Meliconi Gumbody UNIVERSAL 3-300 Manual de Usario

Meliconi Mando a distancia Gumbody UNIVERSAL 3-300

Lee a continuación 📖 el manual en español para Meliconi Gumbody UNIVERSAL 3-300 (5 páginas) en la categoría Mando a distancia. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/5

U S I N G T H E K E Y S AN D FUN C T I O N S

The functions described below are only available

if they are already foreseen by your TV.

Keep this booklet in case you ever need to consult us in the future.

Thanks to the enclosed CD and to the on-line guide on the site www.meliconi.com/guide

it is even easier and faster to programme the remote control and discover

all the potential offered by the UNIVERSAL 3-300.

P R EPARE F O R US E

Read these instructions carefully before programming your remote control!

Thanks to its large database and numerous functions the remote control is ideal forUNIVERSAL 3-300

replacing up to 3 remote controls of any brands for TV - DVD/CR (

Video Recorder

) SAT/TER (

Digital Terrestrial

Its ergonomic form and casing in soft rubber make it easy to grip and protect it against falls and bumps.

Thank you for choosing a MELICONI remote control.

UNIVERSAL 3-300

Keys for selecting which appliance

you want to use.

They light up whenever a command

is sent to the selected appliance.

Teletext keys

ON/OFF key to turn the selected

appliance on and off

Keys that the user can customize

to memorize and access

additional commands

Confirm key

To move around within

the or to controlMENU

the BRIGHTNESS/COLOUR

VCR/DVD function keys:

RECORD - PAUSE STOP PLAY - -

or functionsfastext

Specific area for SET TOP BOX

To select the next ( ) orP+

previous (P-) channel or programme

Control the volume using +/–

MUTE

turns the volume on and off

FORWARD / REWIND

functions for VCR DVD and

Number keys

To select an external input terminal

1. Turn on the appliance to be programmed:

- if a , insert a cassetteVCR

- if a SAT TER or select a programme

- if a insert a DVD.DVD

2. Look in the Code Book for the brand of the appliance to

be programmed and make a note of the corresponding

code indicated alongside

(e.g. PHILIPS 0025)

3. Hold down the selection key for the appliance to be

programmed for 5 seconds.

4. When the key is released, it will start to flash. Enter the

brand code previously identified (

e.g. 0025

). The selection

key flashes more quickly to indicate that the remote control

is ready for the search.

5. Point the remote control at the appliance. Press and slowly

release the key or ON/OFF PLAY VCR DVD for the and

several times, when the appliance respondsstopping

correctly to the command.

6. When the appliance responds correctly, press toOK

confirm. Three flashes indicate that the search operation

has been completed correctly.

HOW TO PROGRAMME THE REMOTE CONTROL

FI T T I N G T H E B AT T ER I E S

Before programming and using the remote control,

fit the batteries.

The remote control requires 2 new batteries. Insert the batteries as shown:AAA/LR03

• Change the batteries if the light indicator starts to flash

during use. The batteries are low.

• Make a note of the codes for your appliances on the

adhesive label inside the battery cover in case you have

to reprogramme your remote control.

• This remote control has a permanent memory and does

not lose the programmed codes or functions when the

batteries are removed.

To display and make a note of the code memorized by means of the search,

follow the instructions described in the paragraph CURRENT CODE DISPLAY.

ADDITIONAL CHECK

Check that some of the other functions used on your original remote control are working correctly. If the

commands function incorrectly or erratically, you have probably entered a code for a similar remote control

but not the right one. In this case, repeat the search procedure starting from , entering the codepoint 3

previously used (e.g. 0025).

PHILIPS 0025

The - TV - DVD SAT keys can be programmed according to your

requirements, following the procedure described below.

The quickest and easiest way to programme the remote control is

by consulting enclosed CD or the website www.meliconi.com/guide.

Warning: programme one appliance at a time!

+ + +

5 SEC.

N.B. THE LIGHT INDICATOR STOPS FLASHING.

The remote control exits programming mode and the light indicator stops flashing:

• if no keys are pressed for 14 seconds

• if an invalid brand code is entered

• if a key other than or ON/OFF PLAY is accidentally pressed

• if the end of the code search list has been reached. In this case consult the enclosed CD or the site

www.meliconi.com/guide

GLOBAL SEARCH REMOTE CONTROL PROGRAMMING

The quickest and easiest way to programme the remote control is

by consulting enclosed CD or the website www.meliconi.com/guide.

Warning: programme one appliance at a time!

1. Turn on the appliance to be programmed:

- if a , insert a cassetteVCR

- if a SAT TER or select a programme

- if a insert a DVD.DVD

2. Hold down the selection key for the appliance to be

programmed for 5 seconds.

3. When the key is released, it will start to flash. Enter the

code 0000; the selection key flashes more quickly to

indicate that the remote control is ready for the search.

4. Point the remote control at the appliance. Press and slowly

release the ON/OFF key or PLAY VCR DVD for the and