Muse M-103 IP Manual de Usario

Muse Vocero M-103 IP

Lee a continuación 📖 el manual en español para Muse M-103 IP (2 páginas) en la categoría Vocero. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/2
To check the alarm settings
In OFF mode, press ALM. 1/M- (9) or ALM. 2/M+ (10) button. Time and alarm source of
the corresponding alarm are displayed for 5 seconds.
Turning off Alarm
The alarm is programmed to run for 59 minutes and triggers progressively.
Once the alarm 1 or alarm 2 is activated, corresponding alarm indicator “ ” / “ ”,
“ ”/” ” or “ ” / “ ” will flash on display,
1. In wake up mode, to temporarily stop alarm, press the SNOOZE/DIM button (7). The
alarm will resume to the previous playing mode after 9 minutes. “ ” / “ ”, “ ”/” ”
or “ ” / “ ” and “SNOOZE” are on display.
2. To stop the alarm for 24 hours, press ON/OFF button (1), “ ” / “ ”, “ ”/” ”
or “ ” / “ ” remains displayed. The alarm will trigger at the preset time one day later.
3. To turn off the alarm permanently, in OFF mode, press and hold ALM. 1/M- (9) or ALM.
2/M+ (10) until “ ” / “ ”, “ ”/” ” or “ ” / “ ” disappears.
NOTE:
- You can adjust the wake up sound level by VOL+/- button on wake to iPhone/iPod or
radio modes your last setting.
- But since this is a progressive alarm, the sound will be louder and louder. You could
decrease the volume after the alarm reaches to its max volume level (24).
In OFF mode, press ALM. 1/M- (9) or ALM. 2/M+ (10) button, alarm type will flash on
display. Press (11) or (12) button to select to wake up by buzzer, iPhone/iPod,
or radio. The icon “ ”/“ ”, “ ”/” ” or “ ”/ “ ” will show on display
accordingly.
- “ ” or “ ” (wake up by buzzer): “Beep“ sound comes when the alarm time is
reached.
- “ ” or ” ” (wake up by iPod): Follow the procedure in “PLAY YOUR DOCKABLE
iPhone/iPod”. The iPhone/iPod will start playing automatically when the alarm time is
reached and the unit is off.
- “ ” or “ ” (wake up by radio): Follow the procedure in “LISTENING TO THE
RADIO” to select your desired radio station. The radio will turn on automatically when
the alarm time is reached and the unit is off.
Press ALM. 1/M- (9) or ALM. 2/M+ (10) button again, the hour digit flashes on display.
Press the (11) or (12) button to adjust the hour.
Press ALM. 1/M- (9) or ALM. 2/M+ (10) button again, the minute digit flashes on
display. Press the (11) or (12) button to adjust the minutes.
Press ALM. 1/M- (9) or ALM. 2/M+ (10) to save the setting of alarm 1 or alarm 2. The
display will resume to the current time.
This unit can be set for two different wake up times which you can choose to use inde-
pendently or simultaneously ALARM1, ALARM2 or both ALARM1 and ALARM 2.
Alarm 1 or Alarm 2 setting
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
ON/OFF button
VOL + / - buttons
EQ button (equalizer)
MEMO./SET button (memory/clock
setting)
FUNCTION button
iPhone/iPod Socket
SNOOZE/DIM button
SLEEP Button
ALM. 1/M- button
ALM. 2/ M+ button
button
button
button (play/pause)
LCD display
Speakers
FM Wire Antenna
VIDEO OUT jack
AUX IN jack
DC input (AC adaptor jack)
Battery Backup Compartment
M-103 IP
GB - 1
User Manual
Docking Clock Radio PLL for iPhone/iPod
Please read the instruction carefully
before operating the unit.
English GB - 2
GB - 4
Main Unit
Top View
BASIC OPERATION
Back View
GB - 3 GB - 5
UNPACKING YOUR UNIT
PRODUCT DESCRIPTION
TIME SETTING
Current time
When used for the first time, or if the mains plug has been removed with no backup
battery inside, the clock display will blink.
1. In OFF mode, Press the MEMO./SET button (4) on the unit, the clock blinks on the
display.
2. With clock display blinking, press FUNCTION button (5) to select 12 or 24 hour format.
3. Press the MEMO./SET button (4), the hour digits will flash, set the hour with (11)
or (12) button.
4. Press the MEMO./SET button (4) to save the hour setting, the minute digits flash. Set
the minutes with (11) or (12) button.
5. Press MEMO./SET button (4) to complete time setting.
NOTE: With clock display blinking, if no button is pressed within 8 seconds, it will return
to previous clock display.
SLEEP (Automatic turn off)
In sleep mode, the unit will turn off automatically after a specified time.
Note: Sleep time can only be set when the unit is turned ON.
You can select duration in minutes before the unit turns off automatically. Press SLEEP
button (8) repeatedly to select 90-80-70-60-50-40-30-20-10 or 00 minutes, then release
SLEEP button (8). “SLEEP” icon displays.
NOTES:
- To turn off the unit before the SLEEP activates, press ON/OFF button (1), or press
SLEEP button (8) repeatedly until value is adjusted to “00”. It will return to normal display
after 5 seconds, the sleep function will be cancelled and “SLEEP” icon will not be displayed.
- If the playing time from your iPhone or other player is shorter than the selected sleep
time, the music will stop at the end of the playing time.
ALARM SETTING
Cautions:
- The included AC adaptor is for use with this unit only. Do not use it with other equipments.
- When the unit is not going to be used for long time, disconnect the AC adaptor from the
AC outlet.
- Be sure to use it near the wall outlet. If a malfunction occurs, disconnect the plug from
the wall outlet at once.
- When the AC adaptor is plugged in, the apparatus is not completely disconnected from
the main power source, even when the unit is turned off.
