Ozito LCD-2050 Manual de Usario
Ozito
taladradora
LCD-2050
Lee a continuación 📖 el manual en español para Ozito LCD-2050 (18 páginas) en la categoría taladradora. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/18
CORDLESS
DRILL
DRIVER
12V Lithium Ion
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 12V
Chuck Size: 10mm Keyless
No Load Speed: 0-400 / 0-1500/min
Torque Setting: 21
Max. Torque: 14Nm
Battery Power: 1.5Ah Lithium Ion
Charge time: 1Hr (Fast Charger)
Weight: 1.2kg
LCD-2050
WHAT’S IN THE BOX
Cordless Drill Driver
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be replaced in accordance
with the terms of this warranty. Lithium Ion batteries are covered
by a 12 month warranty. Warranty excludes consumable parts, for
example: included accessories, etc.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
12V Battery x 2
0616
Charging Adaptor &
Fast Charging Cradle
Belt Clip
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT SETUP & PREPARATION
1. CHARGING STAND
1 Keyless Chuck
2 Torque Adjustment Collar
3 LED Work Light
4 Variable Speed Trigger
5 Battery Release Button
6 12V Battery
7 Forward/ Reverse Lever
8 Gear Selector Switch
CORDLESS DRILL DRIVER
1 2 3 4 5
109
6
11
7 8
12
9 Fast Charging Cradle
10 USB Output
11 Charging Adaptor
12 Charging Jack
13 Belt Clip
Note: Once fully charged, all green lights will be illuminated.
13
ACCESSORIES
WARNING! THE POWER SUPPLY FOR THIS CHARGER IS
RECOMMENDED FOR USE WITH A RESIDUAL CURRENT
DEVICE (RATED AT 30mA OR LESS).
Charging the Battery Using the Charging Stand
Charging a USB Device
2 Slide the battery onto the
cradle. The rst 2 lights will
illuminate when battery is
properly connected and is
charging.
2 To start charging the USB
device, press the power button
on the charging cradle.
1 Plug charging
jack into the fast
charging cradle.
The rst green
light will illuminate
when connected.
1 While connected
to power, USB
devices can be
plugged into the
front of the cradle
for charging.
3. KEYLESS CHUCK
Installing a Drill Bit
Removing a Drill Bit
1 Rotate the chuck collar anti-
clockwise to open the chuck
1 Open the chuck by rotating the
chuck collar and remove the
drill bit.
3 Tighten the chuck by turning
clockwise.
2 Insert the drill bit,
making sure it
is centred in the
chuck.
4 Pull on the bit to
ensure it is rmly
secured.
CAUTION: TO REDUCE THE RISK OF INJURY WE
RECOMMEND THE USE OF GLOVES WHEN HANDLING
DRILL BITS.
WARNING! ENSURE THE TOOL IS DISCONNECTED
FROM THE POWER SUPPLY BEFORE PERFORMING ANY
OF THE FOLLOWING OPERATIONS.
2. BATTERY
Installing the Battery Pack
1 Slide the battery into the drill base until it clicks into place.
Note: Once fully charged, the green LED light will be illuminated.
Removing the Battery Pack
1 Hold down the battery release
button and then slide the
battery out.
Charging the Battery Directly
2 The red LED light will
illuminate while charging.
1 Plug charging jack
directly into the
top of the battery
Especificaciones del producto
| Marca: | Ozito |
| Categoría: | taladradora |
| Modelo: | LCD-2050 |
¿Necesitas ayuda?
Si necesitas ayuda con Ozito LCD-2050 haz una pregunta a continuación y otros usuarios te responderán
taladradora Ozito Manuales
15 Octubre 2024
30 Septiembre 2024
8 Septiembre 2024
4 Septiembre 2024
31 Agosto 2024
26 Agosto 2024
19 Agosto 2024
19 Agosto 2024
18 Agosto 2024
18 Agosto 2024
taladradora Manuales
- taladradora Bosch
- taladradora AEG
- taladradora DeWalt
- taladradora Silverline
- taladradora Ferm
- taladradora Workzone
- taladradora Gude
- taladradora Makita
- taladradora Tryton
- taladradora Hitachi
- taladradora Black And Decker
- taladradora Vonroc
- taladradora Maestro
- taladradora Stanley
- taladradora Skil
- taladradora Hyundai
- taladradora Yato
- taladradora Hilti
- taladradora Ryobi
- taladradora Festool
- taladradora Metabo
- taladradora Parkside
- taladradora Worx
- taladradora Meec Tools
- taladradora Milwaukee
- taladradora Hikoki
- taladradora Sun Joe
- taladradora Hazet
- taladradora Einhell
- taladradora Baumr-AG
- taladradora Maktec
- taladradora Bort
- taladradora Tanaka
- taladradora Craftsman
- taladradora Malmbergs
- taladradora Power Craft
- taladradora Powerplus
- taladradora Porter-Cable
- taladradora Cotech
- taladradora Genesis
- taladradora Eibenstock
- taladradora Topcraft
- taladradora Scheppach
- taladradora Gamma
- taladradora Clas Ohlson
- taladradora Powerfix
- taladradora Carat
- taladradora Kress
- taladradora Bavaria
- taladradora Flex
- taladradora Duro
- taladradora Berner
- taladradora Mafell
- taladradora Fieldmann
- taladradora Max
- taladradora Truper
- taladradora Kinzo
- taladradora Bruder Mannesmann
- taladradora Powerblade
- taladradora Meister Craft
- taladradora Rupes
- taladradora Batavia
- taladradora Proxxon
- taladradora Protool
- taladradora Westfalia
- taladradora Economy
- taladradora Holzmann
- taladradora Fein
- taladradora Huvema
- taladradora Black Decker
- taladradora Stomer
- taladradora Elu
- taladradora Max Bahr
- taladradora Lux Tools
- taladradora Goon
- taladradora Wolfcraft
- taladradora Dedra
- taladradora Kreg
- taladradora Wurth
- taladradora Spit
- taladradora Global
- taladradora Rok
- taladradora Profitech
- taladradora Graphite
- taladradora Narex
- taladradora Rikon
- taladradora Duro Pro
- taladradora Baier
- taladradora Alpha Tools
- taladradora RUKO
- taladradora Felisatti
- taladradora MSW
- taladradora Ribimex
- taladradora Robust
- taladradora Einhell Bavaria
- taladradora Ergotools Pattfield
- taladradora MyTool
- taladradora McKenzie
- taladradora G-Technology
- taladradora Rodcraft
- taladradora Bavaria By Einhell
- taladradora Handwerk
- taladradora Stalco
Últimos taladradora Manuales
27 Octubre 2024
24 Octubre 2024
23 Octubre 2024
21 Octubre 2024
19 Octubre 2024
19 Octubre 2024
19 Octubre 2024
18 Octubre 2024
16 Octubre 2024
16 Octubre 2024