Mini-Box picoPSU-80-WI-32 Manual de Usario

Lee a continuación 📖 el manual en español para Mini-Box picoPSU-80-WI-32 (5 páginas) en la categoría Fuente de alimentación de la computadora. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/5
picoPSU-80-WI-32
12-32V, 80watt
ATX Power Supply
Quick Installation Guide
Version 1.0d
P/N picoPSU-80-WI-32
Mini-Box.com ATX DC-DC Converter Series
picoPSU-80-WI-32 Quick Installation Guide Page 2
Introduction
The picoPSU-80-WI-32 is a small yet powerful and fully compliant
ATX power supply designed to power a wide variety of
motherboard from a single 12-32V unregulated power source.
The picoPSU-80-WI-32 is the only “plug-in” wide input range power
supply solution for general purpose low power motherboards.
Compatible with most VIA CPUs M/B and with Atom, Pentium-
M / Core Duo boards picoPSU-80-WI-32, provides cool, 100%
silent power for your system. The PICOPSU-80-WI-32 has many
advantages over a regular power supply:
-Smallest ATX PSU to date
-100% silent operation
-Low heat dissipation with combined eciency over 93%
-Plugs directly into the motherboard’s power connector, no cable
mess
Mini-Box.com ATX DC-DC Converter Series
picoPSU-80-WI-32 Quick Installation Guide Page 3
Quick installation Instructions
The PICOPSU-80-WI-32 has been specically designed for the
Mini-ITX form factor, thus eliminating the need for ATX power
cables. It is also 1U compliant – height will not exceed the 1U
formfactor.
1) After the picoPSU module was ‘snapped in’, hook the
hard drive power or oppy power to your oppy/hard
drives. If more hard drives or oppy connectors are
needed, use a HDD/oppy “Y” splitter cable.
2) Connect a 12-32VDC power adapter (peak should not exceed
34V) to the input connector.
3) Turn on the PC using the motherboard ON/OFF switch
Typical conguration
The picoPSU-80-WI-32 has been tested with all mini-ITX board
under virtually any disk/oppy/CDROM/PCI conguration.
Removing the picoPSU-80-WI-32
In order to remove the picoPSU you must release the power
connector latch and then remove the unit. Gently lift the picoPSU
out from the ATX connector, by grabbing from the picoPSU PCB,
not from components or the wire harness.

Especificaciones del producto

Marca: Mini-Box
Categoría: Fuente de alimentación de la computadora
Modelo: picoPSU-80-WI-32

¿Necesitas ayuda?

Si necesitas ayuda con Mini-Box picoPSU-80-WI-32 haz una pregunta a continuación y otros usuarios te responderán




Fuente de alimentación de la computadora Mini-Box Manuales

Fuente de alimentación de la computadora Manuales

Últimos Fuente de alimentación de la computadora Manuales