Metra AXDSPL-HN3 Manual de Usario

Metra Convertidor de audio/video AXDSPL-HN3

Lee a continuación 📖 el manual en español para Metra AXDSPL-HN3 (16 páginas) en la categoría Convertidor de audio/video. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/16

AXDSPL-HN3

I N S T A L L A T I O N I N S T R U C T I O N S

Google Play Store Apple App Store

iOS 12.1 or higher

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip ties • Multimeter

TABLE OF CONTENTS

Connections ............................................................2

Installation .............................................................3

AXDSPL-BT Installation...........................................4

AXDSPL-SP Installation...........................................5

Mobile App ........................................................6-14

Speciﬁcations ........................................................15

Honda DSP Interface With Amp Bypass Harness

2016-Up

• Includes a DSP (Digital Signal Processor)

• 15 Band graphic EQ

• 4 inputs and 6 individually assignable outputs

• Independent equalization for front, rear, and sub

• Selectable low pass, band pass, and high pass ﬁlters

• Selectable crossover slopes; 12db, 24db, 36db, 48db

• Each channel can be delayed independently up to 10ms

• Clipping detection and limiting circuits

• Designed for ampliﬁed models

• Includes an amp bypass harness

• Internal header port for adding interface modules

• Retains level control of subwoofer through the factory radio

• Settings adjusted via Bluetooth® in a smart device application (tablet

or mobile phone), compatible with both Android and Apple devices

• Read, write, and store conﬁgurations for future recall

• Password protect feature available in the mobile app

• Micro-B USB updatable

• AXDSPL-HN3 interface

• AXDSPL-HN3 interface harness

• AXDSPL-HN3 amp bypass harness

APPLICATIONS

Visit axxessinterfaces.com for current application list

TBA

Blue/White - Amp Turn-On Wire

Any remaining wires

tape off and disregard

RCA Jacks

(sold separately)

Any remaining wires

tape off and disregard

White / Front Left Woofer +

White/Black / Front Left Woofer -

Gray / Front Right ofer +Wo

Gr /Blackay Front Right ofer -Wo

Green / Rear Left Woofer +

Green/Black / Rear Left Woofer -

Purple / Rear Right Woofer +

Purple/Black / Rear Right Woofer -

Br eown/Whit / Center +

Blue/Pink / Center -

Green/White / Su oofer +bw

White/Red / Su oofer -bw

TBA

An SPDT rela Metra part numbery,

E-123, is required if the amp turn-on

current of all amps exceeds 1-amp.

Yello Bluew/ / Front Left eeter +Tw

Yello Blackw/ / Front Left eeter -Tw

Yello dw/Re / Front Right +Tweeter

Yello Orangew/ Front Right -Tweeter

Green range/O / Rear Left Tweeter +

Green/Red / Rear Left Tweeter -

Black/Yellow / Rear Right eeter +Tw

Black/Green / Rear Right Tweeter -

Factory Amp

Passenger Side Kick Panel

(Remo Amp)ve

Interface

SPDIF interface

Amp Bypass Harness

CONNECTIONS

REV. 11/3/2020 INSTAXDSPL-HN3

INSTALLATION

1. Locate the factory amp in the passenger side kick panel. Unplug and remove the amp.

2. Install the AXDSPL-HN3 amp bypass harness to the vehicle and make all necessary

connections, but leave the amp turn-on wire disconnected.

3. AXDSPL-HN3 amp bypass harness AXDSPL-HN3 interface Connect the to the .

4. Connect the AXDSPL-HN3 interface harness AXDSPL-HN3 interfaces to the .

5. Download and install the AX-DSP-XL app Google Play Store Apple App Store from the or .

6. Cycle the ignition on.

7. Open the app then select the Bluetooth Connection tab. Follow the instructions to pair the

mobile device to the interface. Refer to page 7 for more information. (Figure A)

8. Conﬁguration Scroll to the tab then select the vehicle type. Press the Lock Down ‡ button to

save the conﬁguration. Refer to page 8 for more information. (Figure B)

9. Connect the amp turn-on wire.

10. Identify Click the button to conﬁrm the interface is connected properly. A chime will be heard

from the front left speaker. Test all functions of the installation for proper operation.

Note: The outputs may need to be conﬁgured within the tab.Outputs

11. Adjust the settings in the app as desired. Press the ‡ button to save any new Lock Down

conﬁgurations.

‡ Anytime the interface is locked down the key must be cycled off then back on

Note: The interface provides a 12-volt 1-amp output to turn on aftermarket amp(s). If installing

multiple amps, an SPDT automotive relay will be required if the amp turn-on current of all

amps combined exceeds 1-amp. Use Metra part number E-123 (sold separately) for best results.

(Figure A)

(Figure B)

Especificaciones del producto

Marca:	Metra
Categoría:	Convertidor de audio/video
Modelo:	AXDSPL-HN3

¿Necesitas ayuda?

Si necesitas ayuda con Metra AXDSPL-HN3 haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

Convertidor de audio/video Metra Manuales

Metra AXDSPL-VW1 Manual de Usario

30 Agosto 2024

Metra MPS-DSPL-BT Manual de Usario

30 Agosto 2024

Metra AXDSPL-HN3 Manual de Usario

29 Agosto 2024

Metra AXDSPX-GL44 Manual de Usario

29 Agosto 2024

Metra AX-DSPH-HN2 Manual de Usario

29 Agosto 2024

Convertidor de audio/video Manuales

Últimos Convertidor de audio/video Manuales

StarTech.com ST122VGA Manual de Usario

25 Octubre 2024

D-Link DMC-805X Manual de Usario

23 Octubre 2024

Trendnet TFC-GSFP Manual de Usario

22 Octubre 2024

Trendnet TFC-FSFP Manual de Usario

22 Octubre 2024

D-Link DMC-300M Manual de Usario

21 Octubre 2024

Tripp Lite P569-006-IND2 Manual de Usario

19 Octubre 2024

Abus TVAC20001 Manual de Usario

10 Octubre 2024

Cambridge DacMagic Manual de Usario

4 Octubre 2024

Konig KN-HDMICON26 Manual de Usario

2 Octubre 2024

LevelOne GVM-1101 Manual de Usario

30 Septiembre 2024