Monoprice 111178 Manual de Usario

Lee a continuación 📖 el manual en español para Monoprice 111178 (5 páginas) en la categoría Auriculares. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/5
SAFETY WARNINGS AND GUIDELINES
Do not expose this device to water or moisture of any kind. If this device gets
wet, turn it off immediately and do not attempt to use it again until it is thoroughly
dried, inside and out.
Do not disassemble or attempt to repair or modify this unit.
Do not use this device while operating a motor vehicle, heavy equipment, walking
in traffic, or any other situation in which situational awareness is a key to safety.
Clean only using a soft, dry cloth. For stubborn dirt, slightly moisten the cloth with
warm water.
This device contains a rechargeable battery and electronic circuits. It should only
be disposed of in accordance with local laws and regulations.
PRODUCT OVERVIEW
1. Headband
2. Headband adjustment
3. on Previous track butt
4. Micro USB charging port
5. -Multi Function button
6. Next track button
7. Microphone
8. Earpieces
9. Power switch
10. Volume down/- button
11. Volume up/+ button
OPERATION
Charging
Perform the following steps to charge built in rechargeable battery prior to use and -
whenever the battery level is low:
Ensure that the headphones are powered OFF.
Plug one end of the included USB cable into the charging port on the
headphones and the other end into a USB power source, such as a computer,
wall charger, backup battery pack, etc.
-Depending on the current level of your USB power source, it can 2 3 hours to
fully charge the during charging.headphones red. The LED indicator will glow
. When charging is complete the LED indicator will glow blue
Power
Power ON the headphones by sliding the Power Switch (9) until a beep sounds
in the earpieces and the LED indicator begins flashing blue.
Power OFF the headphones by sliding the Power Switch (9) until a beep sounds
in the earpieces and the LED indicator flashes blue twice.
Blueto oth Pairing
1. Ensure that both the headphones and your phone are powered ON.
2. Ensure that the headphones and the phone are within about 3 feet of each other.
3. Press and hold the Multi Function button (5) on the headsets until the LED -
indicator glows blue steadily.
4. Ensure that the Bluetooth feature on your phone is enabled. Perform a search for
Bluetooth devices and select the headphones from the list.
5. If asked for a passkey, enter 0000.
6. If pairing is successful, the LED indicator will rapidly flash blue 10 times, then will
flash once every 3 seconds.
7. If pairing is unsuccessful, the LED indicator will remain steady blue.
8. If no Bluetooth connection is established within about 60 seconds, the Bluetooth
pairing mode will turn off n off, as well.and the LED indicator will tur

Especificaciones del producto

Marca: Monoprice
Categoría: Auriculares
Modelo: 111178

¿Necesitas ayuda?

Si necesitas ayuda con Monoprice 111178 haz una pregunta a continuación y otros usuarios te responderán




Auriculares Monoprice Manuales

Auriculares Manuales

Últimos Auriculares Manuales