Monacor PSIP-150/12 Manual de Usario

Monacor Cambiar PSIP-150/12

Lee a continuación 📖 el manual en español para Monacor PSIP-150/12 (5 páginas) en la categoría Cambiar. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/5

WITHSTAND VOLTAGE

ISOLATION RESISTANCE

I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH

℃

....

CONSTANT CURRENT REGION Note.4

CLG-150-12 A

A : IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer.

Blan ated. Cable for I/O connection. k : IP67 r

B : IP67 rated. Constant current level adjustable through output cable.

C : Terminal block for I/O connection. Output voltage and constant current level can be adjusted through internal

potentiometer.

THD< 20% when output loading 75% at 115VAC/230VAC input and output loading 75% at 277VAC input≧ ≧

TOTAL HARMONIC DISTORTION

MAX. No. of PSUs on 16A

CIRCUIT BREAKER 3 units (circuit breaker of type B) / 5 units (circuit breaker of type C) at 230VAC

SPECIFICATION

MODEL CLG-150-12 CLG-150-15 CLG-150-20 CLG-150-24 CLG-150-30 CLG-150-36 CLG-150-48

DC VOLTAGE

RATED CURRENT

RATED POWER

OUTPUT

VOLTAGE ADJ. RANGE Note.6

CURRENT ADJ. RANGE

LINE REGULATION

LOAD REGULATION

SETUP, RISE TIME

HOLD UP TIME (Typ.)

VOLTAGE RANGE Note.5

FREQUENCY RANGE

POWER FACTOR (Typ.)

EFFICIENCY (Typ.)

AC CURRENT (Typ.)

INPUT

INRUSH CURRENT(max.)

LEAKAGE CURRENT

SAFETY STANDARDS Note.7

WORKING TEMP.

WORKING HUMIDITY

STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

VIBRATION

MTBF

DIMENSIONOTHERS

NOTE

PACKING

OVER CURRENT (Typ.) Note.4

OVER VOLTAGE

OVER TEMPERATURE

12V

9 ~12V

15V

11.25 ~ 15V

20V

15 ~ 20V

24V

18 ~ 24V

30V

22.5 ~ 30V

36V

27 ~ 36V

48V

36 ~ 48V

11A 9.5A 7.5A 6.3A 5A 4.2A 3.2A

132W 142.5W 150W 151.2W 150W 151.2W 153.6W

150mVp-p 150mVp-p

13 ~ 17V

150mVp-p

17 ~ 22V

150mVp-p

22 ~ 27V

150mVp-p

26 ~ 32V

150mVp-p

31 ~ 41V

200mVp-p

40 ~ 56V

±2.0%

5.5 ~ 11A

±2.0%

4.75 ~ 9.5A

±2.0%

3.75 ~ 7.5A

±1.0%

3.15 ~ 6.3A

±1.0%

2.5 ~ 5A

±1.0%

2.1 ~ 4.2A

±1.0%

1.6 ~ 3.2A

9 ~ 13V

Can be adjusted by internalpotentiometer A type and C type only

± ± ± ± ± ± ±0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5%

± ± ± ± ± ± ±1.0% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5%

3000ms, 80ms/115VAC 500ms, 80ms/230VAC at full load

50ms / 230VAC 16ms / 115VAC at full load

90 ~ 295VAC 127 ~ 417VDC

47 ~ 63Hz

PF>0.98/115VAC, PF>0.95/230VAC, PF>0.93/277VAC at full load (Please refer to "Power Factor Characteristic" curve)

88% 88% 90% 90% 91% 91% 91%

13.5 ~ 17V 18 ~ 23V 23 ~ 28V 28 ~ 34V 33 ~ 39V 42 ~ 50V 59 ~ 70V

2A / 115VAC 1A / 230VAC 0.68A / 277VAC

COLD START 65A(twidth=595 s measured at 50% Ipeak) at 230VAC

<1mA / 240VAC

95 ~ 108%

Protection type : Constant current limiting, recovers automatically after fault condition is removed

Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV)

20 ~ 95% RH non-condensing

-40 ~ +80 , 10 ~ 95% RH

℃

± ℃ ℃

0.03%/ (0 ~ 50 )

10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

Ul8750, CSA C22.2 No. 250.0-08, UL1012, CAN/CSA-C22.2 No. 107.1-01, UL879, CSA C22.2 No.207-M89, EN61347-1, EN61347-2-13

independent(except for CLG-150 C type),UL60950-1, TUV EN60950-1, (for Blank & A type only)

GB19510.1,GB19510.14 ,

303.7K hrs min. MIL-HDBK-217F (25 )℃

222.2*68*38.8mm (L*W*H)(CLG-150-Blank/A/B) 229*68*38.8mm (L*W*H)(CLG-150-C)

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.℃

2. Rippl noise are measured at 20MHz of bandwidth by usine & g a 12" twisted pair-wire terminated wit 0.1u 47uf parallel capacitor.h a f &

3. Toleranc includes set up tolerance, line regulation and load regulation.e :

Please refer to "DRIVING METHODS OF LED MODULE".

5. Derating may be needed under low input voltages. Please check the for more details. static characteristics

6. A type and C type only.

7. Safety and EMC design refer to EN60598-1, subject 8750(UL), CNS15233, GB7000.1, FCC part18.

8. The power supply is considered a omponent that will be operated in combination with final equipment. Since EMC performance will be affected by the s a c

complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

9. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently

connected to the mains.