- AC adaptor is used as the disconnect device. It shall remain readily operable and should
not be obstructed during intended use. To disconnect the apparatus from supply mains,
completely disconnect the AC adaptor of the apparatus from the mains socket outlet
Battery backup system
DC power: 2x1.5V, battery type AAA/R03/UM4 (not provided) for clock and alarm time
backup system.
An alkaline type battery is recommended. For optimum performance, this battery should
be replaced every 6 months.
BACKUP SYSTEM: All clock settings will be kept in memory; however, the clock time
may require adjustment for exact accuracy. If the backup battery is not installed, the
display will show the clock flashing to indicate that you have to reset the time and the
alarm.
Note: When the battery backup is functioning, the display has no backlight.
When you unpack your new iPhone/iPod clock-radio, make sure that you have removed
all the accessories and information papers:
- Docking Clock Radio PLL for iPhone/iPod
- AC adaptor
- 5 pieces iPhone/iPod interchangeable adaptors
- 1 piece Dust Cover
- User manual
LCD DISPLAY
D1. - Alarm #1 wake to buzzer
- Alarm #2 wake to buzzer
- Alarm #1 wake to iPhone/iPod
- Alarm #2 wake to iPhone/iPod
- Alarm #1 wake to radio
- Alarm #2 wake to radio
D2. -iPhone/iPod mode playback
D3. - Radio mode
D4. - AUX IN mode
D5. Equalizer modes
D6. Volume
D7. SNOOZE
D8. SLEEP
D9. Memory
D10.Time or radiofrequency display
D11. FM Stereo.
D12. Radio frequency unit
D13. “PM”-12hr time mode display
Turn on the unit
The unit is in clock mode when it is plugged in, Press ON/OFF button (1) to turn on or
turn off the unit.
Operating mode selection (FUNCTION)
Press FUNCTION button (5) repeatedly to select iPhone/iPod, AUX or Radio mode.
Sound volume
Press VOL +/- button (2) to adjust sound level. There are a total of 32 volume levels.
Equalizer
When listening to the radio, iPhone/iPod or other music source from AUX IN, press the
EQ button (3) repeatedly to select different modes: CLASSIC, ROCK, POP, JAZZ or EQ
off.
Display dimmer
In OFF mode, press the SNOOZE/DIM button (7) repeatedly will change the backlight
brightness of the display. There are 3 levels: low, medium, and high.
POWER SUPPLY
Using the AC adaptor
This AC adaptor operates on AC100-240V~50/60Hz.
• The supplied AC adaptor is suitable for use on AC mains supplies of 100-240V~50/
60Hz and should only be connected to a mains supply within these parameters.
• Use the supplied AC adaptor only. Using any other AC adaptor could damage the unit.
1.
2.
3.
4.
iPhone/iPod
not included
ＩＣＲ－２４８６　ＩＢ　ＭＵＳＥ　００１　ＲＥＶ０－ＧＢ．Ｐ６５ 2010-7-12, 15:411
IMPORTANT
The docking station in this system follows the Apple “Universal Dock” design. This sys-
tem can be fitted to different iPhone or iPod model.
Play your iPhone/iPod on the main unit
1. Connect your iPhone/iPod to the socket of the unit.
2. Press the ON/OFF button (1) to turn on the unit.
3. Press the FUNTION button (5) repeatedly to select iPhone/iPod mode. The display
indicates “iPhone”.
4. Press button (13) to play or pause. Press and hold button (13) for 5 seconds
to enter the iPod/iPhone sleep mode.
5. Select the previous or next track by pressing (11) or (12) button, press and
hold (11) or (12) on the unit to review or fast forward.
6. Press VOL + / - buttons (2) to adjust sound level.
iPhone call pick up
1. When phone call coming in, the music from the docking iPhone will pause automatically.
2. Incoming call ring comes out from the unit speaker.
3. You can take iPhone from the unit and pick up phone call.
4. After finish your call, connect back the iPhone to the socket, it will resume the playback
of iPhone.
Charge your iPhone/iPod
While your iPhone/iPod is docked on the system, its battery recharges automatically until
fully charged.
iPhone/iPod interchangeable adapter
This system includes 5 different adapters designed to allow you to securely connect any
“dockable” iPhone/iPod model to the docking station. Refer to the chart below to select
the proper adapter for your particular iPhone/iPod model and insert that adapter into the
docking station before connecting your iPhone/iPod.
NOTE: No adapter is provided for the 3G (third generation) iPod.
Please use that adapters that were included with these iPod at time of purchase. They
will fit properly into the docking station of this system.
We have also included one flat adapter with no opening at all. This serves as a dust
cover that can be inserted in the docking station if no iPhone/iPod will be connected to
the system for an extended period of time.
GB - 9
-The ventilation should not be impeded by covering the ventilation openings with items
such as newspapers, table-cloths, curtains, etc.
-No naked flame sources, such as lighted candles, should be placed on the apparatus.
-The use of apparatus in moderate climates.
-The apparatus should not be exposed to dripping or splashing.
-Ensure a minimum distance of 5cm around the apparatus for sufficient ventilation.
-Do not place objects filled with liquids, such as vases, on the apparatus.
-The rating plate is located on the bottom of unit.
-Attention should be drawn to the environmental aspects of battery disposal.
-Do not throw batteries in fire!
-Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
-Excessive sound pressure from earphones and headphones can cause hearing loss.
