Numark DM3002X Manual de Usario
Numark
Mengpaneel
DM3002X
Lee a continuación 📖 el manual en español para Numark DM3002X (12 páginas) en la categoría Mengpaneel. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/12
Professional Disc Jockey Products
DM3000X/DM3002X
DJ MIXERS
Owner’s Manual
©2001 Industries http://www.numark.com
DM3000X/DM3002X
- The Leader in DJ Technology
©2001 Industries - 2 - http://www.numark.com
Safety Information
SAFETY INSTRUCTIONS
a) Read Instructions - All the safety and operating
instructions should be read before this product is
connected and used.
b) Retain Instructions - The safety and operating
instructions should be kept for future reference.
c) Heed Warnings - All warnings on this product and in
these operating instructions should be followed.
d) Follow Instructions - All operating and other instructions
should be followed.
e) Water and Moisture -
This product should be
kept away from direct
contact with liquids.
f) Heat - Avoid placing this
product to close to any high heat sources such as
radiators.
g) Ventilation - The appliance should be situated so that it’s
location or position does not interfere with it’s proper
ventilation. For example, the appliance should not be
situated on a bed, sofa, rug,
or similar surface that may
block the ventilation
opening; or, placed in a
built-installation, such as
bookcase or cabinet that may
impede the flow of air through the ventilation openings.
h) Power Sources - This product should be connected to a
power supply only of the type described in these
operating instructions, or as marked on the unit.
i) Power Cord Protection - Power supply cords should be
routed so that they are not likely to be walked upon or
pinched by items placed on or against them. When
removing the cord from a power outlet be sure to remove
it by holding the
plug attachment
and not by pulling
on the cord.
j) Object and Liquid Entry - Take care that objects do not
fall into and that liquids are not spilled into the inside of
the mixer.
k) Cleaning – The appliance should be cleaned only as
recommended by the manufacturer.
l) Non-use Periods – The power cord of the appliance
should be unplugged from the outlet when left unused
for long periods of time.
m) Damage Requiring Service - Only qualified personnel
should service this product.
If you have any questions
about service please
contact Numark at the
number(s) shown on the
back cover of this manual.
n) Grounding or Polarization - Precautions should be taken
so that the grounding or polarization means built into the
CD player is not defeated.
o) Internal/External Voltage Selectors - Internal or external
voltage selector switches, if any, should only be reset
and re-equipped with a proper plug for alternative
voltage by a qualified service technician. Do not attempt
to alter this yourself.
WARNING: To reduce the risk of fire or electrical shock, do
not expose this appliance to rain or moisture. Electrical
equipment should NEVER be kept or stored in damp
environments.
DM3000X/DM3002X
- The Leader in DJ Technology
©2001 Industries - 3 - http://www.numark.com
VERY IMPORTANT
Please read this entire manual before connecting this unit to your system
For optimum performance:
• The crossfader is a user replaceable item and subject to wear. Excessive force can wear out the fader quickly. This is not a
warranted item.
• Never use spray cleaners on the slide controls. Residues cause excessive dirt build-up and this will void your warranty. In
normal use slide controls can last for many years. If they malfunction (usually because of a dirty or dusty environment) consult
a professional technician.
• Always make sure that AC power is OFF while making any connections.
• Use appropriate cables throughout your system. Do not use excessively long cables (i.e. over 50ft/14m) Be sure plugs and jacks
are tightly mated. Loose connections can cause hum, noise or intermittents that could easily damage your speakers. Make the
input and output connections with readily available low-capacitance stereo cables. Quality cable makes a big difference in
audio fidelity and punch. See your Numark dealer or an electronics or audio specialist store if you are not sure which cables to
get.
• Never attempt to make any adjustments or repairs other than those described in this manual. Take the unit to your dealer or to
an authorized Numark Service Center.
• ALWAYS remember: “TURN AMPS ON LAST AND OFF FIRST”. Begin with master faders or volume controls on minimum
and the amplifier gain/input control(s) down. Wait 8 to 10 seconds before turning up the volume. This prevents transients which
may cause severe speaker damage.
• Use restraint when operating controls. Try to move them slowly. Rapid adjustments could damage speakers due to amplifier
clipping.
• Avoid amplifier “clipping” at all costs: this occurs when the red LEDs (usually on the front panel of most professional power
amplifiers) start flashing. “Clipping” is when the power amplifier is distorting and working beyond it’s limits. Amplifier
distortion is THE major cause of speaker failure.
