVD, insert a DVD.

Press and release the TV - VCR - SAT -

DVD selection button for the

appliance you want to use:

– the TV button is used to search only

for the TVs of the make selected

– the VCR button is used to search only

for the VCRs of the make selected

– the SAT button is used to search only

for the SATs of the make selected

– the DVD button is used to search only

for the DVDs of the make selected.

Hold down the SHIFT and ON/OFF

buttons together until the TV - VCR -

SAT - DVD selection buttons start to

flash indicating that the remote control

is programming.

Release the buttons. Within 15

seconds, enter the code 000.

The TV- VCR - SAT -DVD selection

button flashes more quickly to indicate

that the remote control is ready for the

search.

Point the remote control at the

appliance. Press and release one of the

most frequently used keys several

times STOPPING when the appliance

responds correctly to the command.

Identify and make a note of the code

for the appliance which you have

searched for following the code

noting procedure (see “NOTING THE

PROGRAMMED CODE” section).

Turn ON the appliance:

–

if a VCR, insert a cassette

–

if SAT, select a program

–

if DVD, insert a DVD .

In the code book enclosed, look

for the make of the TV-VCR-SAT-DVD

appliance you want to control and

make a note of

the first code in the list BENEATH

the make previously identified

(e.g. Philips TV 103 - VCR 345, etc.).

Press and release the TV - VCR - SAT

- DVD selection button for the

appliance you want to use.

You cannot set a VCR code using the

TV button.

Hold down the SHIFT and ON/OFF

buttons together until the TV - VCR -

SAT - DVD selection buttons

start to flash indicating that the

remote control is programming.

Release the buttons, Within 15

seconds, enter the code previously

identified (e.g. TV 103). Three flashes

indicate that the code has been saved

correctly. If not, try the code entry

procedure again from point 3.

Note down the TV - VCR - SAT - DVD codes

used to program the remote control on the

adhesive label supplied;

stick the label to the inside of the

battery cover, for rapid consultation.

NOTE: THE SELECTION BUTTON STOPS

FLASHING.

The remote control leaves the

programming mode and the TV - VCR -

SAT - DVD selection button stops flashing

•if no buttons are pressed for 15 seconds

•if an invalid code is entered

•

if you press the TV - VCR - SAT - DVD

- F1 - F2 - F3 - F4 buttons by mistake.

DIRECT CODE ENTRY

Warning: program one appliance at a time.

SHIFT

GLOBAL SEARCH REMOTE CONTROL PROGRAMMING

This operation may take up to about 20 minutes.

Warning: program one appliance at a time.

SHIFT

Additional check

Point the remote control at the appliance.

Check that the appliance responds

correctly to the commands sent. If there

is no response or the appliance only

responds partially or incorrectly, it is

probable that you have used the wrong

code. In this case, try the procedure

again from point 3. This time,

however, use the NEXT CODE in the list

(e.g. 111 for TV - 348 for VCR, etc.).

NOTE : THE SELECTION BUTTON STOPS

FLASHING.

The remote control leaves the

programming mode and the TV - VCR -

SAT - DVD selection button stops flashing:

•if no buttons are pressed for 15 seconds

•if the code search list is completed.

•

if you press the TV - VCR - SAT - DVD-

F1 - F2 - F3 - F4 buttons by mistake.

When the appliance responds

correctly, press SHIFT to confirm.

Three flashes indicate that the

operation has been completed

correctly.

Additional check

Check that some of the other functions

used on your original remote control are

working correctly. If the commands

function incorrectly or erratically, you

have probably entered a code for a

similar but different remote control.

In this case, repeat the search procedure

from point 2.

DVD

SAT

VCR

DVD

SAT

VCR

Especificaciones del producto

Marca:	Meliconi
Categoría:	Mando a distancia
Modelo:	universal 4

¿Necesitas ayuda?

Si necesitas ayuda con Meliconi universal 4 haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

Mando a distancia Meliconi Manuales

Meliconi gumbody light facile Manual de Usario

23 Septiembre 2024

Meliconi universal 4 Manual de Usario

22 Septiembre 2024

Meliconi Pratico 2 Manual de Usario

18 Septiembre 2024

Meliconi Personal 2 plus Manual de Usario

10 Septiembre 2024

Meliconi Speedy 2.1 Manual de Usario

2 Septiembre 2024

Meliconi Gumbody Personal 7 plus Manual de Usario

1 Septiembre 2024

Meliconi Gumbody Personal 2 Manual de Usario

1 Septiembre 2024

Meliconi Gumbody Personal 5 plus Manual de Usario

29 Agosto 2024

Meliconi Gumbody Personal 4 plus Manual de Usario

29 Agosto 2024

Meliconi Gumbody UNIVERSAL 3-300 Manual de Usario

14 Agosto 2024

Mando a distancia Manuales

Últimos Mando a distancia Manuales

Monacor DRM-880WP Manual de Usario

27 Octubre 2024

Hama Spot-Pointer V2 Manual de Usario

26 Octubre 2024

Sony RM-ED022 Manual de Usario

21 Octubre 2024

Sonos Control Manual de Usario

18 Octubre 2024

One For All URC 7935 Manual de Usario

18 Octubre 2024

Canon BG-E20 Manual de Usario

12 Octubre 2024

Neewer RT112 Manual de Usario

8 Octubre 2024

Neewer RT113 Manual de Usario

8 Octubre 2024

Logitech Harmony 785 Manual de Usario

8 Octubre 2024

DSC WS4949 Manual de Usario

8 Octubre 2024