Ozito ACK-0015 Manual de Usario
Lee a continuación 📖 el manual en español para Ozito ACK-0015 (2 páginas) en la categoría Compresor. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/2
INFLATE-IT
COMPRESSOR KIT
1100 W
INSTRUCTION MANUAL
SPECIFICATIONS
Power supply: 230 – 240V ~ 50Hz
Motor: 1100W (S3:15%)
No Load Speed: 3,550/min
Max. Pressure: 8bar (116psi)
Max. Flow Rate: 140 l/min
IP Rating: IP20
Product weight: 5.7 kg
ACK-0015
WHAT’S IN THE BOX
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: valve adaptors
and accessories.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
thanthatspeciedonthetool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
DESCRIPTION OF SYMBOLS
CARING FOR THE ENVIRONMENT
Power tools that are no longer usable should not be disposed of
with household waste but in an environmentally friendly way. Please
recycle where facilities exist. Check with your local council authority
for recycling advice.
Recycling packaging reduces the need for landll and raw materials.
Reuse of recycled material decreases pollution in the environment.
Please recycle packaging where facilities exist. Check with your
local council authority for recycling advice.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/NewZealand(HeadOfce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
Thebenetsprovidedunderthiswarrantyareinaddition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
Gun with Gauge & Hose 402052101001
Air Nozzle 402052001040
Spare parts can be ordered from the Special Orders Desk
at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: enquires@ozito.com.au
SPARE PARTS
ozito.com.au
This appliance is not intended for use by young or inrm persons unless supervised by are
sponsible person to ensure that they can use the appliance safely. Young children should be
supervision to ensure that they do not play with play with the appliance.
WARNING. Before connecting a tool to a power source (mains switch power point
receptacle, outlet, etc.) be sure that the voltage supply is the same as that specied on the
nameplate of the tool. A power source with a voltage greater than that specied for the tool
can result in serious injury to the user, as well as damage to the tool. If in doubt, do not plug in the tool.
Using a power source with a voltage less than the nameplate rating is harmful to the motor.
Always remove the plug from the mains socket before making any adjustments or maintenance.
• To reduce the risk of re or explosion, never spray ammable liquids in a conned area. If sparks
come into contact with petrol vapours or solvents, they may ignite the vapours and cause a re or
explosion.
• Always operate the compressor in a well ventilated area. Do not smoke while spraying. Do not
spray where sparks or ames are present. Keep the compressor as far away from the spray area as
possible.
• The solvents trichloroethane and methylene chloride can chemically react with the aluminium
used in some paint spray guns and form an explosion. If these solvents are used, ensure that only
stainless steel spray equipment is connected. The compressor is not affected by the use of these
solvents.
• Never directly inhale the compressed air produced by a compressor and do not use it for charging
breathing tanks.
• Do not use welding equipment in close proximity to the compressor. Do not weld anything to the air
tank of the compressor: this could dangerously weaken the tank and will void the warranty.
• Do not use the compressor outdoors when it is raining or on a wet surface; either situation could
cause an electric shock.
• Always maintain a safety distance of at least 3 meters between the compressor and the work area,
Ensure that the compressor is on a stable surface.
• Always use the handle to move the compressor.
• Never let the compressor come into contact with water or other liquids, as the appliance is live, this
could cause electrocution or short-circuits. Never use the appliance with bare feet, wet hands or wet
feet.
•
Never pull on the power cable to disconnect the plug from the power outlet or to move the compressor.
• The compressed air produced by the compressor cannot not be used for pharmaceutical, food or
medical purposes or to ll the air bottles of scuba divers.
• Do not cover the air inlets on the compressor.
• Compressors and lines reach high temperatures during operation. Avoid contact! Risk of burns!
• Gases or vapours drawn in by the compressor have to be kept free of constituents that may cause
re or explosions inside the compressor.
• When you disconnect the hose coupling, hold the coupling element in your hand to prevent injury
from the whiplashing hose.
• Never point the blow-out gun at other persons and never use it to clean clothes that are still being
worn.
• Be certain to read all the labels on the containers of paint or other materials to be sprayed. Closely
follow all safety instructions. Use a respirator mask if there is a chance that you might otherwise
inhale the spray material. Carefully check the effectiveness of any respirator mask you intend using.
• Always wear safety goggles or glasses when using the air compressor. Never point the nozzle of an
accessory towards any part of your body or towards another person.
• Keep the compressor at least 300mm from the nearest wall to ensure adequate ventilation for
cooling purposes.
• Protect the air hose and cordset from damage. Inspect for weak or worn spots regularly and replace
if necessary.
• Avoid using an extension cord with this product. Use additional air hose instead of an extension
cord to prevent power loss and possible damage to the motor. Use of an extension cord voids the
warranty.