-Under the influence of electrical fast transient or/and electrostatic phenomenon, the
product may malfunction and require user to power reset.
MAINTENANCE
Cleaning
Be sure to turn the unit off and disconnect the AC adaptor before maintaining the
unit.
- Use a soft, dry, clean cloth. Regularly dust the vents at the back or sides.
- Using solvents, abrasive or alcohol-based products risks damaging the appliance.
- If an object or liquid enters inside the appliance, unplug it immediately and have it
checked by an authorized engineer.
If at any time in the future you should need to dispose of this product please note
that Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer
for recycling advice.(Waste Electrical and Electronic Equipment Directive)
GB - 6
GB - 10
CONNECTIONS
SPECIFICATIONS
GENERAL
Power source
Dimension
TUNER
Frequency range
AUDIO SECTION
Power Consumption
Speaker Impedance
SAFETY INSTRUCTION
ATTENTION: To reduce the risk of electric shock, do not remove the
cover or back. There are no user serviceable parts inside the unit.
Refer all servicing to qualified personnel.
The lightning flash with arrowhead symbol within the triangle is a warning sign
alerting the user of “dangerous voltage” inside the unit.
The exclamation point within the triangle is a warning sign alerting the user of
important instructions accompanying the product.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
GB - 7 GB - 8
GB - 11
LISTEN TO THE RADIO
Manual operation
1. Press ON/OFF button (1) to turn on the unit.
2. Press FUNCTION button (5) to select the RADIO mode. The display indicates “FM”
3. Press (11) or (12) to tune to a desired station.
Automatic search operation
Press and hold (11) or (12) button for approx. 2 seconds to start searching in
the chosen direction. The automatic searching operation locates strong stations. Press
again to stop searching. A station with a weak signal can be tuned manually.
NOTE: During the search operation the sound level will be muted automatically.
Program preset stations
This unit is able to store 20 FM radio stations in memory.
1. Select a radio station either manually or by automatic search.
2. Press MEMO./SET button (4) once, “MEMO” will flash and “01” will appear on display.
3. Press ALM. 1/M- (9) or ALM. 2/M+ (10) button to select a preset channel.
4. Press MEMO./SET button (4) again to save the radio station in the selected preset
channel.
5. Repeat steps 1-4 to store other stations.
When you memorize a station on a preset, the previous station is erased and replaced by
the new one.
Listening to the preset stations
Press ALM. 1/M- (9) or ALM. 2/M+ (10) button directly to select a preset station.
NOTE: For a better reception in FM, extend the antenna. If a stereo broadcast is received,
“((ST))” is displayed.
Made for iPod and iPhone
“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been
designed to connect specifically to iPod or iPhone respectively, and has been certified by
the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and
regulatory standards.
iPhone and iPod are trademarks of Apple Inc., registered in the U.S. and other countries.
LISTEN TO YOUR iPhone/iPod
AC 100-240V ~ 50/60Hz
DC 3V, 2x1.5V “AAA/R03/UM4” size batteries (not included) or
equivalent for memory backup
130(W) x 78 (H)x 120(D) mm
FM: 87.5 - 108 MHz
2X2W
8 ohms
IMPORTANT SAFETY INSTRUCTIONS
• AC adaptor is used as the disconnect device. It shall remain readily operable and should
not be obstructed during intended use. To be completely disconnected the apparatus
from supply mains, the AC adaptor of the apparatus shall be disconnected from the mains
socket outlet completely.
• Never use an AC adaptor that is damaged, route power lead in a safe manner and make
sure it is not subjected to trapping or pinching. If the power lead is damaged refer to a
qualified service agent.
• Place the unit on a flat and even surface.
• Do not restrict the air flow of the unit by placing it in a place with poor air flow, by
covering it with a cloth, or by placing it on carpeting.
• To avoid magnetized, do not place the unit near speaker or magnet.
• Do not use this unit in direct sunlight or leave the unit in a closed automobile (or yacht,
etc) where it would be exposed to high temperatures above 40°C.
• It also should not be placed in temperatures less than 5°C or greater than 35°C.
•Do not use the unit immediately after transportation from a cold place to a warm place,
condensation problem may result.
AUXILIARY
This unit includes the AUX IN jack (18) to allow you to connect external devices, such as
MP3 player, and listen to the music of your external device through the speakers of this
unit.
1. Connect the external device to the AUX IN jack (18) at the back of the unit.
2. Press ON/OFF button (1) to turn on the unit.
3. Press FUNCTION button (5) to select AUXILIARY mode. The display indicates “AUX”
4. Start to play your auxiliary source.
5. Adjust the volume to desired level.
6. To stop playback, disconnect your external device from the AUX IN jack.
VIDEO
You can view the video from the iPhone/iPod on a TV by connecting it to your unit via the
VIDEO OUT jack (17) at the back of unit.
Use the cable with yellow plug of an AV cable to connect the composite video output of
this unit to the video input of a TV/monitor.
ＩＣＲ－２４８６　ＩＢ　ＭＵＳＥ　００１　ＲＥＶ０－ＧＢ．Ｐ６５ 2010-7-12, 15:412

