Monoprice Delta Pro Manual de Usario
Monoprice
Impresora 3D
Delta Pro
Lee a continuación 📖 el manual en español para Monoprice Delta Pro (2 páginas) en la categoría Impresora 3D. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/2
Monoprice Delta Pro 3D Printer
Quick-start Guide
UNPACKING AND PRINTER SETUP
1
AUTO-LEVELING
2
LIMITED WARRANTIES AND LIMITATION OF LIABILITY
4
SAFETY NOTICE
7
REGULARTORY COMPLIANCE
6
TECHNICAL SUPPORT
5
FIRST PRINT
3
Perform the following steps to prepare the printer for use.
Remove the printer from its packaging and place it on a flat, stable surface
with plenty of ventilation and a nearby AC power outlet.
1.
Attach the Effector and Control Arms.2.
Plug in and power on.3.
Monoprice is pleased to provide free, live, online technical support to assist you
with any questions you may have about installation, setup, troubleshooting, or
product recommendations. If you ever need assistance with your new product,
please come online to talk to one of our friendly and knowledgeable Tech
Support Associates. Technical support is available through the online chat
button on our website www.monoprice.com during regular business hours, 7
days a week. You can also get assistance through email by sending a message
to tech@monoprice.com
CAUTION: This FCC Part 15 radio device operates on a non-interference basis
with other devices operating at this frequency. Any changes or modification to
said product not expressly approved by Monoprice, including the use of non-ap-
proved antennas, could void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Notice for FCC
Radio Notice for FCC
Do not use this product near water, for example, in a wet basement or near
swimming pool or in an area where accidentenal contact with water or liquid
might occurs.
Avoid using this product during an electrical storm. There may be a remote
risk of electric shock from the surge casued by lightning.
The external power adapter or AC power cord is the equipment's disconnec-
tion device. The power outlet must be located nearby the equipment and its
access must be easy.
Use this product in a well ventilated area.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Monoprice warranties sometimes vary by product, and all product-specific warranties are found on
product ID pages and within Monoprice's website. Subject to this limitation, in general, Monoprice
warrants (a) cables for life, and (b) that all other products will be free from defects in workmanship and
material for one year following delivery date, with certain exceptions. You must review product ID
pages carefully for warranty information. After 30 days of delivery and during the warranty period,
Monoprice will, without cost to you, at Monoprice’s option, either (i) repair defective products; (ii)
furnish replacement products; or (iii) grant you credit equal to the defective products' net purchase
price. Defective conditions in the products caused by third parties, acts of God, defective installation,
other trades, abnormal use or stress, or other matters unrelated to Monoprice’s activities are specifi-
cally excluded from the coverage of this warranty. You also hereby agree to be bound by Monoprice's
return and replacement policies. THE SITE AND SERVICES AND ALL PRODUCTS ARE MADE
AVAILABLE TO YOU ON AN "AS IS" AND "AS AVAILABLE" BASIS, UNLESS OTHERWISE SPECI-
FIED IN WRITING. THE FOREGOING WARRANTIES ARE EXCLUSIVE AND ARE GIVEN AND
ACCEPTED IN LIEU OF ANY AND ALL OTHER WARRANTIES EXPRESS OR IMPLIED. TO THE
FULL EXTENT PERMISSIBLE BY APPLICABLE LAW, MONOPRICE DISCLAIMS ALL WARRAN-
TIES EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY,
NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE, AND ALL OTHER REME-
DIES. THE REMEDIES DESCRIBED IN THIS SECTION 6 ARE YOUR ONLY REMEDIES FOR ANY
BREACH OF WARRANTY OR ANY OTHER CLAIM. MONOPRICE’S TOTAL LIABILITY ARISING
OUT OF THE SITE, SERVICES, PRODUCTS, OR THE USE OF THE PRODUCTS, WHETHER ON
WARRANTIES OR CLAIM OF NEGLIGENCE, OR OTHERWISE, SHALL NOT IN ANY CASE
EXCEED THE COST PAID FOR THE DEFECTIVE PRODUCT OR 50 DOLLARS, WHICHEVER IS
LESS, AND MONOPRICE SHALL NOT BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY
INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES.
Address
11701 6th Street
Rancho Cucamonga, CA 91730, USA
Customer Service
support@monoprice.com
tech@monoprice.com
Legal
legal@monoprice.com
Call Us
Tel: 877.271.2592 Fax: 909.989.0078
Confirm that the hotend is
at room temperature, and
that the target tempertature
is at 0C before proceeding
to step 2. Tapping the hotend
icon toggles between preheat-
ing and cooling down.
Remove the Auto-level
Sensor.
1.
Install the Auto-level Sensor and connect the wire.2.
Tap the control icon and then
tap the leveling icon.
3.
Run “Auto-leveling.”4.
Return to the main menu,
tap on the control icon, and
tap on the preheat icon.
Then tap “PLA Preheat.”
2.
Return to the control menu,
tap on the filament icon
and then tap “Load.”
3.
5.
Place a sheet of copy paper
onto the Glass Print Bed, then
tap the middle crosshairs to
adjust the Z-offset.
6.
Adjust the height of the nozzle
so that the paper rubs gently
against the nozzle.
7.
Thread the filament as illustrated.
1.
Increase the offset
Decrease the offset
Green Wire
from Effector
Wire Assembly
Auto-level
Sensor Wire
Fan faces forward.
Load the filament to a point
within the circle as indicated
above.
The Filament
Sensor may be
hung from its holder
when not in use.
Return to the main menu to
start a print.
4.
Choose your file.5.
Start printing.6.
Tap the control icon for
advanced settings.
7.
Especificaciones del producto
| Marca: | Monoprice |
| Categoría: | Impresora 3D |
| Modelo: | Delta Pro |
¿Necesitas ayuda?
Si necesitas ayuda con Monoprice Delta Pro haz una pregunta a continuación y otros usuarios te responderán
Impresora 3D Monoprice Manuales
30 Agosto 2024
Monoprice Joule 3D Printer DIY Assembly Kit Manual de Usario
30 Agosto 2024Impresora 3D Manuales
- Impresora 3D Anker
- Impresora 3D Kodak
- Impresora 3D BQ
- Impresora 3D Flashforge
- Impresora 3D XYZprinting
- Impresora 3D MakerBot
- Impresora 3D Leap Frog
- Impresora 3D Anycubic
- Impresora 3D Easy Threed
- Impresora 3D LulzBot
- Impresora 3D Wasp
- Impresora 3D 3D Systems
- Impresora 3D Creality
- Impresora 3D Raise3D
- Impresora 3D Craftbot
Últimos Impresora 3D Manuales
27 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
16 Septiembre 2024
16 Septiembre 2024
16 Septiembre 2024
14 Septiembre 2024
14 Septiembre 2024
14 Septiembre 2024
14 Septiembre 2024