Optoma EVBMN-M110 Manual de Usario

Optoma Accesorio para proyector EVBMN-M110

Lee a continuación 📖 el manual en español para Optoma EVBMN-M110 (1 páginas) en la categoría Accesorio para proyector. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/1
User's Manual
HDMI Extender over CAT5
with IR, Ethernet & Serial Extending
RoHS
PP5-HEM152Z-000
Package Contents
● Transmitter Unit x 1
● Receiver Unit x 1
● Power Adapter Set x 1
Power Adapter with necessary AC Cord
or
Plug-in Power Adapter
● User’s Manual x 1
● Foot Pad Set x 2
● IR External Sensor Kit x 1
● CAT5 Cable x 1
● Grounding Wire x 2
Optional:
● IR External Sensor Kit
● HDMI Cable
● Serial Cable
Connection Pattern
Operation
The LEDs on the Extender Units show the real-time status indicating the
linking and communication between the Transmitter Unit and Receiver
Unit. Users can identify the present status through the LED indicator on
the top.
The quality of the output signal will depend largely upon the quality of
video source, cable and display device used. Low quality cables degrade
output signal causing elevated noise levels. Please use the proper cable
and make sure the display device is capable of handling the resolution
and refresh rate selected.
NOTE:
1. The system will disable the video output signal when it detects non-
HDCP compliant display(s) on playing the HDCP video source. All the
connected output displays MUST be HDCP compliant, when the video
source is HDCP compliant.
2. If there’s no signal detected from HDMI port, the baud rate will
automatically speed down to 9,600 bps.
Specications
Users can connect the video source to the Transmitter Unit, connect
the monitor to the Receiver Unit. Connect to Ethernet devices to the
Transmitter and the Receiver Units (LAN ports) and use CAT5e/6 cable
(EIA / TIA 568B industry standard compliant) for the connection between
the Transmitter (Link Port) and Receiver Unit (Link Port) . After all device
connections are completed, connect the provided power cord into an
appropriate power source and plug the opposite end into the power
connector* on the Unit to power up.
CAUTION: The CAT5e/6 cables that connect the Transmitter and Receiver
Units carry electrical current and should not be plugged in to other
devices, as they may cause damage. We strongly recommend marking the
CAT5e/6 cables you are using with this product at both locations for easy
identication.
The nal specication is the actual product based.
Features and functions may be added or changed
after the manual was written. Please v isi t our
website to download the latest version of manual
for reference.
◘
◘
Limited Warranty
IN NO EVENT SHALL THE DIRE CT VENDOR'S LIABILITY FOR DIR ECT OR INDIRECT,
SPECIAL, INCIDENTIAL OR CONSEQUENTIA L DAMAGES, LOSS OF PROFIT, LOSS
OF BUSINESS, OR FINANCIAL LOSS WHICH MAY BE CAUSED BY THE USE OF THE
PRODUCT EXCEEDS THE PRICE PAID FOR THE PRODUCT.
The direct vendor makes no warranty or representation, expressed or implied with respect to
the contents or use of this documentation, and especially disclaims its quality, performance,
merchantability, or tness for any particular purpose.
The direct vendor also reserves the right to revise or update the product or documentation
without obligation to notify any user of such revisions or updates. Fo r further information,
please contact your direct vendor.
All the brand names and registered trademarks are the property of their respective owners.
● Prior to installation, ensure to power off all devices that will be
connected to this system.
● Ensure that all devices you will connect are properly grounded.
● Place cables away from uorescent lights, air conditioners, and
machines that are likely to generate electrical noise.
Rextron
Features
● Send HDMI signal to multimedia display over CAT5e/6 cable of up to
100 meters
● Transmit full uncompressed HD video and audio over cable
● 100BaseT Ethernet Pass-Thru; simultaneously distribute HDMI and
Ethernet streaming video from source to display
● Low cost standard CAT5e/6 LAN cable; advanced and inexpensive
all-in-one connectivity technology
● HDCP compliant and Blu-ray ready
● Support Deep Color, HD-3D video and HD Audio formats
● Support resolution up to Full HD 1080p / 2048 x 1152
● Bi-directional LAN & Serial & two-way IR control
● IR extension supported
● Support Phantom Power -- single power supply at either one end of
two units (Tx & Rx)
● Compact size; easy to set up; simple to install
● Ideal for hospitality (hotels, conference rooms), digital signage
(airports, shopping malls), surveillance cameras, whole-home
networking and point-to-point consumer applications
EVBMN-M110 Transmitter Unit Receiver Unit
EVBMN-110L EVBMN-110R
Input → Output HDMI → RJ-45 RJ-45 → HDMI
LED Status LED Dual Color x 1 Dual Color x 1
LAN LED Single Color x 3 Single Color x 3
Video Resolution (max.) Full HD (1080p@60Hz)
Extension Distance 100M
Ethernet Port RJ-45 x 3 RJ-45 x 3
10/100 Mbps
Serial Port DCE, DB9-F DTE, DB9-M
115kbps (max.)
IR Extension 　x 1, IR Transceiver
　x 1, IR Receiver
　x 1, IR Transceiver
　x 1, IR Receiver
Power Supply DC 12V (Phantom Power)
Enclosure Metal
Weight (gram) 410~420
H x W x D (mm) 140 x 85 x 34
*Above video resolution and extension distance are based on a single CAT5e/6
24AWG solid cable without cascade. STP cabling is recommended for environments
with high EMI or RFI. For the best performance results, using stranded cabling or
other thinner cables, and coiling of excess cable lengths should be avoided. Type Function100M 70M
Tx + Rx EVBM-M110 EVBM-M107 CAT5 HDMI Extender Pair
Tx
(Splitter) EVBM-1104L EVBM-1074L CAT5 HDMI Splitter (2-in / 4-out)
with Auto-sensing function
Tx
(Switch-
Splitter)
EVBM-S1504L EVBM-S1474L CAT5 HDMI Switch-Splitter (4-in / 4-out)
with Auto-sensing function
Related Products (without Ethernet & Serial function)
CAT5 100M
IR Transceiver
Switch Hub
To Serial Terminal
IR Receiver
ADSL
Serial Devices
Installation Product Description
EVBMN-M110
(EVBMN-110L + EVBMN-110R)
Rear Panel
Front Panel
La Ls
Tx / Rx
La LAN LED Yellow: LAN status (Data communication)
Ls Status LED
[Tx] Blue: Link status; Green: Power on;
Flashing Blue+Green: Power-saving mode
[Rx] Blue: Link status; Red: Power on;
Flashing Blue+Red: Power-saving mode
T1 R1 RJ-45
Connector Connect to Ethernet devices
T2 R2 HDMI
Connector
[T2] Connect to an HDMI video source
[R2] Connect to an HDMI disply
T3 R3 RJ-45
Connector Use CAT5e/6 for connection between two units.
T4 R4 Serial Port [T4] (DCE) Connect to a computer
[R4] (DTE) Connect to a serial device
IR1(in)
IR Remote
Jack
Connect to an IR Receiver
IR1(out) Connect to an IR Transceiver
IR2(in) Connect to an IR Receiver
IR2(out) Connect to an IR Transceiver
PPower Supply* Apply power to the unit.
*Phantom Power: Only one power adapter is required to power the entire
system. The power adapter may be connected to either the Transmitter Unit
or the Receiver Unit.
Cabling Requirements
HDMI transmission running along the Ethernet cabling is particularly
susceptible to EMI (electro magnetic interference) or RFI (radio frequency
interference). It can be caused by being in close to fluorescent lighting or
power cabling. The following are some considerations that you should pay
attention to.
1. Place cables away from uorescent lights, air conditioners, and machines
that are likely to generate electrical noise.
2. The shielded cables (FTP, STP) are suggested for they can reduce the
interference, and work better to EMI or RFI than UTP cables.
3. For superior video quality, unbundled cables work better than bundled
ones. Bundled cable of greater than 3 ft. diameter will have minor effect on
the cable length.
4. The solid cable will work better than stranded cable. It may shorten the
transmission distance if you use stranded cabling or other cables thinner
than 24AWG. That is, solid cable of larger than 24AWG is strongly
suggested. Additionally, CAT6 is more recommended.
5. Joined cables can result in signal loss and shortening transmission
distance. Therefore, for the optimal transmission distance, we recommend
using only one piece of cable (without any immediate joints) between
transmitter and receiver units.
Other Notices
1. Due to EMI or RFI, some certain brands/types of displays, like monitors
and TVs, may result fuzzy or snowing on screens. In this case, please try
to restart the displays.
2. As the system transmits massive data, temperature rises on the unit is a
normal phenomenon, so please do not open any components inside by
yourself.
3. The unit is a sealed structure; should not be tampered with by anyone
other than registered installer.
Tx
Rx
T4P
T1
T2T3
Grounding
IR1(in)
Tx
Grounding
R1
R2R3
R4P
Rx
IR Transceiver
IR Receiver
IR1(out)
IR2(out)
IR2(in)