• Always switch off the compressor before switching off the power or removing the power plug.
• After using the compressor, switch off the on/off button, disconnect the power supply and release
any remaining pressure.
• Do not attempt to remove any part of the machine whilst it is under pressure.
• Use safety equipment including safety goggles or shield, ear protection, breathing or respirator
mask and protective clothing.
Wear goggles, wear earmuffs, wear a breathing mask
Never apply the outlet air of this compressor directly on to any part of a person’s body. Do not attempt to
block the air outlet with your nger or any part of your body.
The tool must be used only for its prescribed purpose. Any use other than those mentioned in this
Manual will be considered a case of misuse. The user and not the manufacturer shall be liable for any
damage or injury resulting from such cases of misuse.
The manufacturer shall not be liable for any changes made to the tool nor for any damage resulting from
such changes.
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The
following hazards may arise in connection with the tool’s construction and design:
• Damage to the lungs if an effective breathing mask is not worn.
• Damage to hearing if effective earmuffs are not worn.
• Damage to the eyes if effective safety goggles or shield are not worn.
WARNING. I
n the event that an air line is cut or broken, the air supply must be turned off at
the compressor. A broken air line which is not supported is extremely dangerous and can whip
around very quickly, both with the capability of striking people, and blowing foreign particles into
the air.
Do not attempt to catch the air line but immediately keep bystanders well clear and turn off the air
supply to the hose, turn off the compressor at the On / Off button, and then remove the hose from the
compressor.
AIR COMPRESSOR SAFETY WARNINGS
WARNING! Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference. The term “power tool” in the
warnings refers to your mains-operated (corded) power tool or battery-operated (cordless)
power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b.
Do not operate power tools in explosive atmospheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c. Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools. Unmodied plugs and
matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is earthed or
grounded.
c. Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
e. When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
f. If operating a power tool in a damp location is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces the risk of electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the inuence of drugs, alcohol
or medication.
A moment of inattention while operating power tools may result in serious personal injury.
b. Use personal protective equipment. Always wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting
to power source and/or battery pack, picking up or carrying the tool. Carrying power
tools with your nger on the switch or energising power tools that have the switch on invites
accidents.
d. Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
e. Do not overreach. Keep proper footing and balance at all times. This enables better control
of the power tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g. If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce dust-
related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
b. Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or the battery pack from the power tool
before making any adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power tool’s operation. If damaged,
have the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the
power tool for operations different from those intended could result in a hazardous situation.
5. Service
a. Have your power tool serviced by a qualied repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
b. If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualied persons in order to avoid a hazard.
GENERAL POWER TOOL SAFETY WARNINGS-PERSONAL SAFETY
ELECTRICAL SAFETY
1113
6. CLEANING & MAINTENANCE
OPERATION
7. STORAGE
IMPORTANT! BEFORE CLEANING YOUR COMPRESSOR
OR CARRYING OUT ANY MAINTENANCE PROCEDURE,
MAKE SURE THAT THE MOTOR IS OFF AND THE TOOL
DISCONNECTED FROM THE POWER SUPPLY TO PREVENT
ACCIDENTAL STARTING.
IMPORTANT! WAIT UNTIL THE COMPRESSOR HAS
COMPLETELY COOLED DOWN. RISK OF BURNS!
IMPORTANT!
ALWAYS DEPRESSURIZE THE EQUIPMENT
BEFORE CARRYING OUT ANY CLEANING AND
MAINTENANCE WORK.
Cleaning
• Keep the safety devices free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it with compressed
air at low pressure.
• We recommend that you clean the appliance immediately
after you use it.
• Clean the appliance regularly with a damp cloth and some soft soap.
Do not use cleaning agents or solvents; these may be aggressive to
the plastic parts in the appliance. Ensure that no water can get into
the interior of the appliance.
• You must disconnect the hose and any spraying tools from the
compressor before cleaning. Do not clean the compressor with
water, solvents or the like.
IMPORTANT! STORE THE COMPRESSOR ONLY IN
A DRY LOCATION WHICH IS NOT ACCESSIBLE TO
UNAUTHORISED PERSONS. ALWAYS STORE UPRIGHT,
NEVER TILTED!
Air Compressor
Air Gun
Ination Adaptors x 3
Air Nozzle
5. TROubLE ShOOTING
Problem Cause Solution
The compressor
does not start
No supply voltage Check the supply
voltage, the power
plug and the socket-
outlet.
Insufcient supply
voltage
Make sure that the
extension cable is
not too long.
Try another product
in power point
Outside temperature is
too low
Never operate
with an outside
temperature of
below 5°c.
