Nec NP31ZL Manual de Usario

Lee a continuación 📖 el manual en español para Nec NP31ZL (4 páginas) en la categoría Accesorio para proyector. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
Lens Unit Users Manual
Model NP31ZL
This manual discusses specifications and focus adjustment for the NP31ZL short focus zoom lens.
For cautions on handling the lens, see the User’s Manual supplied with the lens.
For instructions on mounting, removing, and cleaning the lens, see the User’s Manual supplied with the projector.
NOTE: The drawings in this manual may differ slightly from the actual product.
Specifications
Throw distance (Unit: m)
Projector model name
Screen size (inch) PX750U PX700W PX800X
40” 0.6 - 0.8 0.7 - 0.8 0.6 - 0.8
50” 0.8 - 1.0 0.8 - 1.1 0.8 - 1.0
60” 1.0 - 1.2 1.0 - 1.3 0.9 - 1.2
80” 1.3 - 1.6 1.4 - 1.7 1.3 - 1.6
100 1.6 - 2.0 1.7 - 2.1 1.6 - 2.0
120 2.0 - 2.5 2.1 - 2.6 1.9 - 2.4
150 2.5 - 3.1 2.6 - 3.2 2.4 - 3.0
200 3.3 - 4.1 3.5 - 4.3 3.2 - 4.0
240 4.0 - 5.0 4.2 - 5.2 3.9 - 4.9
300 5.0 - 6.2 5.2 - 6.5 4.8 - 6.1
400 6.6 - 8.3 7.0 - 8.7 6.5 - 8.1
450 7.5 - 9.4 7.8 - 9.8 7.3 - 9.1
500 8.3 - 10.4 8.7 - 10.9 8.1 - 10.2
TIP:
Calculation of the throw distance from the screen size (m)
PX750U: H x 0.75 to H x 0.93 : 0.62 m (min.) to 10.41 m (max.)
PX700W: H x 0.79 to H x 0.98 : 0.65 m (min.) to 10.91 m (max.)
PX800X: H x 0.77 to H x 0.97 : 0.61 m (min.) to 10.16 m (max.)
* “H” (Horizontal) refers to the screen width.
* Figures differ by several % with the table above because the calculation is approximate.
Lens shifting range
Button operations on the projector or on the remote control allow you to move the position of the projected image in
the vertical and horizontal directions based on the following ranges.
Description of symbols: V indicates vertical (height of the projected image), H indicates horizontal (width of the pro-
jected image).
For adjusting the lens shift, see the User’s Manual supplied with the projector.
PX750U/PX700W
Desk/front projection
1V
1H
0.1H 0.1H
0.5V
Height of projected image
Width of projected image
Ceiling/front projector
1V
1H
0.1H 0.1H
0.5V
Height of projected image
Width of projected image
PX800X
Desk/front projection
1V
1H
0.1H 0.1H
0.43V
Height of projected image
Width of projected image
Ceiling/front projector
1V
1H
0.1H 0.1H
0.43V
Height of projected image
Width of projected image
Adjusting the focus
1. Focus on the projected image around the optical axis. (Powered focus)
The drawing below shows an example when the projected image is shifted upward. In this case the optical axis is at the bottom
edge of the projected image.
Adjusting with buttons on the cabinet
Use the FOCUS (+) or (-) button on the projector cabinet.
Adjusting with the remote control
Hold the CTL button and press the VOL/FOCUS +/− button.
Optical axis
* With the lens shift in the center position the optical axis is at the center of the image. In this case, adjust the focus
at the center of the projected image.

Especificaciones del producto

Marca: Nec
Categoría: Accesorio para proyector
Modelo: NP31ZL

¿Necesitas ayuda?

Si necesitas ayuda con Nec NP31ZL haz una pregunta a continuación y otros usuarios te responderán




Accesorio para proyector Nec Manuales

Accesorio para proyector Manuales

Últimos Accesorio para proyector Manuales