MILAB VIP-60 Manual de Usario

MILAB micrófono VIP-60

Lee a continuación 📖 el manual en español para MILAB VIP-60 (6 páginas) en la categoría micrófono. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/6
Milab VIP-60
Quick Guide Manual
Thank You for Choosing a Milab Microphone!
With a history that goes back to the 1930s, Milab is one of the oldest,
continuously operating microphone manufacturers in the world.
Every one of our microphones is handcrafted in our plant in southern Sweden.
Our quality control is meticulous and all microphones have to pass several
stages of testing, including rigorous audio tests in our anechoic chamber.
We believe in our products, which is why every microphone is delivered with
its own individual frequency chart and our industry-leading lifetime warranty.
Congratulations on your purchase and welcome to the Milab family!
Thomas Nöjdh, President
Package Includes
Milab VIP-60 condenser microphone
Rycote InVision USM shockmount
Individual frequency chart
Quick guide manual
The Milab VIP-60 Condenser Microphone
The VIP-60 is an upgrade of what is arguably the most iconic Milab model
ever produced, the VIP-50. While the VIP-60 boasts a new capsule, optimized
circuitry and a signi cant reduction in self-noise, fans of the predecessor will
still recognize the unique sound with its ribbon-like warmth, sparkly highs
and, of course, the extremely smooth o -axis response.
This is a microphone that has been designed to be the crown jewel of any stu-
dio, and it has the sparkly Nextel metallic  nish to prove it (but is also
available in black).
The VIP-60 o ers  ve di erent polar patterns and a selection of  lters and
pre-attenuation pads. It is delivered in an SKB 3i waterproof case with a Ryco-
te InVision USM shockmount. Factory matched pairs are available.
Connection
The VIP-60 can be connected to any mic input, mixer/ampli er, or mic
preamp using a standard microphone cable (XLR). The microphone is
designed for phantom powering at 48 V (P48, IEC 1938) with positive
voltage on the audio lines versus the cable shield.
Microphone XLR pinout:
1: Ground (shield)
2: Hot (+ phase)
3: Cold (- phase)
If the input device does not support phantom power, an external power supply
has to be connected between the microphone and the input. Make sure that the
extra phantom power has a DC-free output against the mixer, otherwise an RC
network has to be incorporated to block the 48 VDC.
Connecting the microphone to an unbalanced input:
Connecting the microphone to an unbalanced input without a transformer.
Pin 2 is the “hot phase“ and should be connected to the input. Pin 3 should
be left open:

Especificaciones del producto

Marca: MILAB
Categoría: micrófono
Modelo: VIP-60

¿Necesitas ayuda?

Si necesitas ayuda con MILAB VIP-60 haz una pregunta a continuación y otros usuarios te responderán




micrófono MILAB Manuales

MILAB

MILAB DC-96C Manual de Usario

15 Septiembre 2024
MILAB

MILAB VIP-60 Manual de Usario

15 Septiembre 2024
MILAB

MILAB DC-196 Manual de Usario

15 Septiembre 2024

micrófono Manuales

Últimos micrófono Manuales