1.0Kg; 12pcs/13Kg/0.58CUFT(CLG-150-Blank/A/B) 1Kg; 12pcs/13Kg/0.96CUFT(CLG-150-C)

Protection type : Shut down and latch off o/p voltage, re-power on to recover

150W Single Output Switching Power Supply

Universal AC inpu range (up to 295VAC)t / Full

Built-in active PFC function

High efficiency up to 91%

Protections: Short circui urren oltag emperature t / Over c t / Over v e / Over t

Cooling by free air convection

OCP point adjustable through output cable or internal potentiometer

IP65 / IP67 design for indoor or outdoor installations

Suitable for LED lighting and moving sign applications

Compliance to worldwide safety regulations for lighting

3 years warranty

■ Features :

C L G - 1 50 se ri es

RIPPLE & NOISE (max.)

Note.2

VOLTAGE TOLERANCE Note.3

ENVIRONMENT

SAFETY &

EMC

PROTECTION

Shut down o/p voltage, re-power on to recover

-30 ~ +70℃(Refer to "Derating Curve")

110

SELV

IP65 IP67

SHORT CIRCUIT

Hiccup mode, recovers automatically after fault condition is removed

Compliance to EN55015, EN55032 Class B, EN61000-3-2 Class C ( 75% load) ; EN61000-3-3≧

,GB17743 and GB17625.1

EMC IMMUNITY

EMC EMISSION

File Name:CLG-150-SPEC 2017-06-30

( for BLANK&A type only)

IP65 or IP67, J61347-1, J61347-2-13(except for CLG-150 C type) approved

Mechanical Specification

File Name:CLG-150-SPEC 2017-06-30

Case No. 954A Unit:mm

Blank:(CLG-150)

※IP67 rated. Cable for I/O connection.

300 20±

FG (Green/Yellow)

38.8

222.2

198.2

AC/L(Brown)

AC/N(Blue)

9.6

9.49.4 34.2

ψ ×4.2 4PL

300 20±

99.1

T case

※T case: Max. Case Temperature.

150W Single Output Switching Power Supply C L G-1 5 0 se r i e s

A Type:(CLG-150-_A)

※IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer.

(Can access by removing the rubber stopper on the case.)

300 20±

FG (Green/Yellow)

38.8

222.2

198.2

AC/L(Brown)

AC/N(Blue)

9.6

9.49.4 34.2

ψ ×4.2 4PL

Io ADJ.

Vo ADJ.

300 20±

SJOW 17AWG H05RN-F 1.0mm 3C& ×²

SJOW 17AWG H05RN-F 1.0mm 2C(for others)& ×²

SJOW 14AWG 2C(for CLG-150-12)×

-V(Blue)

(Black for 12V)

(Red for 12V)

+V(Brown)

SJOW 17AWG H05RN-F 1.0mm 3C& ×²

SJOW 17AWG H05RN-F 1.0mm 2C(for others)& ×²

SJOW 14AWG 2C(for CLG-150-12)×

-V(Blue)

(Black for 12V)

(Red for 12V)

+V(Brown)

AC Input Terminal Pin No.

Assignment

DC Output Terminal Pin No.

Assignment

Pin No.

Assignment

AC/N

-V

AC/L

B Type:(CLG-150-_B)

※IP67 rated. Output constant current level can be adjusted through output cable by connecting a resistor between ADJ1 and ADJ2.

※Reference resistance value for output current adjustment (Typical)

Resistance

Open

4.7KΩ

620Ω

82Ω

Short

Percentage of rated current

Slightly > 100%

100%

75%

50%

Slightly < 50%

300 20±

FG (Green/Yellow)

SJTW 14AWG 2C×

SJTW 18AWG 2C×

38.8

SJTW 18AWG 3C×

222.2

198.2

AC/L(Brown)

AC/N(Blue)

9.6

9.49.4 34.2

ψ ×4.2 4PL

300 20±

+V(Red)

ADJ1(Blue)

-V(Black)

ADJ2(White)

C Type:(CLG-150-_C)

※Output voltage and constant current level can be adjusted through internal potentiometer.

(Can access by removing the rubber stopper on the case.)

ψ ×4.2 4PL

38.8

7.5 9.5

I/P

15.4

198.2

229

2O/P

Io ADJ.

Vo ADJ.

99.1

T case

※T case: Max. Case Temperature.

File Name:CLG-150-SPEC 2017-06-30

150W Single Output Switching Power Supply C L G-1 5 0 se r i e s

Especificaciones del producto

Marca:	Monacor
Categoría:	Cambiar
Modelo:	PSIP-150/12
Peso.:	23200 g
Nivel de ruido:	46 dB
Dimensiones del paquete (AnxPrxAl):	570 x 617 x 262 mm
Potencia de salida:	1350 W
Batería/Tiempo de carga de la batería:	3 uur
Temperatura de almacenamiento:	-15 - 50 °C
Frecuencia:	40/70 Hz
Sistemas operativos compatibles:	Windows 2000/XP/Vista
Seguridad:	EC/EN/AS 62040-1-1:2008
Altura operativa:	0 - 3000 m
Dimensiones (Ancho x Fondo x Alto):	430 x 497 x 85 mm
Temperatura de funcionamiento (TT):	0 - 40 °C
Humedad relativa de funcionamiento (VV):	0 - 95 procent
Tecnología de batería:	Sealed Lead Acid (VRLA)
Tensión de entrada nominal:	230 V
Capacidad de potencia de salida:	1.5 kVA