Milwaukee 48-35-1311 Manual de Usario
Milwaukee
Pasamanos láser
48-35-1311
Lee a continuación 📖 el manual en español para Milwaukee 48-35-1311 (1 páginas) en la categoría Pasamanos láser. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/1
BULLETIN NO.
54-07-3545
SERVICE PARTS LIST
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 -------------- Steel Strap (16)
2 -------------- Magnet (8)
3 -------------- M3 x 7mm T10 FH Screw (8)
4 -------------- Friction Magnet (2)
5 44-26-0140 Right Magnet Assembly (4)
6 -------------- M3 x 16mm T10 PH ST Screw (1)
7 -------------- Back Plate (1)
8 31-10-0045 Back Plate Kit (1)
9 44-26-0135 Left Magnet Assembly (4)
CATALOG NO. 48-35-1311
REVISED BULLETIN
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
360 Laser Mount
STARTING
SERIAL NO.
DATE
Aug. 2020
WIRING INSTRUCTION
0
00
EXAMPLE:
Component Parts (Small #)
Are Included When Ordering
The Assembly (Large #).
6
1
(x16)
7
3
(x8)
4
(x2)
2
(x8)
84 6
7
51 2
3
91 2
3
MILWAUKEE TOOL l www.milwaukeetool.com
13135 W. Lisbon Road, Brookeld, Wisc. 53005
Drwg. 1
Inspect sticker applied to the face of the Magnet (2).
Inspect sticker applied to the face of the Magnet (2).
Inspect sticker applied to the face of the Magnet (2).
Inspect sticker applied to the face of the Magnet (2). Inspect sticker applied to the face of the Magnet (2).
Orient the Magnet and Steel Strap (1) so that the
Orient the Magnet and Steel Strap (1) so that the
Orient the Magnet and Steel Strap (1) so that the
Orient the Magnet and Steel Strap (1) so that the Orient the Magnet and Steel Strap (1) so that the
"N/S" faces in the upward direction relative to the
"N/S" faces in the upward direction relative to the
"N/S" faces in the upward direction relative to the
"N/S" faces in the upward direction relative to the "N/S" faces in the upward direction relative to the
tool. The left (L) is inserted into the left side of the
tool. The left (L) is inserted into the left side of the
tool. The left (L) is inserted into the left side of the
tool. The left (L) is inserted into the left side of the tool. The left (L) is inserted into the left side of the
bracket and the right (R) magnet is inserted into the
bracket and the right (R) magnet is inserted into the
bracket and the right (R) magnet is inserted into the
bracket and the right (R) magnet is inserted into the bracket and the right (R) magnet is inserted into the
right side. Insert the Magnet and Steel Strap into the
right side. Insert the Magnet and Steel Strap into the
right side. Insert the Magnet and Steel Strap into the
right side. Insert the Magnet and Steel Strap into the right side. Insert the Magnet and Steel Strap into the
mount so that the post aligns with the inner diameter
mount so that the post aligns with the inner diameter
mount so that the post aligns with the inner diameter
mount so that the post aligns with the inner diameter mount so that the post aligns with the inner diameter
on the magnet.
on the magnet.
on the magnet.
on the magnet. After the Magnet and Steel Strap is
After the Magnet and Steel Strap is
After the Magnet and Steel Strap is
After the Magnet and Steel Strap is on the magnet. After the Magnet and Steel Strap is
inserted into the mount, the sticker can be removed
inserted into the mount, the sticker can be removed
inserted into the mount, the sticker can be removed
inserted into the mount, the sticker can be removed inserted into the mount, the sticker can be removed
and the screws (4) can be hand tightened. Do not
and the screws (4) can be hand tightened. Do not
and the screws (4) can be hand tightened. Do not
and the screws (4) can be hand tightened. Do not and the screws (4) can be hand tightened. Do not
over tighten.
over tighten.
over tighten.
over tighten.over tighten.
2 additional sets of Left (L) Magnet
2 additional sets of Left (L) Magnet
2 additional sets of Left (L) Magnet
2 additional sets of Left (L) Magnet Assemblies (5)
Assemblies (5)
Assemblies (5)
Assemblies (5) 2 additional sets of Left (L) Magnet Assemblies (5)
and Right (R) Magnet assemblies (9) are located
and Right (R) Magnet assemblies (9) are located
and Right (R) Magnet assemblies (9) are located
and Right (R) Magnet assemblies (9) are located and Right (R) Magnet assemblies (9) are located
here.
here.
here.
here.here.
In order to remove the Back Plate (7), remove Screw
In order to remove the Back Plate (7), remove Screw
In order to remove the Back Plate (7), remove Screw
In order to remove the Back Plate (7), remove Screw In order to remove the Back Plate (7), remove Screw
(6). The screw will act like a stop so the back plate
(6). The screw will act like a stop so the back plate
(6). The screw will act like a stop so the back plate
(6). The screw will act like a stop so the back plate (6). The screw will act like a stop so the back plate
does not come o with misuse.
does not come o with misuse.
does not come o with misuse.
does not come o with misuse.does not come o with misuse.
**
Especificaciones del producto
| Marca: | Milwaukee |
| Categoría: | Pasamanos láser |
| Modelo: | 48-35-1311 |
¿Necesitas ayuda?
Si necesitas ayuda con Milwaukee 48-35-1311 haz una pregunta a continuación y otros usuarios te responderán
Pasamanos láser Milwaukee Manuales
13 Septiembre 2024
13 Septiembre 2024
20 Agosto 2024
Pasamanos láser Manuales
- Pasamanos láser Bosch
- Pasamanos láser DeWalt
- Pasamanos láser Ozito
- Pasamanos láser Leica
- Pasamanos láser Hilti
- Pasamanos láser Craftsman
- Pasamanos láser Fluke
- Pasamanos láser Stabila
- Pasamanos láser Laserliner
- Pasamanos láser Toolcraft
- Pasamanos láser Neo
- Pasamanos láser PLS
- Pasamanos láser Futech
- Pasamanos láser Alpha Tools
Últimos Pasamanos láser Manuales
23 Septiembre 2024
22 Septiembre 2024
17 Septiembre 2024
16 Septiembre 2024
15 Septiembre 2024
13 Septiembre 2024
13 Septiembre 2024
11 Septiembre 2024
10 Septiembre 2024
9 Septiembre 2024