Mini-Box picoPSU-160-XT Manual de Usario

Lee a continuación 📖 el manual en español para Mini-Box picoPSU-160-XT (5 páginas) en la categoría Fuente de alimentación de la computadora. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/5
picoPSU-160-XT
12V, 160Watt / 200watt peak ATX Power Supply
Quick Installation Guide
Version 1.0d
P/N picoPSU-160-XT
Mini-Box.com ATX DC-DC Converter Series
picoPSU-160-XT Quick Installation Guide Page 2
Introduction
Based on an improved electrical design of the picoPSU-90, the picoPSU-160-XT is
a small yet powerful and fully compliant ATX power supply designed to power a
wide variety of motherboards from a single 12V regulated power source. picoPSU-
160-XT has been optimized for the latest generation of power of Intel or AMD
processors resulting in the highest eciency at light loads while capable of peak
power requirements to an impressive array of peripherals.
picoPSU-160XT has a high performance 4mR Mosfet Switch for the 12V rail,
capable of handling large currents with peak currents up to 15A.
The PICOPSU-160-XT is the only snap power supply solution for general purpose
motherboards. Compatible with an entire range of mini-ITX motherboards the
picoPSU-160-XT provides cool, silent power for system. The PICOPSU-160-XT has
many advantages over a regular power supply:
-Smallest ATX PSU to date
-100% silent operation
-Low heat dissipation with eciency over 96%
-Plugs directly into the motherboard’s power connector, no cable mess
Mini-Box.com ATX DC-DC Converter Series
picoPSU-160-XT Quick Installation Guide Page 3
Quick installation Instructions
The PICOPSU-160-XT has been specically designed for the Mini-ITX form factor,
thus eliminating the need for ATX power cables. It is also 1U compliant – height will
not exceed 1U form factor.
1) After the picoPSU module was ‘snapped in’, connect the hard drive power or P4
power to your oppy/hard drives. If more hard drives or oppy connectors are
needed, use a HDD/oppy “Y” splitter cable.
PicoPSU-160-XT shown with the D510MO Intel Motherboard.
2) Connect a 12 VDC power adapter (or any 12V source) to the DC-to-DC
connector, center pin / white wire is positive (+).
3) Turn on the PC using the motherboard ON/OFF motherboard switch
Typical conguration
The picoPSU-160-XT has been tested with all mini-ITX board (VIA C3, VIA C7, low
power AMD and Intel Atom) under virtually any disk / oppy / CDROM
congurations. Additionally, the PICOPSU-160-XT can power low boards equipped
with an 12VATX 4 pin connector (additional cable required). NOTE: The hard drive
cable harness can be disconnected in case the user does not need any peripheral.
Additionally, the cable harness can be made to any length or output connector type
provided that the max load does not exceed 3A for GND return. Please look under
specications for the mating connector type.

Especificaciones del producto

Marca: Mini-Box
Categoría: Fuente de alimentación de la computadora
Modelo: picoPSU-160-XT

¿Necesitas ayuda?

Si necesitas ayuda con Mini-Box picoPSU-160-XT haz una pregunta a continuación y otros usuarios te responderán




Fuente de alimentación de la computadora Mini-Box Manuales

Fuente de alimentación de la computadora Manuales

Últimos Fuente de alimentación de la computadora Manuales