Especificaciones del producto

Marca: Optoma
Categoría: Accesorio para proyector
Modelo: EVBMN-M110

¿Necesitas ayuda?

Si necesitas ayuda con Optoma EVBMN-M110 haz una pregunta a continuación y otros usuarios te responderán


Accesorio para proyector Optoma Manuales

Optoma

Optoma EVBMN-M110 Manual de Usario

29 Julio 2024

Accesorio para proyector Manuales

Últimos Accesorio para proyector Manuales

Barco

Barco R9853370 Manual de Usario

18 Octubre 2024
Barco

Barco R9861400 Manual de Usario

27 Septiembre 2024
Da-Lite

Da-Lite Project-O-Stand 42068 Manual de Usario

22 Septiembre 2024
My Wall

My Wall HL 41 ML Manual de Usario

17 Septiembre 2024
Speaka

Speaka SP-PWM-200 Manual de Usario

17 Septiembre 2024
Speaka

Speaka SP-PWM-100 Manual de Usario

17 Septiembre 2024
Speaka

Speaka PRB-1 Manual de Usario

17 Septiembre 2024
Roadinger

Roadinger UP-4 QCL Manual de Usario

17 Septiembre 2024
Panasonic

Panasonic ET-D3LEW300 Manual de Usario

17 Septiembre 2024
Unicol

Unicol PGG Manual de Usario

17 Septiembre 2024