Especificaciones del producto

Marca: Muse
Categoría: Vocero
Modelo: M-103 IP

¿Necesitas ayuda?

Si necesitas ayuda con Muse M-103 IP haz una pregunta a continuación y otros usuarios te responderán


Vocero Muse Manuales

Muse

Muse M-1928 DJ Manual de Usario

11 Octubre 2024
Muse

Muse M-1982 DJ Manual de Usario

11 Octubre 2024
Muse

Muse M-930 DJN Manual de Usario

8 Octubre 2024
Muse

Muse M-1935 DJ Manual de Usario

27 Septiembre 2024
Muse

Muse M-1990 DJ Manual de Usario

22 Septiembre 2024
Muse

Muse M-360 BR Manual de Usario

19 Septiembre 2024
Muse

Muse M-530 KA Manual de Usario

19 Septiembre 2024
Muse

Muse M-980 CA Manual de Usario

19 Septiembre 2024
Muse

Muse M-360 BTB Manual de Usario

19 Septiembre 2024
Muse

Muse M-790 BT Manual de Usario

19 Septiembre 2024

Vocero Manuales

Últimos Vocero Manuales

Continental Edison

Continental Edison CELED53HP20V2B4 Manual de Usario

27 Octubre 2024
Canton

Canton Vento 830.2 Manual de Usario

27 Octubre 2024
Jamo

Jamo S7-25C Manual de Usario

27 Octubre 2024
Bowers Wilkins

Bowers Wilkins 707 S2 Manual de Usario

27 Octubre 2024
Monacor

Monacor GLS-301/GR Manual de Usario

27 Octubre 2024
Monitor Audio

Monitor Audio Silver C150 Manual de Usario

26 Octubre 2024
FBT

FBT MITUS 210M Manual de Usario

26 Octubre 2024
CyberData Systems

CyberData Systems SIP 011398 Manual de Usario

26 Octubre 2024
Lamax

Lamax PartyGo1 Play Manual de Usario

26 Octubre 2024
IKEA

IKEA SYMFONISK 405.847.50 Manual de Usario

26 Octubre 2024