Numark CM100 Manual de Usario

Numark consola de mezclas CM100

Lee a continuación 📖 el manual en español para Numark CM100 (12 páginas) en la categoría consola de mezclas. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/12

Professional Disc Jockey Products

CM-100

PROFESSIONAL DJ MIXER

USER’S MANUAL

CM100

- The Leader in DJ Technology

Safety Information

SAFETY INSTRUCTIONS

Read Instructions

- All the safety and operating

instructions should be read before this product is connected

and used.

Retain Instructions

- The safety and operating instructions

should be kept for future reference.

Heed Warnings

- All warnings on this product and in these

operating instructions should be followed.

Follow Instructions

- All operating and other instructions

should be followed.

Water and Moisture -

This

product should be kept

away from direct contact

with liquids.

Heat

- Avoid placing this

product to close to any high heat sources such as radiators.

Ventilation -

The appliance should be situated so that it’s

location or position does not interfere with it’s proper

ventilation. For example, the appliance should not be

situated on a bed, sofa, rug,

or similar surface that may

block the ventilation

opening; or, placed in a built-

installation, such as bookcase

or cabinet that may impede

the flow of air through the ventilation openings.

Power Sources

- This product should be connected to a

power supply only of the type described in these operating

instructions, or as marked on the unit.

Power Cord Protection -

Power supply cords should be

routed so that they are not likely to be walked upon or

pinched by items placed on or against them. When

removing the cord from a power outlet be sure to remove

it by holding the

plug attachment

and not by pulling

on the cord.

Object and Liquid Entry -

Take care that objects do not fall

into and that liquids are not spilled into the inside of the

mixer.

Cleaning

– The appliance should be cleaned only as

recommended by the manufacturer.

Non-use Periods

– The power cord of the appliance should

be unplugged from the outlet when left unused for long

periods of time.

Damage Requiring Service -

Only qualified personnel

should service this product.

If you have any questions

about service please contact

Numark at the number(s)

shown on the back cover of

this manual.

Grounding or Polarization -

Precautions should be taken

so that the grounding or polarization means built into the

CD player is not defeated.

Internal/External Voltage Selectors -

Internal or external

voltage selector switches, if any, should only be reset and

re-equipped with a proper plug for alternative voltage by a

qualified service technician. Do not attempt to alter this

yourself.

WARNING: To reduce the risk of fire or electrical shock, do

not expose this appliance to rain or moisture. Electrical

equipment should NEVER be kept or stored in damp

environments.

CM100

- The Leader in DJ Technology

VERY IMPORTANT

Please read this entire manual before connecting this unit to your system

For optimum performance:

• The crossfader is a user replaceable item and subject to wear. Excessive force can wear out the fader quickly. This is not a

warranted item.

•

Never use spray cleaners on the slide controls

. Residues cause excessive dirt build-up and this will void your warranty. In normal

use slide controls can last for many years. If they malfunction (usually because of a dirty or dusty environment) consult a

professional technician.

• Always make sure that AC power is OFF while making any connections.

• Use appropriate cables throughout your system. Do not use excessively long cables (i.e. over 50ft/14m) Be sure plugs and jacks

are tightly mated. Loose connections can cause hum, noise or intermittents that could easily damage your speakers. Make the

input and output connections with readily available low-capacitance stereo cables. Quality cable makes a big difference in audio

fidelity and punch. See your Numark dealer or an electronics or audio specialist store if you are not sure which cables to get.

• Never attempt to make any adjustments or repairs other than those described in this manual. Take the unit to your dealer or to an

authorized Numark Service Center.

• ALWAYS remember: “TURN AMPS ON LAST AND OFF FIRST”. Begin with master faders or volume controls on minimum

and the amplifier gain/input control(s) down. Wait 8 to 10 seconds before turning up the volume. This prevents transients which

may cause severe speaker damage.

• Use restraint when operating controls. Try to move them slowly. Rapid adjustments could damage speakers due to amplifier

clipping.

• Avoid amplifier “clipping” at all costs: this occurs when the red LEDs (usually on the front panel of most professional power

amplifiers) start flashing. “Clipping” is when the power amplifier is distorting and working beyond it’s limits. Amplifier

distortion is

THE

major cause of speaker failure.

• To prevent fire or shock hazard, do not expose the unit to rain or moisture. Never place cans of beer, soda, glasses of water or

anything wet on top of the unit!

Product Registration

Please record the serial number of your unit as shown on the back of the chassis as well as the name of the

dealer from whom you purchased the unit. Retain this information and your original purchase receipt for your

records. Please return the enclosed warranty card to register your unit with us.

MODEL: __________________________ PURCHASED FROM:_________________________

SERIAL NUMBER:__________________ DATE OF PURCHASE:________________________

Especificaciones del producto

Marca:	Numark
Categoría:	consola de mezclas
Modelo:	CM100
Color del producto:	Wit
Tecnología de conectividad:	Draadloos
Método de montaje:	Muur
Batería/duración de la batería:	1 jaar
Rango maximo:	100 m
Frecuencia:	868.3 MHz
Dimensiones (Ancho x Fondo x Alto):	60 x 95 x 85 mm
Tecnología de batería:	Alkaline
Tipo de Batería:	9V