• To prevent fire or shock hazard, do not expose the unit to rain or moisture. Never place cans of beer, soda, glasses of water or
anything wet on top of the unit!
Product Registration
Please record the serial number of your unit as shown on the back of the chassis as well as the name of the
dealer from whom you purchased the unit. Retain this information and your original purchase receipt for
your records. Please return the enclosed warranty card to register your unit with us.
MODEL: __________________________ PURCHASED FROM:_________________________
SERIAL NUMBER:__________________ DATE OF PURCHASE:________________________
Especificaciones del producto
Marca: | Numark |
Categoría: | Mengpaneel |
Modelo: | DM3002X |
¿Necesitas ayuda?
Si necesitas ayuda con Numark DM3002X haz una pregunta a continuación y otros usuarios te responderán
Mengpaneel Numark Manuales
20 Septiembre 2024
28 Agosto 2024
4 Agosto 2024
27 Julio 2024
26 Julio 2024
25 Julio 2024
25 Julio 2024
25 Julio 2024
25 Julio 2024
25 Julio 2024
Mengpaneel Manuales
- Mengpaneel Philips
- Mengpaneel Inventum
- Mengpaneel JBL
- Mengpaneel Krups
- Mengpaneel Pioneer
- Mengpaneel Yamaha
- Mengpaneel Alpina
- Mengpaneel Allen-Heath
- Mengpaneel Akai
- Mengpaneel Alto
- Mengpaneel Nedis
- Mengpaneel Black And Decker
- Mengpaneel KitchenAid
- Mengpaneel Pyle
- Mengpaneel Hyundai
- Mengpaneel Clatronic
- Mengpaneel Fritel
- Mengpaneel Taurus
- Mengpaneel Concept
- Mengpaneel Audio-Technica
- Mengpaneel Gemini
- Mengpaneel Toa
- Mengpaneel Denon
- Mengpaneel Vonyx
- Mengpaneel Philco
- Mengpaneel Korg
- Mengpaneel LD Systems
- Mengpaneel Bogen
- Mengpaneel Technics
- Mengpaneel Allen & Heath
- Mengpaneel Bose
- Mengpaneel Proline
- Mengpaneel Mackie
- Mengpaneel Envivo
- Mengpaneel Peavey
- Mengpaneel Behringer
- Mengpaneel PreSonus
- Mengpaneel Tascam
- Mengpaneel Midas
- Mengpaneel Auna
- Mengpaneel Blaze
- Mengpaneel Samson
- Mengpaneel Bifinett
- Mengpaneel Primo
- Mengpaneel Shure
- Mengpaneel Reloop
- Mengpaneel Chandler
- Mengpaneel Wharfedale
- Mengpaneel Soundcraft
- Mengpaneel Team
- Mengpaneel Dynacord
- Mengpaneel QSC
- Mengpaneel Omnitronic
- Mengpaneel Roadstar
- Mengpaneel Scott
- Mengpaneel Radial Engineering
- Mengpaneel ATen
- Mengpaneel Turmix
- Mengpaneel Skytec
- Mengpaneel DBX
- Mengpaneel Monoprice
- Mengpaneel Ibiza Sound
- Mengpaneel Elysia
- Mengpaneel Proel
- Mengpaneel HQ Power
- Mengpaneel Adastra
- Mengpaneel Power Dynamics
- Mengpaneel Citronic
- Mengpaneel Kalorik
- Mengpaneel SPL
- Mengpaneel Monacor
- Mengpaneel Warm Audio
- Mengpaneel Martin
- Mengpaneel DAP Audio
- Mengpaneel Venga
- Mengpaneel Crown
- Mengpaneel Dateq
- Mengpaneel Speco Technologies
- Mengpaneel Flama
- Mengpaneel Icon
- Mengpaneel Kramer
- Mengpaneel Karma
- Mengpaneel ANT
- Mengpaneel IMG Stage Line
- Mengpaneel Atlas Sound
- Mengpaneel Rane
- Mengpaneel Phonic
- Mengpaneel Koda
- Mengpaneel Sound Devices
Últimos Mengpaneel Manuales
20 Septiembre 2024
18 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
15 Septiembre 2024
15 Septiembre 2024
15 Septiembre 2024