Metra MPS-DSPL-BT Manual de Usario

Metra Convertidor de audio/video MPS-DSPL-BT

Lee a continuación 📖 el manual en español para Metra MPS-DSPL-BT (16 páginas) en la categoría Convertidor de audio/video. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/16

MPS-DPSL-BT

I N S T A L L A T I O N I N S T R U C T I O N S

Google Play Store Apple App Store

iOS 12.1 or higher

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip ties • Multimeter

TABLE OF CONTENTS

Preface ....................................................................2

Installing bluetooth board ....................................3

Pinout .....................................................................4

Installation .............................................................5

Stand-alone bluetooth diagram ..........................6

Quick setup guide ..............................................7-12

Advanced DSP features & control options .....13-14

Other installation options ....................................15

Speciﬁcations ....................................................... 16

Marine & Powersports Bluetooth Streaming

Audio Interface w/ DSP Controls

No Source Needed.

• 15 Band graphic EQ

• Bluetooth streaming from your smart device

• 4 inputs and 6 outputs, including front, rear, and subwoofer

• Independent equalization for front, rear, and sub

• Independent crossover for front, rear, and sub

• Selectable slope (12, 24, 36, or 48db per octave)

• Front and rear channels can be delayed independently up to 10ms

• Water resistant enclosure with zip tie mounts included

• Clipping detection and limiting circuits

• Bluetooth interface module included

• Volume knob & Bass knob included

•

Settings adjusted via Bluetooth® in a smart device application (tablet

or mobile phone), compatible with both Android and Apple devices

• Read, write, and store conﬁgurations for future recall

• Password protect feature available in the mobile app

• Micro-B USB updatable

• MPS-DSPL-BT circuit board

• Bluetooth streaming audio circuit board

• Volume and Subwoofer knobs

• MPS-DPSL-BT harness (16-pin & 20-pin, with gaskets)

• MPS-DPSL-BT enclosure

• Case

• Cap (with O-ring)

PREFACE

The MPS-DSPL-BT is designed for UTV, Marine and Motorcycle applications when a source is not required. The interface includes the AXDSPL-BT Bluetooth Streaming circuit board. This

board plugs directly into the DSP’s circuit board and will allow your phone or tablet to stream music directly to your aftermarket ampliﬁers. The MPS-DSP-BT is housed in a water tight

case making it perfect for ON/OFF road vehicles that are exposed to the elements. We recommend matching the MPS-DSPL-BT with our MPS-RZKIT for 2014-2020 Polaris RZR.

The MPS-DSPL-BT provides 6 outputs that are assignable to match your systems requirements. Outputs are commonly assigned as Front, Rear, and Subwoofer, which are all setup

through the free Axxess AX-DSP-XL application. Included with interface are two separate knobs that are used as an overall system volume control and a subwoofer’s volume control.

The interface provides a 12-volt 1-amp output to turn on aftermarket amp(s). If installing multiple amps, an SPDT automotive relay will be required if the amp turn-on current of all

amps combined exceeds 1-amp. Use Metra part number E-123 (sold separately) for best results.

REV. 9/24/2020 INSTMPS-DPSL-BT

INSTALLING BLUETOOTH BOARD

16-Pin Header

AX-DSPL-BT

• The AXDSPL-BT Bluetooth interface will be used for adding a Bluetooth interface to the

MPS-DPSL-BT for playing music from your smart device.

• While playing music the volume can be controlled from your streaming device or from

the included volume knob.

1. Make sure the 16 pin and 20 pin plugs are disconnected from the Important!

circuit board before installing the ASDSPL-BT.

2. Locate the 16-pin header on the circuit board.

3. Important! Referencing how the Bluetooth interface is laid out in the picture,

carefully line up the header pins to the AXDSPL-BT Bluetooth interface. Gently

press down to secure.

Volume Knob Installation:

• Connect the Brown wire (Volume Control Wire) from the MPS-DPSL-BT harness, to the

Orange wire from the volume knob you want controlling the overall volume of your

system. The black wire from your volume control will need to be grounded. Tapping

into the ground wire from the MPS-DSPL-BT harness is recommended.

Subwoofer Knob installation

• Connect the Orange wire from the MPS-DSPL-BT Orange harness, to the wire from

the bass knob. The black wire from your volume control will need to be grounded.

Tapping into the ground wire from the MPS-DSPL-BT harness is recommended.

Especificaciones del producto

Marca:	Metra
Categoría:	Convertidor de audio/video
Modelo:	MPS-DSPL-BT

¿Necesitas ayuda?

Si necesitas ayuda con Metra MPS-DSPL-BT haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

Convertidor de audio/video Metra Manuales

Metra AXDSPL-VW1 Manual de Usario

30 Agosto 2024

Metra MPS-DSPL-BT Manual de Usario

30 Agosto 2024

Metra AXDSPL-HN3 Manual de Usario

29 Agosto 2024

Metra AXDSPX-GL44 Manual de Usario

29 Agosto 2024

Metra AX-DSPH-HN2 Manual de Usario

29 Agosto 2024

Convertidor de audio/video Manuales

Últimos Convertidor de audio/video Manuales

StarTech.com ST122VGA Manual de Usario

25 Octubre 2024

D-Link DMC-805X Manual de Usario

23 Octubre 2024

Trendnet TFC-GSFP Manual de Usario

22 Octubre 2024

Trendnet TFC-FSFP Manual de Usario

22 Octubre 2024

D-Link DMC-300M Manual de Usario

21 Octubre 2024

Tripp Lite P569-006-IND2 Manual de Usario

19 Octubre 2024

Abus TVAC20001 Manual de Usario

10 Octubre 2024

Cambridge DacMagic Manual de Usario

4 Octubre 2024

Konig KN-HDMICON26 Manual de Usario

2 Octubre 2024

LevelOne GVM-1101 Manual de Usario

30 Septiembre 2024