Motor is overheated Allow the motor
to cool down. If
necessary, remedy
the cause of the
overheating.
The compressor
starts but there is no
pressure
The seals are
damaged.
Check the seals
and have any
damaged seals
replaced by a
service centre
The compressor
starts, but the tools
do not .
Loose hose
connections
Check the
compressed air
hose and tools
and replace if
necessary.
Leak in a quick-lock
coupling
Check the quick-
lock coupling
and replace if
necessary.
MAINTENANCE
WARNING! When using mains-powered tools, basic safety precautions, including the
following, should always be followed to reduce risk of re, electric shock, personal injury
and material damage.
Read the whole manual carefully and make sure you know how to switch the tool off in an emergency, before
operating the tool.
Save these instructions and other documents supplied with this tool for future reference.
The electric motor has been designed for 230V and 240V only. Always check that the power supply
corresponds to the voltage on the rating plate.
Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand.
This tool is double insulated in accordance with AS/NZS 60335:2002;
therefore no earth wire is required.
If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid
a hazard.
Note: Double insulation does not take the place of normal safety precautions when operating this tool. The
insulation system is for added protection against injury resulting from a possible electrical insulation failure
within the tool.
Using an Extension Lead
Always use an approved extension lead suitable for the power input of this tool. Before use, inspect the
extension lead for signs of damage, wear and ageing. Replace the extension lead if damaged or defective.
When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not
suitable for the power input of the tool or which is damaged or defective may result in a risk of re and electric
shock.
The power outlet for the compressor is recommended to be protected by a 30amp residual current device
VVolts Hz Hertz
~Alternating current WWatts
min¯
Revolutions or
reciprocation per minute
no No load speed
Warning
Wear hearing protection
Read instruction manual
Beware of electrical voltage
Regulator compliance mark
Beware of hot parts.
97
Sound power level
Pressure ratingbar
lLitres Double insulated
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
7. Air Gun
8. Air Hose
9. Valve Connector
10. Pressure Gauge
11. Air Gun Trigger
12. Integrated Release Valve
13. Blower Nozzle
14. In ation Adaptors
Using the Equipment
as a Blower Pistol
1. To use the air gun as a
blower pistol you must rst
unscrew and remove the
rubber hose.
2. The blower nozzle can then be
screwed into the in ation gun.
3. By varying the pressure on the
trigger, you can control the amount
of compressed air released through
the air nozzle.
WARNING!: OPERATOR IS ADVISED TO WEAR EYE
PROTECTION WHEN USING THE AIR GUN. TAKE
CARE NOT TO BLOW DIRT OR OTHER LOOSE
PARTICLES TOWARDS YOURSELF OR OTHER PERSONS
4. The blower nozzle adapter is useful
for blowing dust out of hollow
spaces or hard to reach areas,
such as vents in electrical items or
between the keys of a keyboard.
It is also useful for cleaning soiled
equipment.
5. To in ate the tyre, hold down
the trigger of the air gun.
6. After a short time, release the trigger and
check the tyre pressure by referring to the
pressure gauge.
7. If the tyre pressure is too high,
it can be reduced with the
integrated release valve.
Connecting to the Compressed Air Hose
1. Insert the nipple of the air tool into the
quick-lock coupling of the air hose.
2. The quick-lock sleeve will spring forward
automatically, connecting the accessory.
Disconnecting
1. To disconnect the air tool, pull back the
sleeve on the quick-lock coupling and
remove the tool.
In ating Tyres
1. Attach the air gun to the
compressed air hose.
2. When in ating tyres with normal “Schrader”
valves, no adaptors need to be tted to the
rubber hose.
3. Connect the rubber hose of the air gun
to the tyre by pressing the end of the
hose onto the tyre valve while holding
down the hose tab.
4. Release the valve connector. The hose
will now be connected to the tyre valve.
Switching On and Off
Note: It is recommended to use in conjunction with this appliance a
Residual Current Device (RCD) of rating not exceeding 30mA.
1. Attach the desired tool to the quick
release coupling of the air hose.
2. Connect the compressors’ power
cord to the mains power supply.
3. To switch ON the equipment, set the
On/Off switch to position “I” (On).
4. To switch OFF the equipment, move
the On/Off switch to position “0” (Off).
Disconnect the power cord from the
mains.
5. Run the attached air tool until no
compressed air remains in the hose.
1. Supporting Foot
2. Housing
3. ON/OFF Switch
4. Transport Handle
5. Quick-release Nitto Coupling
6. Compressed Air Hose
AIR COMPRESSOR
ACCESSORIES
KNOW YOUR PRODUCT
ACK-0015
1. ASSEMbLY AND STARTING 4. bLOWER PISTOL3. INFLATING2. OPERATION
Pre Setup Checks
• Examine the machine for signs of transit damage. If damaged, do not
use, return to place of purchase
• The compressor should be set up near to the user.
• Avoid long air lines and long supply lines (extensions).
• Make sure the intake air is dry and dust-free.
• Do not set up the compressor in damp or wet rooms.
• The compressor is designed to be used in dry rooms. It is prohibited
to use the compressor in areas where work is conducted with sprayed
water. Before you use the machine, make sure that the mains voltage
complies with the speci cations on the rating plate.
SETUP & PREPARATION OPERATION
21 3 5 64
WARNING!: DO NOT DIRECT THE JET OF
COMPRESSED AIR TOWARDS PEOPLE OR ANIMALS.
IMPORTANT!: WHEN RELEASING THE QUICK-RELEASE
COUPLING, BE SURE TO HOLD THE COUPLING PIECE
TO PROTECT YOURSELF AGAINST INJURY FROM THE
REBOUNDING HOSE.
IMPORTANT!: BEFORE CONNECTING OR DISCONNECTING
ACCESSORIES, ALWAYS MAKE SURE THAT THE
COMPRESSOR IS OFF.
In ating other items
The compressor kit is supplied with a variety of adapters that can be
tted to the rubber hose. These adapters are suitable for different valves
that are often used on in atable items:
Adapter A is used for footballs, basketballs,
soccer balls etc.
Adapter B is used for rubber dinghies,
in atable small swimming pools and air beds.
Adapter C is used for bicycle tyres with
“French” or “Presta” valves.
Attaching In ation Adaptors
to the Rubber Hose
1. Push the suitable adaptor into
the rubber hose while pressing
the hose tab.
2. Once it is inserted, release
the hose tab.
3. Turn the adaptor in a clockwise
direction to secure it in place.
7
IMPORTANT!: AVOID INFLATING THE OBJECTS ABOVE
THE RECOMMENDED INFLATION PRESSURE. THIS MAY
LEAD TO DAMAGE AND/OR INJURIES.
WARNING!: COMPRESSED AIR CAN BE A
DANGEROUS FORM OF ENERGY. GREAT CARE IS
REQUIRED WHEN USING THE COMPRESSOR AND ITS
ACCESSORIES.
8
13
9 10
14
11 12
A
B
C
Especificaciones del producto
| Marca: | Ozito |
| Categoría: | Compresor |
| Modelo: | ACK-0015 |
¿Necesitas ayuda?
Si necesitas ayuda con Ozito ACK-0015 haz una pregunta a continuación y otros usuarios te responderán
Compresor Ozito Manuales
9 Octubre 2024
14 Septiembre 2024
13 Septiembre 2024
13 Septiembre 2024
6 Septiembre 2024
20 Agosto 2024
19 Agosto 2024
Compresor Manuales
- Compresor DeWalt
- Compresor Airpress
- Compresor Ferm
- Compresor Gude
- Compresor Draper
- Compresor Black And Decker
- Compresor Vonroc
- Compresor Stanley
- Compresor Hyundai
- Compresor Metabo
- Compresor Parkside
- Compresor Meec Tools
- Compresor Auto Joe
- Compresor Hikoki
- Compresor Sun Joe
- Compresor Hazet
- Compresor Einhell
- Compresor Senco
- Compresor Unimac
- Compresor Powerplus
- Compresor Porter-Cable
- Compresor Boss
- Compresor Laica
- Compresor Topcraft
- Compresor Scheppach
- Compresor Bavaria
- Compresor Technaxx
- Compresor Nilfisk
- Compresor Duro
- Compresor Omnitronic
- Compresor Zipper
- Compresor Fieldmann
- Compresor Eventide
- Compresor Truper
- Compresor Abac
- Compresor Kibani
- Compresor Cocraft
- Compresor Herkules
- Compresor Toolcraft
- Compresor Aerotec
- Compresor SPL
- Compresor Westfalia
- Compresor Holzmann
- Compresor POWERNAIL
- Compresor Anova
- Compresor Pansam
- Compresor Global
- Compresor Freeman
- Compresor Airman
- Compresor Merlin
- Compresor Duro Pro
- Compresor WilTec
- Compresor Cartrend
- Compresor MSW
- Compresor OKAY
- Compresor Robust
- Compresor Proviel
- Compresor Alphacool
- Compresor ExelAir
- Compresor TJM
- Compresor Prowork
- Compresor CMI
- Compresor TAURUS Titanium
Últimos Compresor Manuales
27 Octubre 2024
21 Octubre 2024
21 Octubre 2024
21 Octubre 2024
15 Octubre 2024
15 Octubre 2024
13 Octubre 2024
9 Octubre 2024
3 Octubre 2024
2 Octubre 2024